Filter interviews by
I applied via Naukri.com and was interviewed in Aug 2021. There were 4 interview rounds.
Top trending discussions
I applied via Walk-in and was interviewed before Dec 2022. There were 2 interview rounds.
Safety precautions and responsibilities of a safety officer at the worksite.
Identifying and assessing potential hazards in the workplace
Developing and implementing safety policies and procedures
Conducting regular safety inspections and audits
Providing safety training and education to employees
Investigating accidents and incidents, and implementing corrective actions
Ensuring compliance with safety regulations and standa...
I am a dedicated Safety Officer with 5 years of experience in implementing safety protocols and ensuring compliance with regulations.
Bachelor's degree in Occupational Health and Safety
Certified Safety Professional (CSP)
Experience conducting safety audits and inspections
Proficient in developing safety training programs
Strong knowledge of OSHA regulations
The responsibility of a Safety Officer is to ensure the workplace is compliant with safety regulations and to implement safety protocols to prevent accidents.
Develop and implement safety policies and procedures
Conduct regular safety inspections and audits
Provide safety training to employees
Investigate accidents and incidents to determine root causes
Maintain safety records and reports
I applied via Walk-in and was interviewed in Jan 2024. There were 2 interview rounds.
Its pretty simple and asked about lifting and excavation
The th ein on l oil and gas in the
I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 3 interview rounds.
Related oil &gas , experienced based quastions
I applied via Job Portal
I appeared for an interview in Aug 2021.
Discuss
I applied via Walk-in and was interviewed in Oct 2022. There were 3 interview rounds.
About industrial safety, civil work , mechanical work (fabrication erection lifting)
Answers to questions related to safety officer role
Critical lifting refers to lifting operations that involve heavy loads or hazardous materials
Tandan lifting is a lifting technique where two cranes are used to lift a load in tandem
The capacity of a full body harness depends on the manufacturer and model, but it should be able to support the weight of the user and any equipment they are carrying
Documents required for v...
Colour codes for lifting belt and general safety equipment
Lifting belt colour code: Green for general purpose, yellow for chemical resistance, orange for high temperature, blue for food grade
General safety equipment colour code: Red for fire fighting, yellow for caution, green for first aid, blue for information
Colour codes may vary depending on industry and region
I applied via Recruitment Consulltant and was interviewed in Aug 2022. There were 3 interview rounds.
Risk assessment is the process of identifying, analyzing, and evaluating potential risks to determine the likelihood and impact of harm.
Identify potential hazards
Assess the likelihood and severity of harm
Evaluate the risk and determine appropriate control measures
Review and update the assessment regularly
Examples: workplace safety, environmental risks, financial risks
Job safety analysis is a process of identifying potential hazards and risks associated with a job or task.
It involves breaking down a job into individual steps
Identifying potential hazards and risks associated with each step
Developing controls and procedures to eliminate or reduce the risks
Ensuring that the controls and procedures are communicated to all workers involved in the job
Regularly reviewing and updating the j
Accident investigation involves gathering information, analyzing evidence, and identifying root causes.
Interview witnesses and gather statements
Examine the accident scene and collect physical evidence
Review safety procedures and training records
Identify contributing factors and root causes
Develop recommendations to prevent future accidents
Legal compliance of safety refers to the laws and regulations that organizations must follow to ensure workplace safety.
Organizations must comply with federal, state, and local safety regulations
Safety standards must be established and communicated to employees
Regular safety inspections and audits must be conducted
Accidents and incidents must be reported and investigated
Training and education programs must be provided ...
IS codes for fire extinguishers are standards set by the Bureau of Indian Standards (BIS) for ensuring quality and safety.
IS 15683:2006 - Specification for ABC powder type fire extinguishers
IS 13849:1993 - Specification for water type fire extinguishers
IS 940:2002 - Specification for carbon dioxide type fire extinguishers
IS 10204:1983 - Specification for foam type fire extinguishers
IS 13385:1992 - Specification for dry
OHS policy falls under Section 41-F of the Factories Act.
OHS policy is covered under the Factories Act, which is a comprehensive legislation governing the safety, health, and welfare of workers in factories.
Section 41-F of the Factories Act deals with the provisions related to the health and safety policy of the factory.
The OHS policy should be in writing and should be communicated to all workers in the factory.
The pol...
There are 5 types of fire extinguishers: water, foam, powder, CO2, and wet chemical.
Water extinguishers are used for Class A fires involving paper, wood, and textiles.
Foam extinguishers are used for Class A and B fires involving flammable liquids.
Powder extinguishers are used for Class A, B, and C fires involving flammable gases.
CO2 extinguishers are used for Class B and electrical fires.
Wet chemical extinguishers are ...
I appeared for an interview before Aug 2022.
Safety officers are responsible for ensuring the safety of employees in the workplace by implementing safety protocols and procedures.
Develop and implement safety policies and procedures
Conduct regular safety inspections and audits
Provide safety training to employees
Investigate accidents and incidents to determine root causes
Ensure compliance with safety regulations and standards
Maintain safety records and reports
JSA stands for Job Safety Analysis and SOP stands for Standard Operating Procedure. JSA is a process used to identify and control hazards while SOP is a set of step-by-step instructions to carry out routine operations.
JSA involves breaking down a job into its individual tasks, identifying potential hazards, and determining the safest way to perform the job.
SOP provides detailed instructions on how to perform a specific...
Confined space is an area that is not designed for continuous occupancy, has limited entry and exit points, and may have hazardous conditions.
Limited entry and exit points
Not designed for continuous occupancy
May contain hazardous conditions such as lack of oxygen or presence of toxic gases
Emergency situations can be controlled by having a well-defined emergency response plan, training employees on emergency procedures, conducting regular drills, and ensuring proper communication channels.
Develop a comprehensive emergency response plan outlining roles and responsibilities during emergencies
Train employees on emergency procedures and protocols to ensure they know how to respond effectively
Conduct regular ...
Managerial function involves planning, organizing, leading, and controlling activities within an organization.
Planning: Setting goals, objectives, and strategies to achieve them.
Organizing: Structuring resources and tasks to accomplish the goals.
Leading: Motivating, guiding, and supervising employees.
Controlling: Monitoring performance and taking corrective actions.
Example: A safety officer may plan safety protocols, o...
based on 2 reviews
Rating in categories
Assistant Manager
59
salaries
| ₹6.8 L/yr - ₹15 L/yr |
Operations Engineer
41
salaries
| ₹2.8 L/yr - ₹6 L/yr |
Junior Engineer
39
salaries
| ₹2 L/yr - ₹6.1 L/yr |
Shift Engineer
34
salaries
| ₹2.2 L/yr - ₹7.7 L/yr |
Senior Engineer
31
salaries
| ₹5.8 L/yr - ₹11 L/yr |
GAIL
Petrofac
Schlumberger
Saudi Aramco