Filter interviews by
posted on 20 Mar 2024
I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.
Heat transfer in heat exchanger involves the exchange of thermal energy between two fluids without mixing them.
Heat exchangers are used to transfer heat between two fluids at different temperatures.
The fluids can flow in parallel or counterflow to maximize heat transfer efficiency.
Common types of heat exchangers include shell and tube, plate, and finned tube.
Heat transfer in heat exchangers can be enhanced by using fin
Distillation is a process used to separate components of a liquid mixture based on their different boiling points.
Distillation involves heating a liquid mixture to create vapor, then cooling the vapor to condense it back into liquid form.
The components with lower boiling points will vaporize first and be collected separately from those with higher boiling points.
Common examples of distillation include the production of...
Pump cavitation is the formation of vapor bubbles in a liquid due to low pressure at the pump inlet.
Occurs when the pressure at the pump inlet drops below the vapor pressure of the liquid
Can lead to damage to the pump components and reduced efficiency
Symptoms include noise, vibration, and reduced flow rate
Prevented by ensuring proper suction conditions and maintaining adequate NPSH (Net Positive Suction Head)
A heat exchanger is a device used to transfer heat between two or more fluids, typically to cool or heat a process stream.
Heat exchangers can be found in various applications such as HVAC systems, refrigeration units, and chemical processing plants.
They work by transferring heat from one fluid to another through a solid wall without the fluids mixing.
Common types of heat exchangers include shell and tube, plate, and fi...
Top trending discussions
I applied via Recruitment Consulltant and was interviewed before Nov 2021. There were 2 interview rounds.
I am a dedicated and experienced Production Officer with a strong background in managing production processes and ensuring efficiency.
Experienced in overseeing production operations and implementing strategies to improve productivity.
Skilled in coordinating with cross-functional teams to meet production targets and deadlines.
Proficient in analyzing production data and identifying areas for improvement.
Knowledgeable in ...
Productivity is a measure of the efficiency and output of a production process or individual.
Productivity is the ratio of output to input.
It measures how efficiently resources are used to produce goods or services.
Higher productivity indicates higher output with the same or fewer resources.
Productivity can be measured at various levels - individual, team, department, or organization.
Examples of productivity measures in...
Grinding machines are used for various purposes in production, such as surface grinding, cylindrical grinding, and tool and cutter grinding.
Surface grinding machines are used to produce a smooth finish on flat surfaces.
Cylindrical grinding machines are used to grind the outer surface of cylindrical workpieces.
Tool and cutter grinding machines are used to sharpen and reshape cutting tools.
Other types of grinding machine...
Grinding media commonly used in production include steel balls, ceramic beads, and cylpebs.
Steel balls are widely used in grinding operations due to their high hardness and impact resistance.
Ceramic beads are often used for fine grinding and dispersing applications.
Cylpebs, which are cylindrical in shape, are used in certain grinding processes for specific applications.
Other types of grinding media may also be used dep...
posted on 2 Oct 2024
I applied via Walk-in and was interviewed before Oct 2023. There was 1 interview round.
posted on 14 Dec 2020
posted on 3 Mar 2023
I applied via Approached by Company and was interviewed in Feb 2023. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed before Oct 2023. There were 3 interview rounds.
Unit operations involve physical changes in the material, while unit processes involve chemical changes.
Unit operations involve physical processes like mixing, crushing, distillation, filtration, etc.
Unit processes involve chemical reactions like oxidation, reduction, hydrolysis, etc.
Unit operations are usually used in the initial stages of production, while unit processes are used in the later stages.
Unit operations f...
Types of reactors include batch reactors, continuous stirred-tank reactors, plug flow reactors, and fluidized bed reactors.
Batch reactors: Used for small-scale production and testing.
Continuous stirred-tank reactors: Ideal for continuous production with uniform mixing.
Plug flow reactors: Allow for efficient heat transfer and minimal back-mixing.
Fluidized bed reactors: Suitable for high-temperature reactions and catalys
Types of agitators include paddle agitators, anchor agitators, turbine agitators, and propeller agitators.
Paddle agitators are used for low viscosity fluids and gentle mixing.
Anchor agitators are used for viscous fluids and provide good radial mixing.
Turbine agitators are used for high viscosity fluids and provide high shear mixing.
Propeller agitators are used for low viscosity fluids and provide axial flow mixing.
Gas drying is used to remove moisture from gases, while steam drying is used to remove moisture from solids or liquids.
Gas drying involves passing a gas stream through a desiccant material to remove moisture, commonly used in natural gas processing.
Steam drying involves using steam to evaporate moisture from solids or liquids, commonly used in food processing or paper production.
Gas drying is more suitable for removing...
Heat exchangers are devices used to transfer heat between two or more fluids at different temperatures.
Types of heat exchangers include shell and tube, plate heat exchangers, and finned tube heat exchangers.
Shell and tube heat exchangers consist of a shell with tubes running through it, allowing one fluid to flow through the tubes while another flows over the tubes.
Plate heat exchangers use metal plates to transfer hea...
posted on 18 Dec 2023
I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.
posted on 2 Mar 2024
I applied via Referral and was interviewed in Feb 2024. There was 1 interview round.
posted on 17 Jul 2024
Our equipments include state-of-the-art machinery and tools designed for precision and efficiency.
We have a range of equipment for various tasks such as drilling, cutting, welding, and measuring.
Some examples of our equipment include CNC machines, laser cutters, 3D printers, and precision measuring tools.
Our equipment is regularly maintained and upgraded to ensure optimal performance and safety.
I applied via Naukri.com and was interviewed before Jul 2023. There was 1 interview round.
I was responsible for managing a team of sales representatives and achieving sales targets.
Managed a team of sales representatives
Set and achieved sales targets
Developed sales strategies
Provided training and support to team members
I have appointed 15 dealers for market expansion.
Appointed 15 dealers to expand market presence
Implemented strategic plans to identify and onboard new dealers
Regularly monitored dealer performance and provided necessary support
Successfully increased market reach and sales through dealer network
based on 1 interview
Interview experience
Junior Supervisor
46
salaries
| ₹2 L/yr - ₹4 L/yr |
Shift Superintendent
15
salaries
| ₹3.1 L/yr - ₹5.2 L/yr |
Production Supervisor
10
salaries
| ₹2 L/yr - ₹4 L/yr |
Diploma Trainee Engineer
9
salaries
| ₹1.5 L/yr - ₹2.3 L/yr |
Supervisor
9
salaries
| ₹2.5 L/yr - ₹5 L/yr |
Cohizon Life Sciences Limited
British Paints
Galva Decoparts
HEUBACH Colour