Upload Button Icon Add office photos

Godrej & Boyce Manufacturing

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Godrej & Boyce Manufacturing Engineer Trainee Interview Questions and Answers

Updated 27 May 2024

Godrej & Boyce Manufacturing Engineer Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

General apt Q, similar to MBA-CAT, but of half the difficulty level

Round 2 - Technical 

(2 Questions)

  • Q1. Final year project and internship details
  • Q2. All major Mech Engg subjects Q, including SOM, Thermo, mfg

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep the basics clear, be relaxed, always wear a smile on ur face no matter what

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. How to sense flow transmitter to transmit signal to controller in selected range?
  • Ans. 

    Flow transmitter senses flow and transmits signal to controller in selected range.

    • Use a flow transmitter that is capable of sensing flow and transmitting a signal.

    • Connect the flow transmitter to the controller using appropriate wiring and communication protocols.

    • Configure the flow transmitter to operate within the desired range.

    • Ensure proper calibration of the flow transmitter to accurately measure and transmit flow da...

  • Answered by AI

I applied via Company Website and was interviewed in Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Explain safety topic.
  • Ans. 

    Safety topic refers to the measures taken to prevent accidents and injuries in a workplace or any other environment.

    • Safety topic includes identifying potential hazards and taking steps to eliminate or control them.

    • It also involves providing proper training and equipment to employees to ensure their safety.

    • Regular safety inspections and audits are conducted to ensure compliance with safety regulations.

    • Examples of safety...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my diploma curriculum i.e. cement technology related topics. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

I applied via Company Website and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Training in rail wheel plant
  • Q2. Technical questions about cp vessel and pressure vessel and equipment
  • Q3. Types of equipment used in piping industry
  • Ans. 

    Various types of equipment are used in the piping industry for different purposes.

    • Pumps

    • Compressors

    • Valves

    • Heat exchangers

    • Filters

    • Storage tanks

    • Piping materials

    • Flanges

    • Gaskets

    • Instrumentation and control systems

  • Answered by AI
  • Q4. What is the standard code of pipe
  • Ans. 

    The standard code of pipe refers to the set of regulations and specifications that govern the design, construction, and use of pipes in various industries.

    • The standard code of pipe varies depending on the industry and the type of pipe being used.

    • For example, in the oil and gas industry, the American Petroleum Institute (API) provides standards for pipes used in drilling and production operations.

    • In the construction ind...

  • Answered by AI
  • Q5. Tell me about isometric drawing
  • Ans. 

    Isometric drawing is a 3D representation of an object on a 2D surface.

    • It shows all three dimensions of an object in a single view.

    • It uses a 30-degree angle for all three axes.

    • It is commonly used in engineering and construction to show piping and structural details.

    • Isometric drawings are often created using computer-aided design (CAD) software.

    • They are useful for visualizing how different parts of a system fit together.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Hello sir, I m a project engineer and doing a job for Sparsh Pvt Ltd. So I m seeking a job for best opportunity with my experience.thanku

Skills evaluated in this interview

I applied via Campus Placement and was interviewed before Jul 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What is automobile
  • Ans. 

    Automobile is a vehicle designed for transportation on roads, powered by an internal combustion engine or electric motor.

    • Automobiles are commonly known as cars, trucks, or buses.

    • They are used for personal transportation, commercial transportation, and emergency services.

    • The first automobile was invented in the late 19th century by Karl Benz.

    • Modern automobiles have advanced safety features, such as airbags and anti-lock...

  • Answered by AI
  • Q2. In stearing system which mechanism use
  • Ans. 

    The steering system uses a mechanism called the rack and pinion.

    • The rack and pinion mechanism is the most common type of steering system used in modern cars.

    • It consists of a rack (a long, flat bar with teeth on one side) and a pinion (a small gear).

    • When the driver turns the steering wheel, the pinion rotates and moves the rack, which in turn moves the wheels.

    • Other types of steering systems include recirculating ball an...

  • Answered by AI
  • Q3. Types of thread
  • Ans. 

    Threads can be classified into two types: user-level threads and kernel-level threads.

    • User-level threads are managed by the user-level thread library and are invisible to the kernel.

    • Kernel-level threads are managed by the operating system and are visible to the kernel.

    • User-level threads are faster to create and manage than kernel-level threads.

    • Examples of user-level thread libraries include POSIX threads (pthreads) and...

  • Answered by AI
  • Q4. Types of coupling
  • Ans. 

    Coupling refers to the degree of interdependence between software modules.

    • There are six types of coupling: content, common, control, stamp, data, and message.

    • Content coupling occurs when one module modifies or relies on the internal workings of another module.

    • Common coupling occurs when multiple modules share the same global data.

    • Control coupling occurs when one module controls the flow of another module.

    • Stamp coupling...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Mainly interwiew based on automobile and engineering drawing subjects

Skills evaluated in this interview

Interview Questionnaire 

6 Questions

  • Q1. 1.Tell me about your self?
  • Q2. 2.Previous company KRA
  • Ans. 

    Developed new product designs, improved existing designs, conducted testing and analysis, collaborated with cross-functional teams.

    • Designed new products to meet customer requirements

    • Improved existing product designs for better performance

    • Conducted testing and analysis to ensure product quality

    • Collaborated with cross-functional teams for project success

  • Answered by AI
  • Q3. Design rules
  • Q4. Plastic defects and features
  • Q5. Automotive structure
  • Q6. CAD Tool test

I applied via Walk-in and was interviewed before Jul 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Working of privious company

Interview Preparation Tips

Interview preparation tips for other job seekers - Very nice interview
Technical round
Hr round
Apptitude test

Interview Questionnaire 

2 Questions

  • Q1. They asked me mostly about my thesis. And why am i interested in Geotechnical Engg
  • Q2. Starting from modulus of elasticity of soil to liquifaction of soil. It went on like a discussion process
  • Ans. 

    Discussion on soil mechanics starting from modulus of elasticity to liquifaction

    • Modulus of elasticity is a measure of soil stiffness

    • Soil strength is important in determining its ability to withstand loads

    • Liquifaction occurs when soil loses strength and behaves like a liquid

    • Factors affecting soil strength include soil type, moisture content, and stress history

    • Liquifaction can lead to soil failure and damage to structure

  • Answered by AI

Interview Preparation Tips

Round: Interview
Experience: This round went pretty much well and i answered them fairly and easily.

Round: Interview
Experience: This was the round where i felt bit nervous but as i was known well my my subjects i answered them all perfectly.
Tips: Brush up your skills regularly.

General Tips: Have a good sense of your clothing,have confidence on what you speak.
Skills: Technical skills , General Knowledge
College Name: IIT ROORKEE
Motivation: i am a self motivator

Interview Preparation Tips

Round: Technical + HR Interview
Experience: Questions from resume only. I have written I like reading books so they asked me last book I read. And some questions related to it.
Tips: Be confident.

College Name: Birla Vishvakarma Mahavidyalaya (BVM) Engineering College
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Engineering basics strength of materials
Round 2 - Technical 

(1 Question)

  • Q1. Fluid mechanics related

Godrej & Boyce Manufacturing Interview FAQs

How many rounds are there in Godrej & Boyce Manufacturing Engineer Trainee interview?
Godrej & Boyce Manufacturing interview process usually has 2 rounds. The most common rounds in the Godrej & Boyce Manufacturing interview process are Aptitude Test and Technical.

Tell us how to improve this page.

Godrej & Boyce Manufacturing Engineer Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Godrej & Boyce Manufacturing Engineer Trainee Salary
based on 6 salaries
₹1 L/yr - ₹4.8 L/yr
At par with the average Engineer Trainee Salary in India
View more details

Godrej & Boyce Manufacturing Engineer Trainee Reviews and Ratings

based on 5 reviews

3.6/5

Rating in categories

3.0

Skill development

3.5

Work-life balance

3.8

Salary

4.1

Job security

3.2

Company culture

3.2

Promotions

4.0

Work satisfaction

Explore 5 Reviews and Ratings
Assistant Manager
1.3k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
780 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
349 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
229 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
211 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Godrej & Boyce Manufacturing with

Tata Group

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Kirloskar Group

3.9
Compare

Thermax Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview