Upload Button Icon Add office photos

Gestamp

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Gestamp Tool Room Engineer Interview Questions, Process, and Tips

Updated 31 Jul 2017

Gestamp Tool Room Engineer Interview Experiences

1 interview found

I was interviewed before Jul 2016.

Interview Questionnaire 

8 Questions

  • Q1. How is ccorrect thinning and crack in online?
  • Ans. 

    Correct thinning and crack in online can be achieved through proper inspection and repair techniques.

    • Thinning and cracks in online can be corrected by identifying the root cause of the issue.

    • Thinning can be addressed by applying appropriate coatings or welding techniques to restore the thickness of the material.

    • Cracks can be repaired by using techniques like welding, brazing, or applying epoxy resins.

    • Regular inspection...

  • Answered by AI
  • Q2. What is the clearance between punch and die button?
  • Ans. 

    The clearance between punch and die button refers to the gap or space between the punch and the die button in a tooling setup.

    • The clearance is necessary to ensure proper functioning of the tooling system.

    • It allows for the material to flow smoothly and prevents binding or sticking.

    • The clearance can vary depending on the material being worked with and the specific application.

    • It is typically measured in terms of percenta...

  • Answered by AI
  • Q3. How is hardness in die steel?
  • Ans. 

    Hardness in die steel is determined by its composition and heat treatment process.

    • Hardness in die steel is primarily influenced by the amount and type of alloying elements present in the steel.

    • Higher carbon content generally results in increased hardness.

    • Heat treatment processes like quenching and tempering can further enhance the hardness of die steel.

    • Different types of die steels have different hardness levels, such ...

  • Answered by AI
  • Q4. Which different type of arc welding rod using die steel?
  • Ans. 

    Different types of arc welding rods used for die steel.

    • E7018 electrode is commonly used for welding die steel.

    • E312 electrode is used for welding stainless die steel.

    • E309 electrode is used for welding high alloy die steel.

    • E6010 electrode can be used for welding mild steel dies.

  • Answered by AI
  • Q5. What is your working company
  • Ans. 

    I am currently working at XYZ Engineering Company as a Tool Room Engineer.

    • XYZ Engineering Company

    • Tool Room Engineer position

    • Responsibilities include tool maintenance, repair, and calibration

    • Collaborating with production team to ensure tools are functioning properly

  • Answered by AI
  • Q6. Which department
  • Q7. Your take home salary
  • Q8. Your expectations
  • Ans. 

    I expect a challenging role where I can utilize my skills and knowledge to contribute to the success of the company.

    • Opportunity to work on diverse projects

    • Supportive team environment

    • Opportunities for professional growth and development

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Short list for tool maker
Tips: Press tool correction

Round: Technical Interview
Experience: atten this round very easy.
Tips: some correction and development ideas shared.

Round: HR Interview
Experience: I have shared my work experience and department works and developments

Skills: Operating Systems

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all Resume tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Related to old experience with explanations.
  • Q2. Why are you join this group.
  • Q3. How to improve for skill manpower
  • Ans. 

    To improve skill manpower, focus on training programs, mentorship, career development, and recruitment strategies.

    • Implement regular training programs to enhance skills and knowledge

    • Provide mentorship opportunities for junior employees to learn from experienced professionals

    • Offer career development paths and opportunities for advancement within the organization

    • Revise recruitment strategies to attract top talent with the

  • Answered by AI
Round 3 - Technical 

(4 Questions)

  • Q1. OEE calculation
  • Q2. TPM with explanation
  • Ans. 

    TPM stands for Total Productive Maintenance, a proactive approach to maintenance that aims to maximize equipment effectiveness.

    • TPM focuses on preventing equipment breakdowns through regular maintenance and employee involvement.

    • It involves setting up autonomous maintenance teams, conducting planned maintenance activities, and improving overall equipment efficiency.

    • TPM also emphasizes training employees to take ownership...

  • Answered by AI
  • Q3. 7 QC Tools Poke yoke
  • Q4. Kaizen done last group
Round 4 - HR 

(2 Questions)

  • Q1. Salary Expectations
  • Q2. How to join this group
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Nov 2023. There were 4 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. About your introduction.
  • Ans. Good morning sir/ madam. First of all thank you for giving me this opportunities to introduce my self, my name is UTSAV, i am basically from SAMASTIPUR. But currentiIy study in C.I.P.E.T. HAJIPUR . IDID COMPLETED MY INTERMIDIATED IN SCIENCE FROM B.S.E.B PATNA. I belong to nuclear joint family. my strength , i am self motivated, hard working and a discipline person. my short term goal to get a job in a reputed company ...
  • Answered Anonymously
  • Q2. My self UTSAV . from SAMASTIPUR
Round 2 - Aptitude Test 

About any question from tool room

Round 3 - Aptitude Test 

Any question from mold.

Round 4 - Assignment 

Mold design assembly

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is mould, how many type of mould.
  • Ans. 

    A mould is a hollowed-out block that is filled with a liquid or pliable material to create a specific shape or form. There are several types of moulds used in manufacturing processes.

    • Moulds are commonly used in industries such as plastics, ceramics, and metal casting.

    • Types of moulds include injection moulds, compression moulds, blow moulds, and rotational moulds.

    • Each type of mould has its own unique characteristics and...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good for learning, freshers are very much beneficial to learn various types of work.
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. End-to-end process for wiring harness
  • Ans. 

    The end-to-end process for wiring harness involves designing, manufacturing, testing, and installation.

    • Designing the wiring harness based on the electrical requirements and specifications

    • Manufacturing the harness using automated machines or manual labor

    • Testing the harness for electrical continuity, insulation resistance, and other parameters

    • Installing the harness in the vehicle or equipment

    • Ensuring proper routing and s...

  • Answered by AI
  • Q2. What is the FAI process FAI from 1 FAI from 2 and FAI from 3
  • Ans. 

    FAI stands for First Article Inspection, a process to verify the initial production run meets all requirements.

    • FAI from 1 is the initial inspection of the first article produced in a production run

    • FAI from 2 is the inspection of the first article produced after changes have been made to the production process

    • FAI from 3 is the inspection of the first article produced after changes have been made to the design or enginee...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - always be humble in learning.Be confidence when you attending the interview

I applied via Naukri.com and was interviewed in Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Previous experience, Technical Question related your work etc
Round 3 - HR 

(1 Question)

  • Q1. Question related your family background etc

Interview Preparation Tips

Topics to prepare for Samvardhana Motherson Group Senior Engineer interview:
  • According to your work profile
Interview preparation tips for other job seekers - Great work to learn. They follow all the Japanese culture & system

I applied via Naukri.com and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What was your role in previous company?
  • Q2. What are improvement you have done?

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare basics,be confident and wear proper formal cloths.
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Case Study 

What are the projects done by you in your current company

Interview Preparation Tips

Interview preparation tips for other job seekers - Do well
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Spc, msa, iatf , process capability
  • Q2. Manpower handling

Interview Preparation Tips

Topics to prepare for Samvardhana Motherson Group Senior Engineer interview:
  • SPC
  • MSA
  • Iatf
Interview preparation tips for other job seekers - Easy interview process
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. About session and state management
  • Q2. Duplicate row deletion
  • Q3. Sql server joins

Interview Preparation Tips

Interview preparation tips for other job seekers - it was very simple
Contribute & help others!
anonymous
You can choose to be anonymous

Gestamp Interview FAQs

What are the top questions asked in Gestamp Tool Room Engineer interview?

Some of the top questions asked at the Gestamp Tool Room Engineer interview -

  1. Which different type of arc welding rod using die ste...read more
  2. What is the clearance between punch and die butt...read more
  3. how is ccorrect thinning and crack in onli...read more

Recently Viewed

INTERVIEWS

Cyril Amarchand Mangaldas

No Interviews

DESIGNATION

LIST OF COMPANIES

The Hi-tech Robotic Systemz

Overview

INTERVIEWS

anovIP

No Interviews

SALARIES

Johnson Controls

DESIGNATION

INTERVIEWS

Johnson Controls

No Interviews

INTERVIEWS

Johnson Controls

No Interviews

DESIGNATION

SALARIES

Frauscher Sensor Technology

Tell us how to improve this page.

Gestamp Tool Room Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 330 Interviews
UNO Minda Interview Questions
4.0
 • 169 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
DENSO Interview Questions
4.1
 • 73 Interviews
JTEKT Interview Questions
4.2
 • 65 Interviews
Faurecia Interview Questions
3.9
 • 59 Interviews
View all
Gestamp Tool Room Engineer Salary
based on 10 salaries
₹2.5 L/yr - ₹7.7 L/yr
25% more than the average Tool Room Engineer Salary in India
View more details

Gestamp Tool Room Engineer Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

4.9

Work-life balance

4.9

Salary

5.0

Job security

4.9

Company culture

4.9

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Junior Engineer
113 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
69 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
65 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
63 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
57 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Gestamp with

Bharat Forge

3.9
Compare

TVS Sundram Fasteners

3.7
Compare

Rico Auto Industries

3.8
Compare

Samvardhana Motherson Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent