AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Hindustan PowerProjects Graduate Engineer Trainee (Get) Interview Questions and Answers
Hindustan PowerProjects Graduate Engineer Trainee (Get) Interview Experiences
1 interview found
I applied via Campus Placement and was interviewed in Feb 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. What is ESP?
- Ans.
ESP stands for Electrostatic Precipitator, a device used to remove particulate matter from industrial exhaust gases.
ESP uses electrostatic forces to remove particles from exhaust gases.
It consists of a series of plates with an electric charge that attracts and collects particles.
ESP is commonly used in power plants, cement factories, and steel mills to reduce air pollution.
The efficiency of ESP depends on factors such ...
- Q2. Define corona discharge?
- Ans.
Corona discharge is a phenomenon where a partial discharge occurs in a gas due to a high electric field.
Occurs when the electric field around a conductor is high enough to ionize the surrounding air molecules
Results in a visible glow or hissing sound
Can cause damage to electrical equipment and power transmission lines
Used in some industrial processes such as ozone generation
- Q3. Explain your final year project
Interview Preparation Tips
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
Graduate Engineer Trainee (Get) Interview Questions & Answers
L&T Power
Anonymous
posted on 1 Sep 2017
I appeared for an interview in Aug 2017.
Interview Questionnaire
1 Question
- Q1. Fourier law, Bernoulli equation, Navier stokes equation (derivation), shell and tube heat exchanger, NPSH, cavitation, centrifugal pumps. Some questions on your Summer Internship.
Interview Preparation Tips
Experience: Shortlisting according to CGPA
CGPA>6.5
NO ACTIVE BACKLOG
Round: Test
Experience: Aptitude had 75 questions to be answered in 60 minutes
Technical had 47 questions to be answered in 30 minutes.
Technical (Chemical engineering) had basic questions from distillation, thermodynamics, mechanical operations, heat transfer, fluid mechanics, fuels and combustion (coal related questions)
Duration: 1 hour 30 minutes
Total Questions: 122
Round: Group Discussion
Experience: GD was a non elimination round
Duration: 20 minutes
Round: Technical + HR Interview
Experience: Prepare 2 subjects thoroughly.
They will ask basic questions from your favourite subjects.
College Name: NIT Durgapur
Graduate Engineer Trainee (Get) Interview Questions & Answers
L&T Power
Anonymous
posted on 25 Sep 2017
I appeared for an interview before Sep 2016.
Interview Questionnaire
1 Question
- Q1. Transformers specifications in detail
- Ans.
Transformers specifications include power rating, voltage ratio, impedance, cooling method, and insulation class.
Power rating determines the maximum amount of power a transformer can handle.
Voltage ratio defines the ratio between the primary and secondary voltages.
Impedance indicates the resistance to the flow of current in the transformer.
Cooling method can be air, oil, or water-cooled, depending on the transformer's ...
Interview Preparation Tips
Experience: I don't remember exactly but mostly 75%to 80% were technical question and remaining of aptitude.
Tips: Stick to basic of technical things. If you understand basic properly, you can crack any twisted question.
Duration: 1 hour
Total Questions: 100
Round: Technical Interview
Tips: Understand the specifications of any machine.
College Name: Birla Vishvakarma Mahavidyalaya (BVM) Engineering College
Graduate Engineer Trainee (Get) Interview Questions & Answers
Tata Power
Arka Dipta Das
posted on 10 Feb 2015
Interview Preparation Tips
Experience: A candidate has to go through 12 rounds of GD. The unique style of group discussion was exhilarating. It reduced the stress and increased my confidence.
Tips: Pay attention to what others say. Do seize the chances to speak. Do use hand gestures when explaining your views. Don't interrupt someone unnecessarily. Show good team spirit. Agree with and support others whose views you like. Present views in an organized manner.
Duration: 72 minutes
Round: Technical Interview
Experience: The interviewers were highly experienced and progressed through the questionnaire dispassionately without revealing their thoughts about me. They did ask me a few "ice-breaker" questions which helped calm my nerves and then they launched into the technical section. According to my observation, the interviewers were inclined to know how much practical knowledge and experience I had. Their questions were aimed at knowing how passionately I have undertaken my summer trainings and projects.
Tips: I had thoroughly studied about the company and their projects. Keeping in mind that the company stresses on latest technology, I studied about a few related new technologies in the power sector too. My resume was impressive as far as I know, so it helped. The "reference" section in a resume is important too and in case the interviewer recognises the references, it boosts your image. The bottom line is, one needs to prove that he/she is at ease with the job profile and life in the power sector.
College Name: KIIT University
Interview Questionnaire
7 Questions
- Q1. Tell me about your extracurricular activities
- Ans.
I am actively involved in community service and sports.
Volunteer at local food bank
Coach youth soccer team
Participate in charity runs
Attend fitness classes at gym
- Q2. Questions based on your projects
- Q3. Questions based on your area of interest
- Q4. Some basic quiestions
- Q5. Why you want to join NTPC?
- Ans.
I want to join NTPC because of its reputation as a leading power company and its commitment to sustainable development.
NTPC is a well-established and respected company in the power sector
I am impressed by NTPC's focus on sustainable development and renewable energy
I believe that working at NTPC will provide me with opportunities for professional growth and development
I am excited about the prospect of contributing to N...
- Q6. Why not private companies?
- Ans.
Private companies may prioritize profit over public health and safety.
Private companies may cut corners to save costs
Private companies may not have the same level of accountability as public entities
Public entities are responsible for protecting the health and safety of all citizens, not just those who can afford it
- Q7. Why not IT sectors?
- Ans.
Our company focuses on other industries with higher growth potential.
IT sector is highly competitive and saturated
Other industries have higher growth potential
Our company has expertise in other industries
Diversifying our portfolio reduces risk
Interview Preparation Tips
Experience: Based on the cg and category wise a total of 8 people were selected for interview
Round: Interview
Experience: Interview lasted 15-20 minutes.It was a panel of 6 most of them were above 40s.
General Tips: Start your preparation well in advance. chose your area of interest cautiously. Be prepared to answer any type of questions in area of interest including practical ones and current trends . Be thorough with your intern and projects.don't try to over smart them as it they are highly experienced. also one thing about PSU is that they have separate resume format. write only the things you are thorough with and be precise, no one will read lengthy paragraphs.
College Name: IIT Madras
Graduate Engineer Trainee (Get) Interview Questions & Answers
Tata Power
Anonymous
posted on 12 Feb 2021
I applied via Campus Placement and was interviewed before Feb 2020. There were 4 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Elaborate yourself
- Q2. Make a single line diagram of power system
- Ans.
A single line diagram is a simplified representation of a power system.
A single line diagram shows the electrical components of a power system in a simplified manner.
It is used to understand the flow of power and to identify potential problems.
It includes generators, transformers, transmission lines, distribution lines, and loads.
Each component is represented by a symbol and connected by lines to show the flow of power...
- Q3. Explain your journey to become an engineer
- Q4. Voltage compensation at load centre
- Ans.
Voltage compensation at load centre
Voltage drop occurs in the distribution system due to the resistance of the conductors
Voltage compensation is done to maintain the voltage level at the load center
Methods of voltage compensation include tap changing transformers, voltage regulators, and shunt capacitors
- Q5. If voltage is low then what method you use so increase voltage and tubewell is run
- Ans.
To increase voltage for running tubewell when voltage is low, use a voltage booster or stabilizer.
Use a voltage booster or stabilizer to increase voltage
Check for any loose connections or damaged wires
Ensure the tubewell motor is not overloaded
Consider installing a capacitor bank to improve power factor
Consult with an electrician if necessary
Interview Preparation Tips
Be confident in whole interview,you can switch your language during answering from English to Hindi such that you deliver your knowledge properly.
Prepare your cv properly because interviewer ask questions from that .
Graduate Engineer Trainee (Get) Interview Questions & Answers
L&T Power
Anonymous
posted on 29 May 2022
(1 Question)
- Q1. Main questions were based on basics of thermal, som, production(mainly)
Interview Preparation Tips
Selected
I applied via Campus Placement and was interviewed in Oct 2022. There were 4 interview rounds.
There are 60 Questions of aptitude including 30 questions of logical reasoning and 30 quantitive aptitude
They gives us topic of electrical vehicle pros and cons
(5 Questions)
- Q1. Stress strain Curve in SOM
- Ans.
Stress-strain curve is a graphical representation of the relationship between stress and strain in a material.
It shows how a material behaves under stress and how it deforms under strain.
It is used to determine the elastic modulus, yield strength, and ultimate strength of a material.
The curve has three regions: elastic, plastic, and fracture.
Examples of materials with different stress-strain curves include rubber, stee
- Q2. Iron carbon diagram from material Engineering
- Ans.
Iron carbon diagram is a graphical representation of the phases of iron-carbon alloys at different temperatures and carbon concentrations.
The diagram shows the relationship between carbon content, temperature, and the resulting microstructure of the alloy.
It is used to determine the properties of steel and cast iron.
The diagram consists of three regions: austenite, ferrite, and cementite.
The eutectic point on the diagr...
- Q3. Project Related questions
- Q4. Internship related questions
- Q5. Practical Examples of Engineering in surrounding
- Ans.
Engineering is all around us, from the buildings we live in to the technology we use daily.
The design and construction of buildings and infrastructure
The development of transportation systems
The creation of electronic devices and software
The design and manufacture of medical equipment
The development of renewable energy sources
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Hitachi Energy
Anonymous
posted on 22 Aug 2022
I applied via Referral and was interviewed in Jul 2022. There was 1 interview round.
(1 Question)
- Q1. Which is your fav course in college
- Ans.
My favorite course in college was Computer Science.
I enjoyed learning programming languages such as Java and Python.
I found the algorithms and data structures course to be challenging but rewarding.
I appreciated the practical applications of computer science in fields such as artificial intelligence and machine learning.
I also enjoyed working on group projects and coding competitions.
Overall, computer science provided ...
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Tata Power
Anonymous
posted on 1 Feb 2023
Selected
I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.
Easy . Anybody can answer . Bbjk ghjj ghjjjjkkkk ghjj hhhh ghjj ghhh
(2 Questions)
- Q1. Relay ckt breaker ...transformar parts. Industry training
- Q2. Transformer, power system basic
Interview Preparation Tips
Hindustan PowerProjects Interview FAQs
Tell us how to improve this page.
Hindustan PowerProjects Interviews By Designations
- Hindustan PowerProjects Senior Engineer Interview Questions
- Hindustan PowerProjects Mechanical Maintenance Engineer Interview Questions
- Hindustan PowerProjects Assistant General Manager Technology Interview Questions
- Hindustan PowerProjects Assistant Manager Interview Questions
- Hindustan PowerProjects Graduate Engineer Trainee (Get) Interview Questions
- Hindustan PowerProjects Assistant Manager Procurement Interview Questions
- Hindustan PowerProjects Senior Safety Officer Interview Questions
Interview Questions for Popular Designations
- Graduate Apprentice Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Graduate Trainee Interview Questions
- Graduate Engineer Interview Questions
- Production Graduate Engineer Trainee Interview Questions
- Graduate Student Interview Questions
- Graduate Apprentice Interview Questions
- Post Graduate Engineer Trainee [pget] Interview Questions
- Show more
Graduate Engineer Trainee (Get) Interview Questions from Similar Companies
Fast track your campus placements
Hindustan PowerProjects Graduate Engineer Trainee (Get) Reviews and Ratings
based on 3 reviews
Rating in categories
|
Assistant Manager
64
salaries
|  ₹4.2 L/yr - ₹12.6 L/yr |
|
Senior Engineer
63
salaries
| ₹4 L/yr - ₹8 L/yr |
|
Engineer
43
salaries
| ₹1.8 L/yr - ₹6.1 L/yr |
|
Manager
28
salaries
| ₹9.9 L/yr - ₹21 L/yr |
|
Senior Manager
27
salaries
| ₹13.1 L/yr - ₹22 L/yr |
Adani Group
NTPC
Tata Power
Eaton
- Home >
- Interviews >
- Hindustan PowerProjects Interview Questions >
- Hindustan PowerProjects Graduate Engineer Trainee (Get) Interview Questions
