Add office photos
Filter interviews by
ICON SYSTEMS Engineer Interview Questions, Process, and Tips
ICON SYSTEMS Engineer Interview Experiences
1 interview found
amit padhy
Interview Questionnaire
4 Questions
- Q1. What is spc plan
- Ans.
SPC plan stands for Statistical Process Control plan which is a quality control method used to monitor and control a process.
SPC plan involves collecting and analyzing data to identify and eliminate sources of variation in a process.
It helps in maintaining consistency and improving the quality of the product or service.
SPC plan includes tools like control charts, histograms, and Pareto charts.
It is widely used in manuf...
- Q2. What is corrective action & preventive action
- Ans.
Corrective action is taken to address an existing problem while preventive action is taken to avoid future problems.
Corrective action is reactive while preventive action is proactive
Corrective action is taken after a problem has occurred while preventive action is taken before a problem occurs
Corrective action aims to fix the root cause of a problem while preventive action aims to eliminate the possibility of a problem
...
- Q3. What is pareto analysis
- Ans.
Pareto analysis is a technique used to identify and prioritize the most important factors or problems based on their frequency or impact.
It is also known as the 80/20 rule, where 80% of the effects come from 20% of the causes.
It involves creating a histogram to identify the frequency of problems or factors.
The factors are then ranked in order of importance based on their impact or frequency.
It helps in focusing on the ...
- Q4. How to devlope ur suppliers
- Ans.
Developing suppliers involves building strong relationships, setting clear expectations, and providing support.
Establish open communication channels
Provide feedback and guidance
Offer training and resources
Set clear performance expectations
Collaborate on cost-saving initiatives
Top trending discussions
Interview questions from similar companies
Anonymous
Selected
I applied via Company Website and was interviewed in Dec 2024. There was 1 interview round.
(2 Questions)
- Q1. Define BGP timers
- Q2. OSPF areas
Multiple choice questions
(1 Question)
- Q1. Iot, esp8266, linux commands
(1 Question)
- Q1. Salary discuss, place of living
(1 Question)
- Q1. QC tools ,7 qc tool
Interview Preparation Tips
(2 Questions)
- Q1. Brief about resume
- Q2. Project related questions
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 5 interview rounds.
(1 Question)
- Q1. NABL, HVAC related all questions
(1 Question)
- Q1. NABL HVAC related questions in second round also.
(1 Question)
- Q1. Salary discussion
(2 Questions)
- Q1. HR & plant head round ...
- Q2. Introduction, 3-4 technical questions also...
Selected
I applied via Naukri.com and was interviewed before Jul 2023. There were 4 interview rounds.
Math, Reasoning, verbility
(11 Questions)
- Q1. What is the Wire Colour coding
- Ans.
Wire colour coding is a standard method of identifying the function of different wires in electrical systems.
In North America, the standard wire colour coding for AC power circuits is black for hot, white for neutral, and green or bare copper for ground.
In Europe, the standard wire colour coding for AC power circuits is brown for live, blue for neutral, and green/yellow for ground.
Different industries may have their ow...
- Q2. What is the Crimping
- Ans.
Crimping is a process of joining two pieces of metal or other materials by deforming one or both of them to hold the other.
Crimping is commonly used in electrical work to join wires to connectors.
It is also used in plumbing to connect pipes together.
Crimping tools are often used to create a secure connection.
- Q3. What is the HV
- Ans.
HV stands for High Voltage, which refers to electrical potential difference between two points that exceeds the safe threshold.
HV is typically considered to be any voltage above 1000 volts.
High Voltage is commonly used in power transmission and distribution systems.
HV can be dangerous and requires proper safety precautions when working with it.
- Q4. What is the HV and air leak test and why is required for Customer
- Ans.
HV and air leak tests are essential for ensuring safety and quality of products before delivery to customers.
HV test, or high voltage test, is conducted to check insulation integrity and electrical safety of the product.
Air leak test is performed to verify the sealing integrity of the product, ensuring no leaks that could compromise performance or safety.
These tests are required for customers to guarantee that the prod...
- Q5. How to Control Quality of Insulation
- Ans.
Quality of insulation can be controlled through proper material selection, installation techniques, and regular inspections.
Selecting high-quality insulation materials with appropriate R-values for the specific application
Ensuring proper installation techniques are followed to minimize gaps and air leaks
Conducting regular inspections to check for signs of wear, damage, or moisture intrusion
Using thermal imaging technol...
- Q6. What is HST and Why HST is using in the wire harness
- Ans.
HST stands for Heat Shrink Tubing, used in wire harness for insulation and protection.
HST is a type of tubing that shrinks when heat is applied, providing insulation and protection to wires in a harness.
It helps in preventing short circuits, abrasion, and moisture damage.
HST is commonly used in automotive, aerospace, and electronics industries.
Examples of HST brands include 3M, TE Connectivity, and Panduit.
- Q7. What is thermistor and How many type of thermistor
- Ans.
A thermistor is a type of resistor whose resistance changes significantly with temperature. There are two main types: NTC (Negative Temperature Coefficient) and PTC (Positive Temperature Coefficient).
Thermistors are commonly used in temperature sensing applications.
NTC thermistors have a negative temperature coefficient, meaning their resistance decreases as temperature increases.
PTC thermistors have a positive tempera...
- Q8. What is EMC testing
- Ans.
EMC testing is the process of evaluating and verifying the electromagnetic compatibility of electronic devices.
EMC testing ensures that electronic devices do not interfere with each other's operation
It also ensures that electronic devices are not susceptible to interference from external sources
Common EMC tests include radiated emissions, conducted emissions, and immunity testing
EMC testing is important for compliance ...
- Q9. What is Ferrite Core and why it is use .
- Ans.
Ferrite core is a magnetic core made of ferrite material used in electronic components for its high magnetic permeability and low electrical conductivity.
Ferrite core is commonly used in transformers, inductors, and electromagnets.
It helps increase the inductance and efficiency of electronic components.
Ferrite cores are also used in noise suppression filters to reduce electromagnetic interference.
They are preferred ove...
- Q10. What is EV and type of EV
- Ans.
EV stands for Electric Vehicle, which is a vehicle that runs on electricity instead of gasoline.
Types of EVs include Battery Electric Vehicles (BEVs), Plug-in Hybrid Electric Vehicles (PHEVs), and Hybrid Electric Vehicles (HEVs).
BEVs run solely on electricity stored in batteries and do not have a gasoline engine.
PHEVs have both an electric motor and a gasoline engine, allowing them to switch between electric and gasoli...
- Q11. Parabolic Equation and what a in parabolic Equation
- Ans.
A parabolic equation is a second-degree polynomial equation in the form y = ax^2 + bx + c, where 'a' is the coefficient of the x^2 term.
A parabolic equation is a type of quadratic equation that forms a U-shaped curve when graphed.
The coefficient 'a' in a parabolic equation determines the direction and width of the parabola. A positive 'a' value opens upwards, while a negative 'a' value opens downwards.
For example, the ...
What is EV and What is role in green environment
(4 Questions)
- Q1. Why are you joining our Company
- Q2. What is your sallary expectations
- Ans.
My salary expectations are based on my experience, qualifications, and the industry standard.
Consider my years of experience in the field
Research the average salary range for this position in the industry
Take into account my qualifications and skills
Open to negotiation based on benefits package
- Q3. Tell me about your self
- Q4. Tell me your achievement and Goal
Interview Preparation Tips
anthuwan Panneerselvam
(1 Question)
- Q1. Technical rounds live coding solve data structures and algorithms
Leet code
Interview Preparation Tips
Data structures and algorithms
Devops pipeline
Deployment architecture
Interview Questionnaire
1 Question
- Q1. Basics of edc,analog,maxwells equation,digital
I applied via Walk-in and was interviewed in Jan 2020. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. What's your value of life
- Q2. What about yourself and why do select these field
Interview Preparation Tips
Simple, I thinking about my future during sad and happiness.. Because life is combined both.. My value of life should be positive. And negligible of negative things.. Think only what is your strength and weakness.. This is possibility to success
Adding 2nd
Your background
ICON SYSTEMS Interview FAQs
Tell us how to improve this page.
Engineer Interview Questions from Similar Companies
|
QA Engineer
4
salaries
|  ₹2 L/yr - ₹2.9 L/yr |
|
Accountant
3
salaries
| ₹2.2 L/yr - ₹2.4 L/yr |
|
System Administrator
3
salaries
| ₹2 L/yr - ₹2.2 L/yr |
Vivo
Reliance Digital
Nokia
Yazaki
- Home >
- Interviews >
- ICON SYSTEMS Interview Questions >
- ICON SYSTEMS Engineer Interview Questions
