Gujarat Apollo Industries Interview Questions and Answers

Q1. Tell me about your self
Add your answer
Q2. What is difference between diesel engine and petrol engine
Ans. 
Diesel engines use compression ignition while petrol engines use spark ignition.
• Diesel engines use compression ignition, where the fuel-air mixture is compressed until it spontaneously ignites.

• Petrol engines use spark ignition, where a spark plug ignites the fuel-air mixture.

• Diesel engines are more fuel efficient than petrol engines.

• Petrol engines generally have higher power output compared to diesel engines.

• Diesel eng...read more
Answered by AI
Add your answer

Q1. What is the value of CPK
Ans. 
CPK is a statistical measure used to assess the capability of a process to produce output within specification limits.
• CPK is calculated using the formula: CPK = (USL - LSL) / (6 * standard deviation)

• A CPK value greater than 1 indicates that the process is capable of producing within specification limits

• A CPK value less than 1 indicates that the process may not be capable of consistently producing within specification l
Answered by AI
Add your answer
Q2. What is Ra in roughnes tester
Ans. 
Ra in roughness tester is the average roughness value of the surface profile within a specified sampling length.
• Ra is a parameter used to quantify the roughness of a surface.

• It is calculated as the arithmetic average of the absolute values of the profile heights over the evaluation length.

• Ra provides a measure of the deviation of the surface profile from the mean line.

• It is commonly used in industries such as manufactu...read more
Answered by AI
Add your answer
Q3. What is 7Qc tool and how you used it in daily routine?
Ans. 
7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.
• Check sheets: Used to collect and analyze data in a systematic way.

• Histograms: Used to show frequency distribution of a process.

• Pareto charts: Helps identify the most significant factors contributing to a problem.

• Cause-and-effect diagrams: Used to identify and analyze potential causes of a problem.

• Scatter...read more
Answered by AI
Add your answer
Q4. 8D methodology and projects on it
Ans. 
The 8D methodology is a problem-solving approach used in quality management to identify, correct, and prevent recurring problems.
• The 8D methodology consists of 8 steps: D0 - Plan, D1 - Team Formation, D2 - Problem Description, D3 - Interim Containment Action, D4 - Root Cause Analysis, D5 - Permanent Corrective Action, D6 - Prevent Recurrence, D7 - Recognize Team Effort, D8 - Closure and Team Disbandment

• It is commonly u...read more
Answered by AI
Add your answer
Q5. Previous working related
Add your answer

Q1. Role and responsibilities
Add your answer
Q2. Job description of previous company
Ans. 
Managed and coordinated engineering projects for a construction company
• Led a team of engineers and technicians to ensure project completion within budget and schedule

• Collaborated with clients, architects, and contractors to address design issues and modifications

• Performed site visits and inspections to monitor progress and quality of work

• Prepared project reports, budgets, and schedules for management review
Answered by AI
Add your answer

Work hard, it would be worth it

Q1. It would be worth it
Add your answer
Q2. Guestimate - Estimate number of trees in campus
Ans. 
It is impossible to accurately estimate the number of trees in the campus without more information.
• The number of trees can vary greatly depending on the size of the campus

• Factors such as the type of trees, density of trees, and layout of the campus will all affect the estimate

• One possible approach could be to estimate the number of trees in a small area and then extrapolate that number to the entire campus
Answered by AI
Add your answer

Q1. Martensite formation how can reach?
Ans. 
Martensite formation can be achieved through rapid cooling of austenite.
• Martensite formation occurs when austenite is rapidly cooled below the martensite start temperature.

• The cooling rate must be fast enough to prevent the diffusion of carbon atoms, allowing them to become trapped in the crystal lattice.

• Quenching in water, oil, or air can be used to achieve the necessary cooling rate.

• Higher carbon content in the steel...read more
Answered by AI
Add your answer
Q2. Which is clean process carburizing or carbonitriding ?
Ans. 
Carburizing is a cleaner process compared to carbonitriding.
• Carburizing involves introducing carbon into the surface of a metal to increase its hardness, while carbonitriding introduces both carbon and nitrogen.

• Carburizing typically requires fewer process steps and is more cost-effective.

• Carbonitriding can lead to the formation of more complex compounds, which may require additional post-treatment processes.

• Carburizing...read more
Answered by AI
Add your answer

Q1. Basic details of your profile Work experience?
Add your answer

Q1. How to calculate market share ?
Ans. 
Market share can be calculated by dividing a company's sales revenue by the total sales revenue of the industry, then multiplying by 100.
• Calculate your company's sales revenue.

• Calculate the total sales revenue of the industry.

• Divide your company's sales revenue by the total sales revenue of the industry.

• Multiply the result by 100 to get the market share percentage.
Answered by AI
Add your answer
Q2. What is BTL And ATL Activities ?
Ans. 
BTL (Below The Line) activities are targeted marketing efforts directed towards specific individuals or groups, while ATL (Above The Line) activities are mass media advertising to reach a wider audience.
• BTL activities include direct mail, email marketing, sponsorships, events, and promotions.

• ATL activities include TV commercials, radio ads, print ads, and billboards.

• BTL activities are more personalized and targeted, wh...read more
Answered by AI
Add your answer
Q3. What is working capital?
Ans. 
Working capital is the difference between a company's current assets and current liabilities.
• Working capital is essential for a company's day-to-day operations.

• It represents the funds available for a company to use in its daily business activities.

• Formula: Working Capital = Current Assets - Current Liabilities.

• Examples: Cash, accounts receivable, inventory are current assets. Accounts payable, short-term loans are curr
Answered by AI
Add your answer
Q4. How to control employee attrition
Ans. 
Employee attrition can be controlled by focusing on employee engagement, providing growth opportunities, offering competitive compensation, and creating a positive work culture.
• Focus on employee engagement through regular feedback, recognition, and opportunities for professional development.

• Provide growth opportunities such as training programs, mentorship, and career advancement paths.

• Offer competitive compensation an...read more
Answered by AI
Add your answer
Q5. How will you do scouting for new dealer appointment
Add your answer
Q6. What is the hp range of tractors in Telangana
Ans. 
The hp range of tractors in Telangana varies from 20 hp to 75 hp.
• The hp range of tractors in Telangana typically starts from 20 hp and goes up to 75 hp.

• Different tractor models may have varying hp ranges within this overall range.

• Tractors with higher hp are usually used for heavy-duty agricultural tasks.

• Tractors with lower hp are suitable for smaller farms or lighter tasks.
Answered by AI
Add your answer
Q7. What do you know about compact tractor
Ans. 
Compact tractors are small, versatile agricultural machines used for various tasks on farms and properties.
• Compact tractors are smaller in size compared to traditional tractors, making them easier to maneuver in tight spaces.

• They are commonly used for tasks such as mowing, tilling, plowing, and landscaping.

• Compact tractors often come with attachments such as loaders, backhoes, and mowers to increase their versatility.

• T...read more
Answered by AI
Add your answer

An assignment is a piece of (academic) work or task. It provides opportunity for students to learn, practice and demonstrate they have achieved the learning goals. It provides the evidence for the teacher that the students have achieved the goals

Q1. Writing. Being able to write well and produce engaging written material is a fundamental skill for a technical writer. ... Technical knowledge. ... Research. ... Communication. ... Editing and proofreading...read more
Add your answer
Q2. The power of effective writing is immense in that it allows us to properly communicate to inform, persuade, convince, entertain, and evoke emotions. Yet that is only the tip of the iceberg.
Add your answer

Improve your speaking and reasoning skills. Before you participate in a GD, consider engaging in other public speaking opportunities to build your confidence and skills. ...
Consider your body language

Q1. Transmission working
Add your answer
Q2. Quality improvement
Add your answer

Q1. Why do you want this job?
Add your answer
Q2. I would like to join this esteemed organization and use my skills which I have acquired during my one year post graduate course and apply it to help the Tool Room to achieve new goals & heights, as well as...read more
Add your answer