Filter interviews by
Poka yoke is a Japanese term for mistake-proofing or error-proofing.
It is a quality control technique used to prevent errors or defects in a product or process.
It involves designing the process or product in a way that makes it impossible or difficult to make mistakes.
Examples include using sensors to detect errors, designing parts that can only be assembled in one way, and using checklists to ensure all steps are...
Powder coating is a dry finishing process where a powder is applied to a surface and then heated to form a hard, durable finish.
Powder coating is a type of coating that is applied as a free-flowing, dry powder.
The powder is typically made up of a mixture of finely ground particles of pigment and resin.
The powder is applied using an electrostatic spray gun, which charges the powder particles so they adhere to the s...
PT line refers to a Prothrombin Time test used to measure blood clotting ability.
PT line is a blood test used to monitor the effectiveness of blood thinning medication.
It measures the time it takes for blood to clot.
Abnormal PT line results can indicate bleeding disorders or liver disease.
It is commonly used in the medical field for patients on anticoagulant therapy.
Results are reported as a ratio of the patient's...
The question covers various quality control tools and techniques used in manufacturing and production processes.
3M refers to the three key principles of quality management: Muda (waste), Mura (unevenness), and Muri (overburden).
7QC tools are a set of quality control techniques used to identify and solve production problems. Examples include Pareto charts, fishbone diagrams, and control charts.
Kaizen is a Japanese ...
3M is a multinational conglomerate that produces a wide range of products for various industries.
Founded in 1902 in Minnesota, USA
Produces products for industries such as healthcare, automotive, electronics, and more
Known for popular products such as Post-it notes, Scotch tape, and N95 respirators
Employs over 90,000 people worldwide
5 m is a unit of measurement for length or distance.
m stands for meters, which is the base unit of length in the International System of Units (SI)
5 m is equivalent to 16.4 feet or 196.9 inches
It can be used to measure the length of a room, the distance between two points, or the height of a building
posted on 6 Jul 2019
I appeared for an interview in Jul 2019.
The question covers various quality control tools and techniques used in manufacturing and production processes.
3M refers to the three key principles of quality management: Muda (waste), Mura (unevenness), and Muri (overburden).
7QC tools are a set of quality control techniques used to identify and solve production problems. Examples include Pareto charts, fishbone diagrams, and control charts.
Kaizen is a Japanese term ...
Powder coating is a dry finishing process where a powder is applied to a surface and then heated to form a hard, durable finish.
Powder coating is a type of coating that is applied as a free-flowing, dry powder.
The powder is typically made up of a mixture of finely ground particles of pigment and resin.
The powder is applied using an electrostatic spray gun, which charges the powder particles so they adhere to the surfac...
My best kaizen project involved implementing a new quality control system that reduced defects by 30%.
Identifying areas for improvement
Involving team members in the process
Implementing changes gradually
Measuring results and adjusting as needed
Poka yoke is a Japanese term for mistake-proofing or error-proofing.
It is a quality control technique used to prevent errors or defects in a product or process.
It involves designing the process or product in a way that makes it impossible or difficult to make mistakes.
Examples include using sensors to detect errors, designing parts that can only be assembled in one way, and using checklists to ensure all steps are comp...
3M is a multinational conglomerate that produces a wide range of products for various industries.
Founded in 1902 in Minnesota, USA
Produces products for industries such as healthcare, automotive, electronics, and more
Known for popular products such as Post-it notes, Scotch tape, and N95 respirators
Employs over 90,000 people worldwide
5 m is a unit of measurement for length or distance.
m stands for meters, which is the base unit of length in the International System of Units (SI)
5 m is equivalent to 16.4 feet or 196.9 inches
It can be used to measure the length of a room, the distance between two points, or the height of a building
Top trending discussions
I applied via Company Website and was interviewed before Jun 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Feb 2021. There was 1 interview round.
ISO 9001:2015 is a quality management system standard that outlines the requirements for a company to meet customer and regulatory needs.
ISO 9001:2015 is a set of standards that focus on quality management systems
It outlines the requirements for a company to meet customer and regulatory needs
Quality tools such as Six Sigma, Lean, and Total Quality Management can be used to implement ISO 9001:2015
ISO 9001:2015 emphasize...
I appeared for an interview in Dec 2024, where I was asked the following questions.
I have over five years of experience in management roles, focusing on team leadership and operational efficiency.
Led a team of 10 in a retail environment, improving sales by 20% through effective training and motivation.
Implemented a new inventory management system that reduced stock discrepancies by 30%.
Conducted regular performance reviews, fostering a culture of feedback and continuous improvement.
Collaborated with ...
My previous organization had a hierarchical structure with clear roles, promoting efficient communication and decision-making.
The organization was divided into departments such as Sales, Marketing, and Operations, each led by a department head.
Regular cross-department meetings facilitated collaboration and alignment on company goals.
Each team had defined roles, ensuring accountability and clarity in responsibilities.
Fo...
Secondary sales refer to sales made by retailers to end consumers, rather than directly from the manufacturer.
Secondary sales involve selling products to end consumers through retailers or distributors.
These sales are important for manufacturers to reach a wider customer base.
Examples include sales through retail stores, online marketplaces, and third-party distributors.
posted on 12 Jul 2024
posted on 27 Aug 2024
Assistant Manager
165
salaries
| ₹5.5 L/yr - ₹10.2 L/yr |
Deputy Manager
112
salaries
| ₹6 L/yr - ₹15 L/yr |
Sales Executive
60
salaries
| ₹1.4 L/yr - ₹3.8 L/yr |
Interior Designer
44
salaries
| ₹2 L/yr - ₹6.3 L/yr |
Store Manager
29
salaries
| ₹3.8 L/yr - ₹7.5 L/yr |
CenturyPly
Nilkamal
Greenlam Industries
Kurlon