AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Hindustan Zinc Instrument Engineer Interview Questions, Process, and Tips for Experienced
Hindustan Zinc Instrument Engineer Interview Experiences for Experienced
1 interview found
Interview Questionnaire
4 Questions
- Q1. What is the diffrence between RTD and thermocouple?
- Ans.
RTD measures temperature using resistance while thermocouple uses voltage difference.
RTD has higher accuracy and stability than thermocouple.
RTD is more expensive than thermocouple.
RTD is suitable for precise temperature measurement while thermocouple is better for high temperature measurement.
RTD has a linear relationship between resistance and temperature while thermocouple has a non-linear relationship.
Examples of R...
- Q2. How we know the RTD showing correct temperature only use multimeter ?
- Ans.
Correct temperature indication by RTD can be verified using multimeter.
Check the resistance value of RTD using multimeter and compare it with the standard resistance-temperature chart.
Ensure that the RTD is properly connected to the measuring instrument and there are no loose connections.
Perform a calibration check periodically to ensure accurate temperature measurement.
Use a reference thermometer to cross-check the te...
- Q3. Can we use 0-10 v in plc?
- Ans.
Yes, 0-10 V can be used in PLC as an analog input or output signal.
PLCs typically have analog input and output modules that can handle 0-10 V signals.
The signal can be used to measure or control variables such as temperature, pressure, or flow.
The resolution and accuracy of the signal depend on the PLC and the analog module used.
Some PLCs may require additional scaling or conversion of the signal to match the desired r...
- Q4. What is dry and wet wiring in plc ?
- Ans.
Dry wiring refers to wiring without any external protection, while wet wiring involves the use of protective coatings or materials.
Dry wiring is typically used in low-risk environments where there is no chance of moisture or other contaminants damaging the wiring.
Wet wiring is used in high-risk environments where moisture or other contaminants are present, such as in chemical plants or outdoor installations.
Examples of...
Interview Preparation Tips
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
I applied via Approached by Company and was interviewed before May 2021. There were 2 interview rounds.
(1 Question)
- Q1. DM water parameter . Cold startup Coal analysis.
Interview Preparation Tips
- Boiler Operations
- Turbine operation
- Electrical protection
Assistant Manager Interview Questions & Answers
Vedanta Resources
Aditya Sharma
posted on 19 May 2017
I appeared for an interview in Oct 2016.
Interview Questionnaire
6 Questions
- Q1. Introduce yourself.
- Ans.
Experienced retail professional with strong leadership skills and a passion for customer service.
Over 5 years of retail management experience
Proven track record of increasing sales and improving customer satisfaction
Strong leadership and team-building skills
Passionate about providing excellent customer service
Bachelor's degree in Business Administration
- Q2. How is alumina obtained from bauxite?
- Ans.
Alumina is obtained from bauxite through the Bayer process.
Bauxite is crushed and mixed with sodium hydroxide to form a slurry.
The slurry is heated and pressurized in a digester to dissolve the alumina content.
The resulting solution is cooled and filtered to remove impurities.
The purified solution is then heated to precipitate the alumina as a white powder.
The alumina powder is washed, dried, and calcined to produce pu...
- Q3. Reaction for Al extraction from alumina.
- Ans.
The reaction for Al extraction from alumina involves the reduction of alumina using carbon or electrolysis.
Alumina (Al2O3) is first converted into aluminum chloride (AlCl3) by reacting with hydrochloric acid.
The aluminum chloride is then reduced to aluminum metal by either carbon reduction or electrolysis.
In carbon reduction, carbon (usually in the form of coke) is heated with the aluminum chloride to produce aluminum ...
- Q4. Stainless steel production.
- Q5. Types of cast iron.
- Ans.
There are four main types of cast iron: gray iron, white iron, ductile iron, and malleable iron.
Gray iron is the most common type and has excellent castability and good machinability.
White iron is very hard and brittle, often used for wear-resistant applications.
Ductile iron has high strength and ductility, making it suitable for a wide range of applications.
Malleable iron is heat-treated to improve its strength and du
- Q6. Location constraints and little info about family.
Interview Preparation Tips
Experience: Basic Aptitude and Verbal Test - Easy Questions
Tips: Improve Speed and Accuracy
Duration: 30 minutes
Total Questions: 35
Round: Group Discussion
Experience: Two sects formed; one supporting the argument and other opposing it. Wage gap, Indian Mine Law, social pressure, patriarchal mentality and crime against women were discussed.
Tips: Communication skills are more important than content. Show confidence and speak fluently. Factual and grammatical errors can be ignored.
Duration: 15 minutes
Round: Technical + HR Interview
Experience: They were chilled out and were giving time to speak. Little hints were also being given.
Tips: Be thorough with basics and don't give nonsensical answers if you don't know.
Skills: Technical Knowledge(ML
College Name: NIT Raipur
Selected
I appeared for an interview before Mar 2024.
(1 Question)
- Q1. Introduction & JD related queries & questions
Interview Preparation Tips
Assistant Manager Interview Questions & Answers
CMR Green Technologies
Anonymous
posted on 20 Feb 2025
I appeared for an interview before Feb 2024.
(1 Question)
- Q1. Past company details
(2 Questions)
- Q1. Furnace maintenance
- Q2. Hydraulic and pneumatic system
(1 Question)
- Q1. PLC, HMI, sensor
(1 Question)
- Q1. Motor, protection, relay
Selected
I applied via Referral and was interviewed before Sep 2022. There were 4 interview rounds.
(1 Question)
- Q1. Protections and Interlock, Light Up procedures
(1 Question)
- Q1. Interaction, Asking about previous plants
(1 Question)
- Q1. Salary negotiations
(1 Question)
- Q1. Job experience details
Selected
I applied via Campus Placement and was interviewed before Oct 2023. There was 1 interview round.
GD on the Topic - Quality of coal is deteriorating, what should the company do?
Assistant Manager Interview Questions & Answers
CMR Green Technologies
Anonymous
posted on 13 Jul 2024
Selected
I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.
(2 Questions)
- Q1. What is the name of furnace?
- Ans.
The name of the furnace is typically based on its function or design, such as blast furnace, muffle furnace, or electric furnace.
Furnaces can be named based on their heating method, such as electric, gas, or oil furnace
Some furnaces are named after their specific function, like blast furnace used in metal smelting
Others may be named after their design, such as muffle furnace used for controlled heating
- Q2. Flux percentage??
What are the daily work and what is the reporting procedure?
(2 Questions)
- Q1. What is expected salary
- Q2. How much man power you control in daily shift
Assistant Manager Interview Questions & Answers
CMR Green Technologies
Anonymous
posted on 22 Dec 2023
Selected
I applied via Recruitment Consulltant and was interviewed before Dec 2022. There were 5 interview rounds.
Basic mathematics and english
(1 Question)
- Q1. About yourself and salary
(4 Questions)
- Q1. What is hyper seever
- Ans.
Hyper Server is a high-performance server software that enables efficient data processing and communication.
Hyper Server is designed to handle large volumes of data and perform complex computations.
It provides fast and reliable communication between clients and servers.
Hyper Server is commonly used in industries such as finance, telecommunications, and scientific research.
Examples of Hyper Server implementations includ...
- Q2. Network-load-balancing
- Q3. Firewall configurations
- Q4. Active Directory Administration
(1 Question)
- Q1. Salary expectations and notice period
Skills evaluated in this interview
Hindustan Zinc Interview FAQs
Tell us how to improve this page.
Hindustan Zinc Interviews By Designations
- Hindustan Zinc Assistant Manager Interview Questions
- Hindustan Zinc Mining Engineer Interview Questions
- Hindustan Zinc Mechanical Engineer Interview Questions
- Hindustan Zinc Associate Manager Interview Questions
- Hindustan Zinc Accountant Interview Questions
- Hindustan Zinc Electrical Engineer Interview Questions
- Hindustan Zinc Graduate Trainee Interview Questions
- Hindustan Zinc Financial Analyst Interview Questions
- Show more
Interview Questions for Popular Designations
- Instrumentation Technician Interview Questions
- Control & Instrumentation Engineer Interview Questions
- Instrumentation Supervisor Interview Questions
- Manager Instrumentation Interview Questions
- Senior Instrument Engineer Interview Questions
- Instrument & Control Engineer Interview Questions
- Senior Instrumentation Technician Interview Questions
- QC Inspector Instrumentation Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
Hindustan Zinc Instrument Engineer Reviews and Ratings
based on 5 reviews
Rating in categories
|
Assistant Manager
240
salaries
|  ₹6 L/yr - ₹14 L/yr |
|
Associate Manager
222
salaries
| ₹7 L/yr - ₹22 L/yr |
|
Deputy Manager
195
salaries
| ₹11 L/yr - ₹35.5 L/yr |
|
Mining Engineer
121
salaries
| ₹3 L/yr - ₹12 L/yr |
|
Manager
89
salaries
| ₹12.8 L/yr - ₹40 L/yr |
Hindalco Industries
Rungta Mines
Vedanta Resources
Adani Enterprises
- Home >
- Interviews >
- Hindustan Zinc Interview Questions >
- Hindustan Zinc Instrument Engineer Interview Questions for Experienced
