Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Ess Kay Fabrication Quality Engineer Interview Questions and Answers

Updated 14 Jan 2025

Ess Kay Fabrication Quality Engineer Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

They are as a friendly asked questions what you did past service as before organization.

Round 2 - Technical 

(1 Question)

  • Q1. Asked simple technical questions, related to your experience s .

Interview Preparation Tips

Interview preparation tips for other job seekers - You are needed to prepare according to your role and while interview time ask comfortable salary Expectations keep it in your mind , from beginning you should keep high expectations of salary benefits
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2022. There were 2 interview rounds.

Round 1 - Devbrat Singh  

(2 Questions)

  • Q1. Copper Id check
  • Q2. Copper thikness
Round 2 - Technical 

(3 Questions)

  • Q1. Vernior liscount
  • Q2. What is copper tolerance
  • Ans. 

    Copper tolerance refers to the ability of a material to withstand exposure to copper without degrading.

    • Copper tolerance is important in industries where copper is commonly used, such as electronics and plumbing.

    • Materials with high copper tolerance are less likely to corrode or degrade when in contact with copper.

    • Testing for copper tolerance involves exposing the material to copper and monitoring any changes in its prop...

  • Answered by AI
  • Q3. 12 mm tube thikness check

Interview Preparation Tips

Interview preparation tips for other job seekers - HR

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
asked in MM AUTO
Q4. what is IATF audit , cause of IATF , relationship between for IAT ... read more
Q5. What is the Physical & Chemical test of Steel Reinforcement?

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is quality
  • Ans. 

    Quality is the measure of excellence or superiority of a product or service.

    • Quality is meeting or exceeding customer expectations.

    • It involves consistency, reliability, and conformance to requirements.

    • Quality can be measured through metrics such as defect rates, customer satisfaction, and on-time delivery.

    • Continuous improvement is essential for maintaining and enhancing quality.

    • Examples of quality include a durable smar...

  • Answered by AI
  • Q2. Gd&t

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank
lage raho
kam karte raho
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What types of relays are used in industries?
  • Ans. 

    Different types of relays used in industries include electromagnetic relays, solid state relays, thermal relays, and overload relays.

    • Electromagnetic relays use electromagnets to operate the contacts.

    • Solid state relays use semiconductor devices to switch the contacts.

    • Thermal relays operate based on the heat generated by the current flowing through them.

    • Overload relays protect motors from overheating by monitoring the cu

  • Answered by AI
  • Q2. What are the protection that are used in transformer?
  • Ans. 

    Various protections used in transformers include overcurrent protection, overvoltage protection, differential protection, and temperature protection.

    • Overcurrent protection: Protects against excessive current flow through the transformer.

    • Overvoltage protection: Safeguards the transformer from voltage spikes or surges.

    • Differential protection: Monitors the difference in current entering and leaving the transformer to dete...

  • Answered by AI
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. All about your previous
  • Q2. Expected Salary

Interview Preparation Tips

Interview preparation tips for other job seekers - More Primery Testing
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the properties of steel and cement. Why steel and cement is used in concrete
  • Ans. 

    Steel is strong, durable, and flexible while cement is a binding material that hardens when mixed with water. They are used in concrete for their complementary properties.

    • Steel is strong and can withstand heavy loads, making it ideal for reinforcing concrete structures.

    • Steel is also flexible, allowing it to bend without breaking under stress.

    • Cement is a binding material that hardens and sets when mixed with water, prov...

  • Answered by AI
  • Q2. What are the types of tests conducted on concrete
  • Ans. 

    Types of tests conducted on concrete include compressive strength test, slump test, and water permeability test.

    • Compressive strength test measures the ability of concrete to withstand loads

    • Slump test measures the consistency and workability of concrete

    • Water permeability test evaluates the durability of concrete against water penetration

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well with basics

I applied via Referral and was interviewed in Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. In technical round they gave me a plan and asked to take quantity of Rcc masonry and plastering

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared and while filling up the first form be extra careful
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Concrete grade, cement testing
Round 3 - HR 

(1 Question)

  • Q1. Salary discussions

I applied via Walk-in and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. What is data structure?
  • Ans. 

    Data structure is a way of organizing and storing data in a computer so that it can be accessed and used efficiently.

    • Data structures are used to manage large amounts of data efficiently.

    • They provide a way to organize data in a way that makes it easy to access and manipulate.

    • Examples of data structures include arrays, linked lists, stacks, queues, trees, and graphs.

  • Answered by AI
Round 3 - Coding Test 

Explain logic of stack

Interview Preparation Tips

Interview preparation tips for other job seekers - Its good place to start your career

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Not Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Execution in Structure
  • Ans. 

    Execution in structure refers to the ability to effectively implement plans and strategies within an organized framework.

    • Understanding the overall goals and objectives of the organization

    • Developing detailed action plans to achieve those goals

    • Assigning tasks and responsibilities to team members

    • Monitoring progress and making adjustments as needed

    • Ensuring that resources are allocated efficiently

    • Communicating effectively w...

  • Answered by AI
  • Q2. High rise buildings

Skills evaluated in this interview

Contribute & help others!
anonymous
You can choose to be anonymous

Ess Kay Fabrication Interview FAQs

How many rounds are there in Ess Kay Fabrication Quality Engineer interview?
Ess Kay Fabrication interview process usually has 2 rounds. The most common rounds in the Ess Kay Fabrication interview process are Technical and Group Discussion.
How to prepare for Ess Kay Fabrication Quality Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Ess Kay Fabrication. The most common topics and skills that interviewers at Ess Kay Fabrication expect are 7Qc, IQC, PPAP, Quality and Quality Audit.
What are the top questions asked in Ess Kay Fabrication Quality Engineer interview?

Some of the top questions asked at the Ess Kay Fabrication Quality Engineer interview -

  1. What is copper tolera...read more
  2. Asked simple technical questions, related to your experience ...read more
  3. 12 mm tube thikness ch...read more

Recently Viewed

SALARIES

OneBanc Technologies

INTERVIEWS

OneBanc Technologies

No Interviews

INTERVIEWS

Grazitti Interactive

No Interviews

SALARIES

WebKorps Solutions

INTERVIEWS

Grazitti Interactive

No Interviews

SALARIES

WebKorps Solutions

INTERVIEWS

Grazitti Interactive

No Interviews

INTERVIEWS

BSH Home Appliances Group

No Interviews

INTERVIEWS

OneBanc Technologies

No Interviews

INTERVIEWS

Grazitti Interactive

10 top interview questions

Tell us how to improve this page.

Ess Kay Fabrication Quality Engineer Interview Process

based on 4 interviews

Interview experience

2.3
  
Poor
View more
Ess Kay Fabrication Quality Engineer Salary
based on 29 salaries
₹2 L/yr - ₹3.5 L/yr
28% less than the average Quality Engineer Salary in India
View more details

Ess Kay Fabrication Quality Engineer Reviews and Ratings

based on 12 reviews

4.2/5

Rating in categories

4.0

Skill development

3.9

Work-life balance

3.7

Salary

4.0

Job security

3.7

Company culture

3.9

Promotions

3.8

Work satisfaction

Explore 12 Reviews and Ratings
Quality Engineer
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

QA Engineer
14 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Ess Kay Fabrication with

Millennium Engineers & Contractors

4.1
Compare

Karam Industries

4.1
Compare

S V S Projects India

3.5
Compare

MaRS Planning & Engineering Services

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview