Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Hanon Systems Team. If you also belong to the team, you can get access from here

Hanon Systems Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Hanon Systems Quality Engineer Interview Questions and Answers

Updated 4 Dec 2023

Hanon Systems Quality Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical questions
  • Q2. Contour, Hardness tester

Interview Preparation Tips

Topics to prepare for Hanon Systems Quality Engineer interview:
  • Quality Control
  • Quality
Interview preparation tips for other job seekers - Nagendra

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. GD&T symbols & explanation
  • Ans. 

    GD&T symbols are used to specify geometric tolerances on engineering drawings.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the allowable variation in form and size of features on a part

    • Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position

    • GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget

  • Answered by AI
  • Q2. How to check true position on CMM
  • Ans. 

    True position on CMM can be checked using a combination of software and hardware tools.

    • Use a calibrated probe to measure the feature location

    • Compare the measured location with the nominal location

    • Calculate the deviation and compare it with the tolerance

    • Use software tools like GD&T to analyze the results

    • Ensure the CMM is calibrated and the probe is in good condition

  • Answered by AI
  • Q3. What is FMEA
  • Ans. 

    FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.

    • FMEA is used to identify potential failures in a process or product and their effects on the system.

    • It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.

    • FMEA is commonly used in industries such a...

  • Answered by AI
  • Q4. How to do instrument selection
  • Ans. 

    Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.

    • Identify the purpose of the instrument

    • Consider the accuracy and precision required

    • Evaluate the cost and availability

    • Ensure the instrument is compatible with other equipment

    • Consider the maintenance and calibration requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always have good knowledge for the things that you have added in your resume. Do not put anything that you don't know about.

Skills evaluated in this interview

I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Core Java, J2EE

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

Interview Questionnaire 

1 Question

  • Q1. Genral diploma mechanical Related question

I applied via Recruitment Consultant and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. How many level in ppap
  • Ans. 

    There are 5 levels in PPAP (Production Part Approval Process).

    • PPAP has 5 levels: Level 1, Level 2, Level 3, Level 4, and Level 5.

    • Each level represents a different stage of the PPAP process.

    • Level 1 includes documentation submission, while Level 5 involves customer approval.

    • The higher the level, the more comprehensive the PPAP requirements become.

    • PPAP is used to ensure that suppliers meet the quality standards of their c

  • Answered by AI
  • Q2. Difference between cp and cpk
  • Ans. 

    Cp measures the capability of a process to meet specifications, while Cpk measures the capability of a process to meet specifications considering centering.

    • Cp is a short-term capability index, while Cpk is a long-term capability index.

    • Cp considers only the spread of the process, while Cpk considers both the spread and the centering of the process.

    • Cp is calculated using the formula Cp = (USL - LSL) / (6 * standard devia...

  • Answered by AI
  • Q3. What is capa
  • Ans. 

    CAPA stands for Corrective and Preventive Action. It is a systematic approach to identify, investigate, and resolve quality issues.

    • CAPA is a key component of quality management systems.

    • It involves identifying the root cause of a problem, implementing corrective actions to address the immediate issue, and preventive actions to prevent recurrence.

    • CAPA processes typically include steps like problem identification, investi...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All interview are technical one. It lasted for about 1 hour 10 minutes.

I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. General questions from my experince Background.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
-

I appeared for an interview before Feb 2023.

Round 1 - Aptitude Test 

Basic logical question

Round 2 - Aptitude Test 

Reasoning ability question

Round 3 - Technical 

(2 Questions)

  • Q1. Machining questions related to GD&T
  • Q2. What is positioning tolerance
  • Ans. 

    Positioning tolerance refers to the allowable deviation from the desired position of an object or component.

    • Positioning tolerance is a measure of how much an object or component can deviate from its intended position without affecting its functionality.

    • It is typically specified in terms of a maximum allowable distance or angle.

    • For example, in manufacturing, positioning tolerance is used to ensure that parts fit togethe...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Basic question about our previous company experience
  • Q2. Basic mechanical engineering questions
Round 2 - HR 

(2 Questions)

  • Q1. Basic family background question
  • Q2. English communication

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't loose your confidence
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. Protocol relatedsuch as
  • Q2. Can protocol framing
  • Q3. Uds services and nrc code
  • Q4. Python with automation
  • Q5. Dspace, vt, aspice, xcp with automation

Interview Preparation Tips

Topics to prepare for Schaeffler India Senior Engineer interview:
  • Canoe
  • CAN protocol
  • UDS
  • Python
  • CAPL
  • Hil testing
  • DSpace
  • Software integration
  • Bug Tracking
  • Regression Testing
  • vt
  • Vt studio
  • Aspice
  • Fusa

Hanon Systems Interview FAQs

How many rounds are there in Hanon Systems Quality Engineer interview?
Hanon Systems interview process usually has 2 rounds. The most common rounds in the Hanon Systems interview process are Resume Shortlist and Technical.
What are the top questions asked in Hanon Systems Quality Engineer interview?

Some of the top questions asked at the Hanon Systems Quality Engineer interview -

  1. Contour, Hardness tes...read more
  2. Technical questi...read more

Tell us how to improve this page.

Hanon Systems Quality Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Hanon Systems Quality Engineer Salary
based on 41 salaries
₹1.2 L/yr - ₹7.3 L/yr
At par with the average Quality Engineer Salary in India
View more details

Hanon Systems Quality Engineer Reviews and Ratings

based on 5 reviews

4.0/5

Rating in categories

4.1

Skill development

4.0

Work-life balance

3.6

Salary

3.6

Job security

3.8

Company culture

3.2

Promotions

3.3

Work satisfaction

Explore 5 Reviews and Ratings
Trainee
41 salaries
unlock blur

₹0.9 L/yr - ₹2.5 L/yr

Quality Engineer
41 salaries
unlock blur

₹1.1 L/yr - ₹7.2 L/yr

Assistant Manager
40 salaries
unlock blur

₹5.5 L/yr - ₹17 L/yr

Deputy Manager
37 salaries
unlock blur

₹11 L/yr - ₹19 L/yr

Quality Inspector
34 salaries
unlock blur

₹1.2 L/yr - ₹3.2 L/yr

Explore more salaries
Compare Hanon Systems with

Bosch

4.2
Compare

Yazaki

3.8
Compare

Faurecia

3.9
Compare

DENSO

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview