Filter interviews by
Cooling towers are used in industrial processes to remove heat from a system by evaporating water.
Cooling towers use the process of evaporation to remove heat from a system
Water is circulated through the tower and exposed to air, causing some of it to evaporate and cool down
The cooled water is then circulated back into the system to absorb more heat
Common types of cooling towers include natural draft, mechanical draft,...
RO plant works by using a semi-permeable membrane to remove impurities from water.
Water is pushed through the membrane under pressure
Impurities are left behind while clean water passes through
The purified water is collected for use
RO plants are commonly used for desalination and water purification
I applied via Recruitment Consulltant and was interviewed before May 2021. There were 4 interview rounds.
HT (High Tension) and LT (Low Tension) refer to different voltage levels in electrical systems, crucial for power distribution.
HT refers to voltages above 1000 volts, used for transmission over long distances.
LT refers to voltages below 1000 volts, typically used for residential and commercial supply.
Example of HT: 11 kV or 33 kV transmission lines.
Example of LT: 230 V or 400 V supply for homes and small businesses.
HT ...
Transformers are electrical devices that convert voltage levels and come in various types for different applications.
1. Step-up Transformer: Increases voltage, used in power plants.
2. Step-down Transformer: Decreases voltage, used in residential areas.
3. Isolation Transformer: Provides electrical isolation, used in sensitive equipment.
4. Auto Transformer: Has a single winding, used for voltage regulation.
5. Three-phase...
AC motors use alternating current, while DC motors use direct current, leading to different operational characteristics.
AC motors are typically used in industrial applications due to their efficiency and simplicity.
DC motors provide better speed control and are commonly used in electric vehicles and robotics.
AC motors can be synchronous or asynchronous, while DC motors can be brushed or brushless.
Example: Induction mot...
Top trending discussions
A bike is a two-wheeled vehicle powered by pedals, while a car is a four-wheeled motor vehicle used for transportation.
Bike is a two-wheeled vehicle that is typically powered by pedals.
Car is a four-wheeled motor vehicle that is powered by an engine.
Bikes are commonly used for recreational purposes or short distance commuting.
Cars are used for longer distance travel and transportation of goods or passengers.
A tyre rim is the outer edge of a wheel that holds the tyre in place.
The tyre rim is typically made of metal or alloy.
It provides a stable base for the tyre to be mounted on.
The rim size is an important factor in determining the size of tyre that can be fitted.
Common rim sizes include 15 inches, 17 inches, and 20 inches.
Rim design can vary, with options like spoke rims, alloy rims, and steel rims.
I am interested in Ashok Leyland because of its reputation in the industry. I believe my skills in management and leadership can contribute to the company's growth.
Ashok Leyland has a strong presence in the commercial vehicle industry
The company has a reputation for innovation and quality
I am impressed by the company's commitment to sustainability and social responsibility
As Deputy Manager, I will use my skills in mana...
Aerodynamics degree of freedom refers to the number of independent variables required to describe the motion of an object in a fluid.
Aerodynamics degree of freedom is determined by the number of independent variables required to describe the motion of an object in a fluid.
The degree of freedom is dependent on the number of dimensions in which the object is moving.
For example, a two-dimensional object moving in a fluid ...
CFD in SMAC involves solving fluid dynamics equations using staggered grids for improved accuracy and stability.
Staggered grids help in better representation of velocity and pressure fields, reducing numerical errors.
In SMAC (Simplified Marker and Cell) method, staggered grids allow for more accurate tracking of fluid interfaces.
Example: In a staggered grid, pressure is calculated at cell centers while velocity is at c...
I chose the automobile industry because of my passion for cars and the opportunity to work with advanced technology.
Passion for cars and automobiles
Opportunity to work with advanced technology
Fascination with the industry's constant innovation and development
Desire to be a part of a dynamic and exciting field
Interest in the business and marketing aspects of the industry
posted on 13 Dec 2017
I applied via Naukri.com and was interviewed before Dec 2016. There were 6 interview rounds.
I appeared for an interview in Jul 2017.
I applied via Campus Placement
posted on 25 Jan 2021
I applied via Naukri.com and was interviewed before Jan 2020. There was 1 interview round.
I expect a salary that reflects my skills, experience, and the industry standards for this role.
Research industry standards: For example, similar roles in our region typically offer between $60,000 and $80,000.
Consider my experience: With over 5 years in management, I bring valuable skills that can enhance team performance.
Discuss benefits: Salary is important, but I also value benefits like health insurance and retire...
I have lived in Maharashtra for 5 years.
I have lived in Mumbai, Pune, and Nagpur.
During my time in Maharashtra, I worked as a Sales Manager for a retail company.
I am familiar with the local culture, language, and business practices.
I applied via Naukri.com and was interviewed before Oct 2019. There were 5 interview rounds.
I am very confident in delivering the expected output.
I have a proven track record of meeting and exceeding expectations in my previous roles.
I am highly organized and detail-oriented, ensuring that all tasks are completed accurately and on time.
I am proactive in identifying potential issues and taking steps to address them before they become problems.
I am open to feedback and willing to make adjustments to ensure that...
based on 3 interview experiences
based on 4 reviews
Rating in categories
Assistant Manager
631
salaries
| ₹9.3 L/yr - ₹16.5 L/yr |
Deputy Manager
467
salaries
| ₹11 L/yr - ₹23.5 L/yr |
Manager
299
salaries
| ₹15 L/yr - ₹41 L/yr |
Senior Executive
291
salaries
| ₹6.9 L/yr - ₹13.8 L/yr |
Executive
227
salaries
| ₹3.6 L/yr - ₹8.5 L/yr |
Ashok Leyland
Hero MotoCorp
TVS Motor
Hyundai Motor India Limited