Upload Button Icon Add office photos

Filter interviews by

Gemsons Precision Engineering Quaity Control Engineer Interview Questions and Answers

Updated 14 Dec 2022

Gemsons Precision Engineering Quaity Control Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be honest with your years of experience. All information you share will be verified at the time of joining.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is ru outout?what is concentricity?
  • Ans. 

    Ru output is a measure of the surface finish of a part. Concentricity is the measurement of the center point of a feature relative to its axis.

    • Ru output is a measure of the roughness of a surface, typically measured in microinches or micrometers.

    • Concentricity is the measurement of how well the center point of a feature aligns with its axis.

    • For example, in a cylindrical part, concentricity would measure how well the cen...

  • Answered by AI
  • Q2. What is relief angle and rack angle? What i counter bore?
  • Ans. 

    Relief angle is the angle between the flank and the perpendicular to the cutting edge. Rack angle is the angle between the tooth face and a plane perpendicular to the cutter axis. Counter bore is a cylindrical flat-bottomed hole that enlarges another hole.

    • Relief angle is important for reducing friction and heat buildup during cutting operations.

    • Rack angle is important for determining the shape and size of the teeth on ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Before going for the interview u must have learned gd&t.some basic metrology

Quaity Control Engineer Jobs at Gemsons Precision Engineering

View all

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Sep 2023.

Round 1 - Aptitude Test 

Some basic questions related to mechanical engineering syllabus

Round 2 - Technical 

(1 Question)

  • Q1. Basic questions like difference between two stroke and four stroke engine etc
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Solving questions paper

Round 2 - Assignment 

CAD &Solid work test

Round 3 - HR 

(2 Questions)

  • Q1. Project Handling experience
  • Q2. Salary negotiation
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General discussion of your work history
Round 3 - Technical 

(1 Question)

  • Q1. Stream technical question
Round 4 - Assignment 

General work related assignment

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare of your work related technical question.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is QA and QC
  • Ans. 

    QA stands for Quality Assurance and involves processes to prevent defects, while QC stands for Quality Control and involves processes to identify defects.

    • QA focuses on preventing defects in the product or service being delivered

    • QC focuses on identifying defects in the product or service being delivered

    • QA involves processes such as reviews, audits, and process improvements

    • QC involves processes such as testing, inspectio...

  • Answered by AI
  • Q2. Welding details

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Preparations only , not to try extra

I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Previous company work experience
  • Q2. Plans in next 5 years
  • Ans. 

    I plan to continue developing my technical skills and taking on leadership roles within the company.

    • Pursue advanced technical certifications

    • Lead cross-functional teams on complex projects

    • Mentor junior engineers

    • Explore opportunities for innovation and process improvement

    • Collaborate with senior management to set strategic goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was ok. But the local management is horrible. Don't join expecting MNC standard.Even a startup might be better than this company. It's a family owned business by the manager. Not MNC
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Jan 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. General Questiones
Round 2 - Technical 

(1 Question)

  • Q1. Basics and Intermediate level
Round 3 - One-on-one 

(1 Question)

  • Q1. Behaviour and Logicals

I applied via Company Website and was interviewed before Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. They asked me about IC engine
  • Q2. Alternator function

Interview Preparation Tips

Interview preparation tips for other job seekers - Mostly they asked about IC engine. And alternator. Some time if they looking from electronic side may they ask about AMF Panel.

Interview Questionnaire 

1 Question

  • Q1. General Product knowledge and Mainly market awareness, commercial knowledge must.

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

19 Questions

  • Q1. 1- About the pipe.
  • Q2. 2- About the drawing.
  • Q3. 3- About the material code.
  • Q4. 4- About the direction.
  • Q5. 5- About the flange & Class.
  • Q6. 6- About the pipe schedule.
  • Q7. 7- About the elbow & elbow center.
  • Q8. 8- About the supervision.
  • Q9. 9- About the support.
  • Q10. 10 - About the reducer.
  • Q11. 11- About the template.
  • Q12. 12- About the spool & fabrication.
  • Q13. 13- About the safety.
  • Q14. 14- About the OD & CF of pipe
  • Q15. 15- About the fitting.
  • Q16. 16- About the symbol.
  • Q17. 17- About the gasket.
  • Q18. 18- About the hydro testing.
  • Q19.  etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview is good but salary is not good according to it

Gemsons Precision Engineering Interview FAQs

How many rounds are there in Gemsons Precision Engineering Quaity Control Engineer interview?
Gemsons Precision Engineering interview process usually has 2 rounds. The most common rounds in the Gemsons Precision Engineering interview process are Resume Shortlist and Technical.
How to prepare for Gemsons Precision Engineering Quaity Control Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Gemsons Precision Engineering. The most common topics and skills that interviewers at Gemsons Precision Engineering expect are Quality Assurance and Quality Control Management.
What are the top questions asked in Gemsons Precision Engineering Quaity Control Engineer interview?

Some of the top questions asked at the Gemsons Precision Engineering Quaity Control Engineer interview -

  1. What is relief angle and rack angle? What i counter bo...read more
  2. What is ru outout?what is concentrici...read more

Tell us how to improve this page.

Gemsons Precision Engineering Quaity Control Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

PMT Machines Interview Questions
3.3
 • 19 Interviews
Trelleborg Interview Questions
4.0
 • 18 Interviews
MITA Interview Questions
3.7
 • 14 Interviews
Garuda Power Interview Questions
3.4
 • 12 Interviews
D.B ENGINEERING Interview Questions
4.3
 • 11 Interviews
View all

Gemsons Precision Engineering Quaity Control Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

5.0

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Quality Engineer
12 salaries
unlock blur

₹2.8 L/yr - ₹5.5 L/yr

QA Engineer
12 salaries
unlock blur

₹2.4 L/yr - ₹4.2 L/yr

CNC Machine Operator
10 salaries
unlock blur

₹1 L/yr - ₹4 L/yr

Senior Quality Assurance Engineer
6 salaries
unlock blur

₹2.5 L/yr - ₹5 L/yr

VMC Machine Operator
6 salaries
unlock blur

₹2 L/yr - ₹3 L/yr

Explore more salaries
Compare Gemsons Precision Engineering with

Trelleborg

4.0
Compare

Case New-Holland Construction Equipment India

4.0
Compare

MITA

3.7
Compare

PMT Machines

3.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview