Add office photos
Filter interviews by
Gemsons Precision Engineering Interview Questions, Process, and Tips
Top Gemsons Precision Engineering Interview Questions and Answers
- Q1. What is relief angle and rack angle? What i counter bore?asked in Quaity Control Engineer interview
- Q2. NDT testing process.asked in Assistant Manager interview
- Q3. Offset of machining.asked in CNC Machine Operator interview
Gemsons Precision Engineering Interview Experiences
5 interviews found
Anonymous
Selected
I applied via Naukri.com and was interviewed in Jun 2023. There were 4 interview rounds.
A Paper with MCQ questions related to Machining processes was given to answer
(1 Question)
- Q1. HR will introduce you to the company and your job profile and will ask questions related your current location and expected CTC
(1 Question)
- Q1. My technical round was conducted by the operation head and he asked questions based on what is mention in your resume He will then tell you that you will have to sign a bond of 18 months which is a big sur...
Interview Preparation Tips
Quality Analyst Interview Questions asked at other Companies
Siddalingappa
Basics MCQ for machining process. It's too easy to solve.
(1 Question)
- Q1. Offset of machining.
- Ans.
Offset of machining refers to the adjustment made to the position of the cutting tool to achieve the desired dimensions and surface finish of the workpiece.
Offsets are used to compensate for tool wear, tool deflection, or inaccuracies in the machine setup.
Common types of offsets include tool length offset, tool radius offset, and workpiece offset.
Offsets are typically adjusted in the CNC machine control panel or throug...
CNC Machine Operator Interview Questions asked at other Companies
Selected
I applied via Job Portal and was interviewed in Dec 2022. There were 2 interview rounds.
(4 Questions)
- Q1. NDT testing process.
- Ans.
NDT testing process is a non-destructive method of testing materials without causing damage to the tested object.
NDT testing process involves the use of various techniques such as ultrasonic testing, radiography, magnetic particle testing, and visual inspection.
The process is used to detect flaws or defects in materials such as cracks, voids, and inclusions.
NDT testing is commonly used in industries such as aerospace, ...
- Q2. Magnetic particle testing.
- Q3. Visual inspection testing.
- Q4. Radiography testing NDT.
Interview Preparation Tips
- NDT Inspection
Bus facility available. No value for right condidate.
Job security less.
Assistant Manager Interview Questions asked at other Companies
Selected
I applied via Approached by Company and was interviewed before Dec 2021. There was 1 interview round.
(2 Questions)
- Q1. What is ru outout?what is concentricity?
- Ans.
Ru output is a measure of the surface finish of a part. Concentricity is the measurement of the center point of a feature relative to its axis.
Ru output is a measure of the roughness of a surface, typically measured in microinches or micrometers.
Concentricity is the measurement of how well the center point of a feature aligns with its axis.
For example, in a cylindrical part, concentricity would measure how well the cen...
- Q2. What is relief angle and rack angle? What i counter bore?
- Ans.
Relief angle is the angle between the flank and the perpendicular to the cutting edge. Rack angle is the angle between the tooth face and a plane perpendicular to the cutter axis. Counter bore is a cylindrical flat-bottomed hole that enlarges another hole.
Relief angle is important for reducing friction and heat buildup during cutting operations.
Rack angle is important for determining the shape and size of the teeth on ...
Interview Preparation Tips
Quaity Control Engineer Interview Questions asked at other Companies
Gemsons Precision Engineering interview questions for popular designations
I was interviewed in Aug 2021.
(2 Questions)
- Q1. Tell me about yourself.
- Q2. Production department
Interview Preparation Tips
Production Department Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
I was interviewed in Nov 2024.
(4 Questions)
- Q1. Wind calculation as per IS code
- Ans.
The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.
Determine the design wind speed based on the location and height of the structure.
Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.
Calculate the wind pressure using the formula provided in the IS code.
Consider fa...
- Q2. SFD and BMD of cantilever beam
- Q3. Staad model for fixed pole
- Ans.
A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.
In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.
The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.
The analysis helps in determining the s...
- Q4. Design of Square base plate
- Ans.
Key considerations in designing a square base plate
Ensure the base plate is large enough to support the load without excessive deflection
Select appropriate material and thickness to meet structural requirements
Consider the connection details for attaching the base plate to the structure
Account for any potential corrosion or environmental factors that may affect the base plate
Include provisions for anchor bolts or other...
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Dec 2024. There was 1 interview round.
(2 Questions)
- Q1. Witch type transformer use in elevator?
- Q2. Difference in open loop or close loop
Design Engineer Interview Questions & Answers
Crane Process Flow Technologies India
Vrushabh Chute
posted on 11 Jan 2025
(2 Questions)
- Q1. Questions related to core mechanical engg
- Q2. Product related questions
Cable selection
Panel components mounting
Panel layout?
(2 Questions)
- Q1. Latest working version of Eplan
- Q2. Eplan command
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.
(7 Questions)
- Q1. First angle and third angle symbol
- Ans.
First angle and third angle symbols are used in engineering drawings to indicate the orientation of the views.
First angle projection is commonly used in Europe and Asia, where the top view is placed below the front view.
Third angle projection is commonly used in North America, where the top view is placed above the front view.
The symbol for first angle projection is a triangle with the number 1 inside, while the symbol...
- Q2. Welding symbols
- Q3. Types of gears and bearings
- Ans.
Types of gears include spur, helical, bevel, worm, rack and pinion. Types of bearings include ball, roller, plain, and fluid bearings.
Types of gears: spur, helical, bevel, worm, rack and pinion
Types of bearings: ball, roller, plain, fluid
- Q4. Four Heat treatment process name
- Ans.
Four common heat treatment processes are annealing, quenching, tempering, and normalizing.
Annealing involves heating the material to a specific temperature and then slowly cooling it to relieve internal stresses and increase ductility.
Quenching is a rapid cooling process used to harden materials by forming a martensitic structure.
Tempering is a heat treatment process that involves reheating the quenched material to a s...
- Q5. Welding,brazing and soldering difference between them.
- Ans.
Welding joins two metal pieces by melting them together, brazing joins them with a filler metal at lower temperatures, and soldering joins them with an even lower melting point filler metal.
Welding involves melting the base metals and adding a filler material to create a strong joint, typically at high temperatures.
Brazing uses a filler metal with a melting point above 450°C but below the melting point of the base meta...
- Q6. CSK bolt drawing
- Q7. Tpi and bsp dull form
Gemsons Precision Engineering Interview FAQs
Tell us how to improve this page.
Gemsons Precision Engineering Interviews By Designations
- Gemsons Precision Engineering Assistant Manager Interview Questions
- Gemsons Precision Engineering CNC Machine Operator Interview Questions
- Gemsons Precision Engineering Production Department Interview Questions
- Gemsons Precision Engineering Quaity Control Engineer Interview Questions
- Gemsons Precision Engineering Quality Analyst Interview Questions
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Gemsons Precision Engineering Reviews and Ratings
based on 49 reviews
Rating in categories
|
Quality Engineer
12
salaries
|  ₹2.8 L/yr - ₹5.5 L/yr |
|
QA Engineer
12
salaries
| ₹2.4 L/yr - ₹4.2 L/yr |
|
CNC Machine Operator
10
salaries
| ₹1 L/yr - ₹4 L/yr |
|
Senior Quality Assurance Engineer
6
salaries
| ₹2.5 L/yr - ₹5 L/yr |
|
VMC Machine Operator
6
salaries
| ₹2 L/yr - ₹3 L/yr |
Bharat Forge
Bosch
Tata Technologies
L&T Technology Services
Calculate your in-hand salary
- Home >
- Interviews >
- Gemsons Precision Engineering Interview Questions
