Upload Button Icon Add office photos

Filter interviews by

Imperial Electric Company Divisional Incharge Interview Questions and Answers

Updated 11 Jun 2024

Imperial Electric Company Divisional Incharge Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is current
  • Ans. 

    Current refers to the flow of electric charge in a circuit or the present time.

    • Current is measured in Amperes (A)

    • There are two types of current - direct current (DC) and alternating current (AC)

    • In a circuit, current flows from the positive terminal of the voltage source to the negative terminal

    • Current can be calculated using Ohm's Law: I = V/R, where I is current, V is voltage, and R is resistance

  • Answered by AI
  • Q2. Why transformer rated as KVA?
  • Ans. 

    Transformers are rated in KVA because it represents the apparent power capacity of the transformer, taking into account both the voltage and current.

    • KVA takes into account both the voltage and current, providing a more accurate representation of the transformer's capacity

    • KVA is a unit of apparent power, which is the combination of real power (KW) and reactive power (KVAR)

    • KVA rating helps in determining the maximum load...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Previous salary.
  • Q2. Expected salary.

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. How about your previous company experience?
  • Q2. I was tell about my roles and what type of work I have done.

Interview Preparation Tips

Interview preparation tips for other job seekers - Very easy interview questions I had faced.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Accounts related
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Project details

I applied via Monster and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Do u know Electrical load calculation
  • Ans. 

    Yes, electrical load calculation is the process of determining the amount of power that a building or electrical system requires.

    • Electrical load calculation involves considering the power requirements of various electrical devices and appliances in a building or system.

    • Factors such as voltage, current, and power factor are taken into account during the calculation.

    • Load calculation helps in determining the appropriate s...

  • Answered by AI
  • Q2. Site experince
  • Q3. Achievement in carrer
  • Ans. 

    Developed a new power distribution system for a large manufacturing plant, resulting in a 20% increase in efficiency.

    • Designed and implemented a new power distribution system for a large manufacturing plant

    • Collaborated with a team of engineers and technicians to ensure successful installation and operation

    • Resulted in a 20% increase in efficiency and significant cost savings for the company

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company. Need to explain in detail

I applied via Company Website and was interviewed before Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

12 Questions

  • Q1. 1. Make a layout of combined cycle power plant with different structures and components.
  • Ans. 

    Layout of combined cycle power plant with different structures and components.

    • Combined cycle power plant consists of gas turbine, heat recovery steam generator, and steam turbine.

    • Gas turbine generates electricity by burning natural gas or oil.

    • Heat recovery steam generator recovers waste heat from gas turbine exhaust and generates steam.

    • Steam turbine generates additional electricity using the steam produced by heat reco...

  • Answered by AI
  • Q2. 2 How you design machine foundation for Gas turbine. which are the different types of machine foundations.
  • Ans. 

    Designing machine foundation for gas turbine involves several factors and types of foundations.

    • Factors to consider include soil type, turbine size and weight, seismic activity, and environmental conditions.

    • Types of foundations include block, pile, and raft foundations.

    • Block foundations are suitable for smaller turbines on stable soil.

    • Pile foundations are used for larger turbines or unstable soil.

    • Raft foundations are us...

  • Answered by AI
  • Q3. 3. How you do ductile detailing for beam , column and foundation . which are the IS code you use for ductile detailing.
  • Ans. 

    Ductile detailing for beam, column, and foundation involves following IS codes and ensuring proper reinforcement placement.

    • For beams, IS 13920 is followed and reinforcement is placed at the bottom of the beam.

    • For columns, IS 13920 and IS 456 are followed and reinforcement is placed in a spiral pattern.

    • For foundations, IS 13920 and IS 2911 are followed and reinforcement is placed in a specific pattern based on the type ...

  • Answered by AI
  • Q4. 4.what are the different type of pile foundation and how you design them .
  • Ans. 

    Pile foundations are used to transfer loads from structures to soil. Different types include driven piles, bored piles, and screw piles.

    • Driven piles are installed by hammering or vibrating them into the ground.

    • Bored piles are created by drilling a hole and then filling it with concrete and steel reinforcement.

    • Screw piles are twisted into the ground using a hydraulic motor.

    • Design considerations include soil type, load c...

  • Answered by AI
  • Q5. 5. How you design shear wall and how you detail it .
  • Ans. 

    Shear walls are designed to resist lateral forces. Detailing includes reinforcement placement and anchorage.

    • Design shear walls based on the building code requirements and structural analysis.

    • Select appropriate materials and thickness for the shear wall.

    • Detail the reinforcement placement and anchorage to ensure proper load transfer.

    • Provide adequate boundary elements and openings for ducts and pipes.

    • Consider seismic and ...

  • Answered by AI
  • Q6. 6. which are the different software you are using for structural analysis.
  • Ans. 

    I have experience with various software for structural analysis.

    • STAAD.Pro

    • SAP2000

    • ETABS

    • ANSYS

    • AutoCAD Structural Detailing

  • Answered by AI
  • Q7. 7. How you model raft foundation or shear wall in finet element method.
  • Ans. 

    To model raft foundation or shear wall in finite element method, one needs to follow certain steps.

    • First, create a 3D model of the foundation or wall using a CAD software.

    • Next, import the model into a finite element analysis software.

    • Define the material properties and boundary conditions.

    • Mesh the model to create finite elements.

    • Solve the model to obtain the stresses and displacements.

    • Finally, analyze the results and ma...

  • Answered by AI
  • Q8. 8. How you design water retaining structures. which is the IS code you use for water retaining structures. and what is the crack width for water retaining structures.
  • Ans. 

    Water retaining structures are designed as per IS code and crack width is limited to ensure safety.

    • Design of water retaining structures involves determining the loads, selecting materials, and ensuring stability.

    • IS 3370 is the code used for design of water retaining structures in India.

    • The crack width for water retaining structures is limited to 0.2 mm to ensure safety and prevent leakage.

    • Various types of water retaini...

  • Answered by AI
  • Q9. 9. Have you worked with international codes like American and British codes .
  • Ans. 

    Yes, I have worked with both American and British codes.

    • I have experience working with the International Building Code (IBC) which is based on American codes.

    • I have also worked with British Standards (BS) such as BS 5950 for structural steel design.

    • I am familiar with the differences between the two codes and can adapt accordingly.

  • Answered by AI
  • Q10. 10. What are the different load combination for RCC and Steal structures .
  • Ans. 

    Different load combinations for RCC and Steel structures.

    • Load combinations for RCC structures include dead load, live load, wind load, earthquake load, and temperature load.

    • Load combinations for Steel structures include dead load, live load, wind load, earthquake load, temperature load, and snow load.

    • Load combinations are determined based on the design codes and standards applicable to the project.

    • The load combinations...

  • Answered by AI
  • Q11. 11. Do you have exposure of site inspection and can you make progress and quality report .
  • Ans. 

    Yes, I have extensive experience in site inspections and creating progress and quality reports.

    • I have conducted site inspections for various projects in my previous roles.

    • I am proficient in creating detailed progress and quality reports based on my observations during site inspections.

    • I have also implemented corrective actions based on the findings of my inspections to ensure project success.

    • For example, in my previous...

  • Answered by AI
  • Q12. 12. Draw a bending moment and shear fonce diagram for portal frame with lateral force and UDL .
  • Ans. 

    To draw a bending moment and shear force diagram for a portal frame with lateral force and UDL.

    • Calculate the reactions at the supports

    • Determine the shear force and bending moment at each section

    • Plot the shear force and bending moment diagrams

    • Identify the maximum shear force and bending moment

    • Consider the sign conventions for shear force and bending moment

    • Use appropriate software or tools for accurate results

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - you should be perfect in design aspect and fundamentals, different codes and state of art software which you using.

Skills evaluated in this interview

I appeared for an interview before Dec 2021.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. SLD related questions
Round 3 - One-on-one 

(1 Question)

  • Q1. Substation layout APFC relay Motor protection circuit
Round 4 - HR 

(1 Question)

  • Q1. Expected Salary Notice Period

Interview Preparation Tips

Interview preparation tips for other job seekers - Know your JD and Salary well before joining. Good organization with nice office colleague
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the applications of motor starters?
  • Q2. What are the fundamentals of the power triangle?

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on fundamentals.

I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Substation questions
  • Q2. Primary engineering questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company to work for so give your best try to get done
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Can you describe a challenging engineering project you've worked on, and how did you overcome obstacles? What software and tools are you proficient in for civil engineering design and analysis? How do yo...
  • Ans. Challenging Engineering Project: During my internship, I was involved in a complex bridge construction project with tight deadlines. We encountered unforeseen soil stability issues. To overcome this, I collaborated closely with geotechnical experts, adjusted the foundation design, and extended work hours. Effective communication and teamwork helped us successfully address the challenges and complete the project on ti...
  • Answered Anonymously
  • Q2. What are your long-term career goals in civil engineering, and how do you plan to achieve them? How do you handle unexpected changes or setbacks on a construction project? Can you discuss any internships...
Round 3 - Technical 

(2 Questions)

  • Q1. Can you explain the concept of load-bearing capacity in structural engineering?
  • Ans. 

    Load-bearing capacity in structural engineering refers to the maximum load a structure can support without failing.

    • Load-bearing capacity is determined by factors such as material strength, design, and support conditions.

    • Structural engineers calculate load-bearing capacity to ensure safety and prevent structural failure.

    • Examples of load-bearing elements include columns, beams, and foundations.

    • Load-bearing capacity can b...

  • Answered by AI
  • Q2. What is the purpose of a geotechnical investigation, and how is it conducted?
  • Ans. 

    A geotechnical investigation is conducted to assess the soil and rock conditions at a site for construction projects.

    • Determines the suitability of the site for construction

    • Identifies potential risks such as landslides, soil liquefaction, or sinkholes

    • Helps in designing foundations and earthworks

    • Involves drilling boreholes, taking soil samples, and conducting laboratory tests

    • Results in a geotechnical report with recommen

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Build a Strong Foundation: Ensure you have a solid understanding of core engineering principles and concepts. A strong academic foundation is essential for success in the field.



Soft Skills: Develop strong communication, teamwork, and problem-solving skills. These are highly valued in the workplace and can set you apart from other candidates



Tailored Resumes and Cover Letters: Customize your

Imperial Electric Company Interview FAQs

How many rounds are there in Imperial Electric Company Divisional Incharge interview?
Imperial Electric Company interview process usually has 2 rounds. The most common rounds in the Imperial Electric Company interview process are Technical and HR.
What are the top questions asked in Imperial Electric Company Divisional Incharge interview?

Some of the top questions asked at the Imperial Electric Company Divisional Incharge interview -

  1. Why transformer rated as K...read more
  2. What is curr...read more

Tell us how to improve this page.

Imperial Electric Company Divisional Incharge Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Electrical Engineer
19 salaries
unlock blur

₹1.8 L/yr - ₹4 L/yr

Assistant Manager
11 salaries
unlock blur

₹3.2 L/yr - ₹7.5 L/yr

Supervisor
11 salaries
unlock blur

₹2.1 L/yr - ₹4 L/yr

Electrical Supervisor
10 salaries
unlock blur

₹1.2 L/yr - ₹3 L/yr

Catering Executive
10 salaries
unlock blur

₹2.5 L/yr - ₹3.5 L/yr

Explore more salaries
Compare Imperial Electric Company with

Sterling & Wilson

4.1
Compare

Nasser S. Al Hajri Corporation

3.6
Compare

Navayuga Engineering Company

3.9
Compare

B.L. Kashyap & Sons

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview