Upload Button Icon Add office photos

Fukoku

Compare button icon Compare button icon Compare

Filter interviews by

Fukoku Graduate Engineer Trainee (Get) Interview Questions and Answers for Freshers

Updated 28 Jun 2021

Fukoku Graduate Engineer Trainee (Get) Interview Experiences for Freshers

1 interview found

I applied via Walk-in and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Which questions ask in interview
  • Q2. Tell about yourself, your field, your project and technical or non technical answers

Interview Preparation Tips

Interview preparation tips for other job seekers - It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

Interview questions from similar companies

Interview Preparation Tips

Round: Test
Experience: The test is based on quant and general aptitude. Brushing up quant fundaes for CAT is helpful for preparation. The test is conducted after initial resume shortlisting.

Round: HR Interview
Experience: There is just one round of interview for twenty minutes. The interview is based on general HR questions. Be prepared for answering typical HR questions. It is a leadership profile. The company sponsors post-graduation in South Korea followed by a global assignment. They are specifically looking for people with leadership qualities and the ability to take initiatives. Good communication skills are a must.

General Tips: Be prepared for a four year bond after post-graduation
Skills: Quants , Communication, General Knowledge, Leadership
College Name: IIT MADRAS

Interview Preparation Tips

Round: Test
Experience: Basic verbal and logical reasoning questions were asked and provided time is sufficient enough to complete.
Duration: 30 minutes
Total Questions: 30

Round: Test
Experience: This test is to measure individuals metal capabilities and behavior styles. Be frank in answering them.
Tips: Go for the answer that came across your mind first. Never think deeply for these kind of tests.
Duration: 30 minutes
Total Questions: 50

Round: Group Discussion
Experience: By this time I was familiar with how to form a good group discussions. So, I waited for every one to come up with their points first and then channelized them to particular direction This made none of them to loose track. I used to back their points if others are moving away from the topic. Finally I concluded and everyone agreed upon it. It was peaceful discussion. After that I was the first one to get shortlisted for PI.
Tips: Never move away from the topic. Always try to channelize your points for a better understanding and for a peaceful discussion.
Duration: 20 minutes

Round: Technical + Hr Interview
Experience: It was one of my best Interviews so far during our placement season. Both HR and Technical guy made me comfortable. It started with some basic HR questions like "Tell me about yourself?" followed by my internship projects and automobile industry questions like SI engines, Otto cycles, emission norms in India, power train, suspension. While I was answering my technical questions, HR was observing the way I was answering and depending on them, HR started asking some situation based questions. As I was fully prepared for HR questions I gave them spontaneously and frankly. Both HR and Technical guy were really impressed. Interview went on for 1:30 hrs and then I was given a chance to ask questions. Which I utilized very much, by asking them various company related questions. I was the only one to get selected from IIT G.
Tips: Be frank. Never answer a question if you know only half of it, it does no good. Be confident.

Skills: Behavioural Skills, Technical Skill And Speaking Skill, Leadership Skills, Confidence
College Name: IIT Guwahati
Motivation: GM is an American multinational corporation headquartered at Detroit. Rich 107 years of history, with a market share of 19%. It is one of the world's 3rd largest automaker with four major brands: Chevrolet, Cadillac, GMC and Buick. A dream company for any mechanical engineer.

Interview Questionnaire 

16 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a highly motivated and experienced professional with a strong background in the field of GET.

    • I have a Bachelor's degree in GET from XYZ University.

    • I have worked for 5 years as a GET specialist at ABC Company.

    • I have successfully implemented several GET projects, resulting in cost savings and improved efficiency.

    • I am proficient in various GET tools and technologies, such as XYZ software and ABC programming language.

  • Answered by AI
  • Q2. Asked from tell me about yourself (self driven interview)?
  • Q3. What & why of image processing?
  • Ans. 

    Image processing is the manipulation and analysis of images using various algorithms and techniques.

    • Image processing involves enhancing, restoring, and analyzing digital images.

    • It is used in various fields like medical imaging, surveillance, remote sensing, and computer vision.

    • Image processing techniques include filtering, segmentation, feature extraction, and pattern recognition.

    • Examples of image processing applicatio...

  • Answered by AI
  • Q4. How will you separate audio from video signals ?
  • Ans. 

    Separating audio from video signals involves extracting the audio component from the combined audio-video signal.

    • Use audio extraction software or hardware to separate audio from video signals.

    • Apply signal processing techniques to isolate the audio component.

    • Utilize audio editing software to extract and save the audio separately.

    • Examples: using video editing software like Adobe Premiere Pro, using audio extraction tools

  • Answered by AI
  • Q5. Explain working of watsapp?(Networking)
  • Ans. 

    WhatsApp is a messaging app that uses the internet to send messages, make voice and video calls, and share media.

    • WhatsApp uses end-to-end encryption to ensure the privacy and security of messages.

    • It requires an internet connection to function and can be used on smartphones and computers.

    • Users can create groups, send multimedia files, and make voice and video calls.

    • WhatsApp uses a server-client architecture to handle me...

  • Answered by AI
  • Q6. What was your project about?How it works?
  • Ans. 

    My project was about developing a smart home automation system.

    • The system uses sensors and actuators to monitor and control various aspects of the home.

    • For example, it can detect motion and adjust the lighting accordingly.

    • It can also monitor temperature and adjust the thermostat to maintain a comfortable environment.

    • The system can be controlled remotely through a mobile app or voice commands.

    • It provides convenience, en...

  • Answered by AI
  • Q7. What are feedback?(oscillators & control theory)
  • Ans. 

    Feedback is a process in which a portion of the output of a system is fed back to the input, influencing the system's behavior.

    • Feedback is a fundamental concept in control theory and oscillators.

    • It involves taking a portion of the output signal and feeding it back to the input.

    • Feedback can be positive or negative, depending on whether it reinforces or opposes the input signal.

    • Positive feedback can lead to instability o...

  • Answered by AI
  • Q8. What is the difference between Interference & Distortion? Methods to eliminate both?
  • Ans. 

    Interference is the addition of unwanted signals, while distortion is the alteration of the original signal.

    • Interference is caused by external signals or noise that disrupt the desired signal.

    • Distortion occurs when the original signal is altered or modified.

    • Methods to eliminate interference include shielding, filtering, and using balanced connections.

    • Distortion can be reduced by using high-quality components, equalizat

  • Answered by AI
  • Q9. What is difference between diode, diac , triac,scr ?
  • Ans. 

    Diode, diac, triac, and SCR are all electronic components used in electrical circuits.

    • Diode is a two-terminal device that allows current to flow in one direction.

    • DIAC (Diode for Alternating Current) is a two-terminal device that conducts current in both directions when triggered.

    • TRIAC (Triode for Alternating Current) is a three-terminal device that conducts current in both directions when triggered.

    • SCR (Silicon Control...

  • Answered by AI
  • Q10. How does a camera work ?
  • Ans. 

    A camera works by capturing light through a lens and converting it into an image using a photosensitive material or digital sensor.

    • Light enters the camera through the lens

    • The lens focuses the light onto a photosensitive material or digital sensor

    • The photosensitive material or sensor converts the light into an electrical signal

    • The electrical signal is processed and stored as an image

    • Examples: film cameras use photosensi

  • Answered by AI
  • Q11. What is amplitude modulation / Frequency Modulation?
  • Ans. 

    Amplitude modulation (AM) and frequency modulation (FM) are techniques used in telecommunications to transmit information.

    • Amplitude modulation (AM) is a modulation technique where the amplitude of the carrier signal is varied in proportion to the waveform being transmitted.

    • Frequency modulation (FM) is a modulation technique where the frequency of the carrier signal is varied in proportion to the waveform being transmit...

  • Answered by AI
  • Q12. Questions on frequency spectrum ?
  • Q13. Are you ready for relocation?
  • Ans. 

    Yes, I am ready for relocation.

    • I am open to moving to a new location for the job.

    • I have researched the potential relocation location and am excited about the opportunities it offers.

    • I am prepared to make the necessary arrangements and adjustments to relocate smoothly.

    • I have previous experience of relocating for work and understand the challenges involved.

  • Answered by AI
  • Q14. What do you do in free time?
  • Ans. 

    In my free time, I enjoy reading books, playing sports, and spending time with my family and friends.

    • Reading books

    • Playing sports

    • Spending time with family and friends

  • Answered by AI
  • Q15. Why do you not like IT field?
  • Ans. 

    I do not dislike the IT field.

    • I actually enjoy working in the IT field.

    • I find the challenges and problem-solving aspects of IT fascinating.

    • I appreciate the continuous learning opportunities in the IT field.

    • I have had positive experiences working with technology and IT teams in the past.

  • Answered by AI
  • Q16. Are you ready to work on shop floor?
  • Ans. 

    Yes, I am ready to work on the shop floor.

    • I have experience working on the shop floor in my previous job.

    • I am physically fit and capable of handling the demands of the shop floor.

    • I am comfortable with the fast-paced environment and can adapt quickly to changes.

    • I understand the importance of following safety protocols and can prioritize safety in my work.

    • I am a team player and can collaborate effectively with colleagues

  • Answered by AI

Interview Preparation Tips

Round: Group Discussion
Experience: It initially became fish market but later on as people finished points (obviously they didn't allow me to speak) I came out with points that entire group was amazed to see . That's the point in GD Where you feel you will be definitely selected.
Tips: 1.   Always in a GD think the points that you believe large masses will not be able to think.Consider it as flock of sheeps vieing for the a debate with similar points while you are having some really cool points that an HR always wants to see.2. Speak less but speak more in terms of facts , Figures , Analysis . Give Others a Chance
Duration: 20 minutes

Round: Group Activity
Experience: In Case Discussion we were presented a case and we were told to order 20 different things according to the importance in carries in the case.This was a less fish market but people in all were heavily bashing as there points were not being taken . There were fights for number 1 position as well :P
Tips: Same as that in a GD  . In CD a Recruiter sees the reasoning behind why you want to place some things first than other things later . ALways reason out why you believve your ordering not just give the numbering .

Round: Test
Duration: 4 minutes
Total Questions: 20

Skill Tips: Watch Newshour Debates (yes you heard it right) or watch CNN IBN Talk Shows . Even though it is a menace you get few facts that makes a lot to carry with you
Skills: How you speak, What you speak, , Analysis
College Name: Sardar Vallabhbhai National Institute of Technology

Skills evaluated in this interview

I appeared for an interview in Nov 2016.

Interview Preparation Tips

Round: Test
Experience: You will be asked to answer 40 mcqs in 20 mins . No technical or gk questions were asked . All are moderate apti questions only.
Tips: Practice regularly , time is the key factor to win so try to solve as many questions as possible in minimal time
Duration: 20 minutes
Total Questions: 40

Round: Group Discussion
Experience: Selected candidates in written test are formed into groups for group discussion . In this a topic will be presented by the panel and you are asked to discuss the topic ( topic can be any general topoc ). After that again a situation will be presented to you, in that you need to take a side and should explain your views supporting them.
Tips: Always try to initiate the discussion at first place . If you dont have a proper knowledge about the topic listen to the person who initiated it and be the second person to talk.
Duration: 10 minutes

Round: Technical + HR Interview
Experience: My interview starts with very common question that is " tell me about yourself ". After that panel asked me many questions on my internship . Afterwards they asked me about my favourite subjects . Panel asked me more questions from automobile engineering and for my other competetors they asked questions from manifacturing technology .
Tips: Always be prepared with a good knowledge on atleast 3 subjects and those 3 must be related to the job your applying for. Always give your answer firlmy . Be thorough with your basics . Gain good knowledge while doing your internship. It will helps a lot .

College Name: GITAM University, Visakhapatnam

Interview Preparation Tips

Round: Resume Shortlist
Tips: Prepare a well versed resume .It should be short and to the point.Manage every thing in an organised manner.

Round: Group Discussion
Tips: Speak confidently as much as u can,but make sure u speak relevent to the topic.Voice should be clear. Make a brief outline of the points u are going to speak .
Duration: 30 minutes

Round: Test
Experience: it was a simple sphychological test(non elimination round)
Duration: 15 minutes

Round: HR Interview
Experience: It was of 30 min duration wherein i was asked about my personal life , technical background and academics.
Tips: Prepare HR questions before the interview. Whatever u speak speak confidently.They just wants to know your confidence level and speaking skills.
Make sure you speak of the words you are sure of because the next question would come from their itself.

Skills: Confidence, speaking skills, leadership qualities, sincerity , communication skills, discipline
College Name: NIT BHOPAL

I applied via Company Website and was interviewed in May 2021. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Diploma in mechanical engineering
  • Q2. BE mechanical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - check my talent and my knowledge
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

The test conducted by SHL included sections on technical skills, psychometrics, and data interpretation (interactive G3+).

Round 2 - Group Discussion 

Most of the topics provided were related to electric vehicles and luxury cars.

Round 3 - One-on-one 

(1 Question)

  • Q1. What manufacturing process do you prefer discussing, and can you elaborate on its key aspects for two minutes?
  • Ans. 

    I prefer discussing the injection molding process.

    • Injection molding is a manufacturing process used to produce parts by injecting material into a mold.

    • Key aspects include material selection, mold design, injection pressure, cooling time, and part ejection.

    • Examples of products made using injection molding include plastic bottles, automotive parts, and medical devices.

  • Answered by AI
Round 1 - Aptitude Test 

All basic quantitative aptitude

Round 2 - Group Discussion 

General topics. They test your boldness.

Round 3 - Technical 

(2 Questions)

  • Q1. About engines and their working procedures
  • Q2. Power Cycles basics, Engine parts and their functions
Round 4 - HR 

(1 Question)

  • Q1. General basic communication skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Just focus on basics from which domain you belong to.

I applied via Naukri.com and was interviewed in Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

120 min

Round 3 - Group Discussion 

Ev

Round 4 - Technical 

(2 Questions)

  • Q1. Stress starin engine car truck
  • Q2. Tell me about your self

Interview Preparation Tips

Interview preparation tips for other job seekers - be yourself a b c d e f g hi j k l m k k k k k k

Tell us how to improve this page.

Fukoku Graduate Engineer Trainee (Get) Salary
based on 22 salaries
₹1.5 L/yr - ₹3 L/yr
42% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Fukoku Graduate Engineer Trainee (Get) Reviews and Ratings

based on 9 reviews

2.9/5

Rating in categories

2.2

Skill development

2.5

Work-life balance

1.9

Salary

2.2

Job security

2.4

Company culture

1.8

Promotions

2.2

Work satisfaction

Explore 9 Reviews and Ratings
Quality Engineer
29 salaries
unlock blur

₹1.5 L/yr - ₹3 L/yr

Trainee
28 salaries
unlock blur

₹1.2 L/yr - ₹3.5 L/yr

Production Engineer
28 salaries
unlock blur

₹1.3 L/yr - ₹4 L/yr

Graduate Engineer Trainee (Get)
22 salaries
unlock blur

₹1.5 L/yr - ₹3 L/yr

Assistant Manager
19 salaries
unlock blur

₹4.8 L/yr - ₹6.7 L/yr

Explore more salaries
Compare Fukoku with

Hyundai Motor India Limited

4.3
Compare

Royal Enfield

4.2
Compare

Ford Motor

4.3
Compare

Yamaha Motor

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview