i
Fluence
Filter interviews by
I applied via LinkedIn and was interviewed in Oct 2024. There were 2 interview rounds.
Top trending discussions
posted on 11 Nov 2024
posted on 25 Mar 2022
I applied via LinkedIn and was interviewed before Mar 2021. There were 2 interview rounds.
posted on 11 Jun 2024
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
Consists of two coils of wire, known as primary and secondary coils
Primary coil receives electrical energy and creates a magnetic field
Magnetic field induces a voltage in the secondary coil, transferring energy
Used in power distribution, voltage regulation, and electrical isolation
I applied via Naukri.com and was interviewed before Jun 2023. There were 3 interview rounds.
The gearbox oil grade is typically specified by the manufacturer based on the requirements of the gearbox.
Gearbox oil grade is determined by the viscosity and additives needed for proper lubrication.
Common gearbox oil grades include SAE 80, SAE 90, and SAE 140.
Consult the manufacturer's specifications or maintenance manual for the recommended gearbox oil grade.
Pitch convertor system,
posted on 13 Oct 2022
WTG stands for Wind Turbine Generator. Yaw drive system is responsible for orienting the turbine blades into the wind.
WTG converts wind energy into electrical energy
Yaw drive system rotates the nacelle to face the wind
Yaw drive system consists of yaw motor, yaw brake, and yaw bearing
Yaw motor receives signals from the controller to rotate the nacelle
Yaw brake holds the nacelle in position during maintenance or high win
I applied via Approached by Company and was interviewed before Oct 2022. There were 4 interview rounds.
Written exam with technical and non technical
posted on 8 Apr 2022
I applied via Naukri.com and was interviewed in Oct 2021. There were 2 interview rounds.
posted on 2 Nov 2020
Motor testing involves various methods to check the performance and health of an electric motor.
Check the motor windings for continuity and resistance
Measure the voltage and current to determine power consumption
Inspect the bearings and lubrication for wear and tear
Perform a load test to evaluate the motor's ability to handle its rated load
Use specialized equipment like megohmmeters and oscilloscopes for more detailed
based on 1 interview
Interview experience
Talent Acquisition Partner
6
salaries
| ₹8.5 L/yr - ₹13 L/yr |
Project Manager
6
salaries
| ₹26 L/yr - ₹32 L/yr |
Data Scientist
5
salaries
| ₹10.9 L/yr - ₹21.9 L/yr |
Data Analyst
5
salaries
| ₹8 L/yr - ₹15.8 L/yr |
Senior Control Engineer
4
salaries
| ₹34.3 L/yr - ₹42.9 L/yr |
Thermax Limited
Kirloskar Brothers
Wipro Water
Ion Exchange India