Upload Button Icon Add office photos

Filter interviews by

Integrated Wireless Solutions RF Engineer Interview Questions, Process, and Tips

Updated 10 Mar 2024

Top Integrated Wireless Solutions RF Engineer Interview Questions and Answers

Integrated Wireless Solutions RF Engineer Interview Experiences

2 interviews found

RF Engineer Interview Questions & Answers

user image Anonymous

posted on 10 Mar 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. What are the parameters in LTE?
  • Ans. 

    Parameters in LTE include bandwidth, frequency, modulation scheme, coding scheme, and transmission power.

    • Bandwidth: Determines the amount of frequency spectrum allocated for LTE transmission.

    • Frequency: Specifies the carrier frequency used for LTE communication.

    • Modulation scheme: Defines how data is encoded onto the carrier signal.

    • Coding scheme: Determines the error correction capabilities of the LTE system.

    • Transmission...

  • Answered by AI
  • Q2. What is VoLTE and explain shortly?
  • Ans. 

    VoLTE stands for Voice over LTE, which allows voice calls to be made over a 4G LTE network.

    • VoLTE uses IP packets to transmit voice calls over LTE networks

    • Provides higher quality voice calls compared to traditional 2G/3G networks

    • Enables faster call setup times and improved battery life on smartphones

    • Supports features like HD voice, video calling, and simultaneous voice and data usage

    • Examples: Verizon's HD Voice, AT&T's

  • Answered by AI
  • Q3. What are the types of Handover
  • Ans. 

    Types of handover include hard handover, soft handover, and softer handover.

    • Hard handover involves breaking the connection with the current cell before establishing a connection with the new cell.

    • Soft handover allows the mobile device to communicate with multiple cells simultaneously before switching to the new cell.

    • Softer handover is a variation of soft handover where the mobile device communicates with multiple secto...

  • Answered by AI
  • Q4. If hand over not defined in between two cells what will happen?
  • Ans. 

    Call will be dropped when moving from one cell to another

    • Handover is essential for seamless transition between cells

    • Without handover, call quality may degrade or call may be dropped

    • Handover ensures continuity of service as user moves between cells

  • Answered by AI

Skills evaluated in this interview

RF Engineer Interview Questions & Answers

user image Anonymous

posted on 11 Oct 2023

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. They will provide training
  • Q2. They will provide training , we have to pay
  • Q3. They train, we have to pay
Round 3 - Aptitude Test 

It's all about ground job. No fixed location. You have to travel across the country border. But, after getting 2 years of experience your demand will be high in telecom circle.

RF Engineer Interview Questions Asked at Other Companies

asked in Qualcomm
Q1. What is modulation, and what are the different types of modulatio ... read more
asked in Qualcomm
Q2. Where can you different types analog modulation schemes?
asked in Qualcomm
Q3. What is the propagation delay in Electromagnetic wave?
asked in Qualcomm
Q4. What is a standing wave in a transmission line?
asked in Qualcomm
Q5. What is VSWR and what is the need for it?

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Antenna basics and its parameters.
  • Q2. How to design an array antenna.
  • Ans. 

    Array antennas are designed by arranging multiple antenna elements in a specific configuration to achieve desired radiation pattern and performance.

    • Determine the desired radiation pattern and performance requirements

    • Select the type of array configuration (linear, planar, conformal, etc.)

    • Calculate the spacing between antenna elements based on wavelength and array factor

    • Design feeding network to properly feed each antenn...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. What is your previous work?
  • Q2. Base on the previous works, basics questions have been asked/

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on basics and practical aspects as well.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Basic questions on antenna parameters.
  • Q2. Design aspects of Antenna array.
  • Ans. 

    Antenna array design involves elements such as element spacing, beamforming techniques, and array geometry.

    • Element spacing determines the directivity and beamwidth of the array.

    • Beamforming techniques like phase shifting and amplitude tapering help steer the beam in a desired direction.

    • Array geometry, such as linear, planar, or conformal arrays, affects the radiation pattern and polarization.

    • Antenna array design also co...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Theoretical understanding on base station antenna.
  • Q2. How will you get the tilt in the base station antenna?
  • Ans. 

    The tilt in the base station antenna can be adjusted by physically changing the angle of the antenna.

    • Tilt can be adjusted by loosening the bolts on the antenna mount and manually changing the angle of the antenna

    • Specialized tools like tilt meters can be used to ensure the correct angle is achieved

    • Remote electrical tilt (RET) systems can also be used to adjust the tilt of the antenna electronically

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare basic understanding on antenna and base station antenna.

I applied via Recruitment Consulltant and was interviewed in May 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Self introduction, What is previous experience, technical interview

Interview Preparation Tips

Topics to prepare for NR Switch N Radio Services RF Engineer interview:
  • Communication Skills
Interview preparation tips for other job seekers - First of all if you have technical knowledge very well, but communication knowledge is very important for career opportunities, you will have to fluent speaking english
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Discussing about troubleshooting process in NOC.

Round 3 - Technical 

(1 Question)

  • Q1. GPON, DWDM, Switch.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for GPON,DWDM,Cisco Router & Switches.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Sep 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Profile discussion, job designation discussion, further opportunities discussion
Round 3 - Technical 

(1 Question)

  • Q1. Network engineering questions Spectrum analyser, ITSM tool knowledge, hfc engineering network questions like network outage locating issue and isolating it.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be practical to what you know speak it confidentially. Be clear what you are speaking, show some good value of confidence.
Good organisation for long term working.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Question on Linked-list 1. Reverse the single linked-list. 2. Add node at last and front of linked-list. 3. Stack questions. 4. 3gpp spec questions. MAC/RLC/PDCP
Round 3 - HR 

(1 Question)

  • Q1. 1. Salary expectation 2. How you handle pressure in tough situations.

Interview Preparation Tips

Interview preparation tips for other job seekers - Read more on Data-structure and 3gpp specs. They will mostly ask questions related to networks, memory layout and 3gpp spec
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basic python questions
Round 3 - One-on-one 

(1 Question)

  • Q1. About your profile and project.

Interview Preparation Tips

Interview preparation tips for other job seekers - Not much learning. Good work Life balance.

Interview Questionnaire 

2 Questions

  • Q1. Wahi is the 4G parameters in kpi.
  • Ans. 

    4G parameters in KPI are key performance indicators that measure the performance of a 4G network.

    • 4G parameters in KPI include metrics such as signal strength, signal quality, throughput, latency, and handover success rate.

    • These parameters help assess the overall performance and quality of a 4G network.

    • For example, signal strength is measured in dBm and indicates the power level of the received signal.

    • Throughput measure...

  • Answered by AI
  • Q2. What is SINR.
  • Ans. 

    SINR stands for Signal-to-Interference-plus-Noise Ratio, a measure of signal quality in wireless communication.

    • SINR is a ratio of the desired signal power to the interference and noise power.

    • It is used to evaluate the quality of a wireless signal in a given environment.

    • Higher SINR values indicate better signal quality and stronger signal-to-noise ratio.

    • SINR is commonly used in cellular networks to optimize network perf

  • Answered by AI

Integrated Wireless Solutions Interview FAQs

How many rounds are there in Integrated Wireless Solutions RF Engineer interview?
Integrated Wireless Solutions interview process usually has 2 rounds. The most common rounds in the Integrated Wireless Solutions interview process are Technical, Resume Shortlist and Aptitude Test.
What are the top questions asked in Integrated Wireless Solutions RF Engineer interview?

Some of the top questions asked at the Integrated Wireless Solutions RF Engineer interview -

  1. If hand over not defined in between two cells what will happ...read more
  2. What are the parameters in L...read more
  3. What is VoLTE and explain short...read more

Tell us how to improve this page.

Integrated Wireless Solutions RF Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Telstra Interview Questions
4.0
 • 49 Interviews
Ciena Interview Questions
4.2
 • 39 Interviews
RadiSys Interview Questions
4.0
 • 38 Interviews
CommScope Interview Questions
3.8
 • 34 Interviews
Tikona Infinet Interview Questions
3.5
 • 30 Interviews
Spectranet Interview Questions
3.7
 • 18 Interviews
Mitel Interview Questions
3.5
 • 17 Interviews
View all
Integrated Wireless Solutions RF Engineer Salary
based on 91 salaries
₹1.8 L/yr - ₹4.5 L/yr
32% less than the average RF Engineer Salary in India
View more details

Integrated Wireless Solutions RF Engineer Reviews and Ratings

based on 57 reviews

3.4/5

Rating in categories

3.7

Skill development

3.2

Work-life balance

2.9

Salary

2.8

Job security

3.4

Company culture

2.9

Promotions

3.3

Work satisfaction

Explore 57 Reviews and Ratings
RF Engineer
91 salaries
unlock blur

₹1.8 L/yr - ₹4.5 L/yr

Telecom Engineer
82 salaries
unlock blur

₹1.9 L/yr - ₹4.2 L/yr

Network Engineer
42 salaries
unlock blur

₹2.2 L/yr - ₹6.5 L/yr

Quality Engineer
35 salaries
unlock blur

₹2.2 L/yr - ₹4.3 L/yr

Senior Telecom Engineer
21 salaries
unlock blur

₹3 L/yr - ₹5 L/yr

Explore more salaries
Compare Integrated Wireless Solutions with

Tata Communications Transformation Services

4.0
Compare

Tikona Infinet

3.5
Compare

Telenor

4.1
Compare

Excitel Broadband

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview