Filter interviews by
I applied via Approached by Company and was interviewed before Jan 2023. There was 1 interview round.
I applied via Company Website and was interviewed before Apr 2021. There were 7 interview rounds.
Accident, incident
Any hazardous
Any near miss
HIRA
A safety policy outlines an organization's commitment to maintaining a safe work environment and preventing accidents.
Defines safety objectives and responsibilities for all employees.
Establishes procedures for reporting hazards and incidents.
Includes training requirements for staff on safety practices.
Outlines emergency response plans, such as evacuation procedures.
Regularly reviewed and updated to reflect changes in r
Safety is the condition of being protected from harm or danger, ensuring well-being in various environments.
Safety involves identifying hazards and implementing measures to mitigate risks.
Examples include using personal protective equipment (PPE) in construction sites.
Safety protocols are essential in workplaces to prevent accidents and injuries.
Regular safety training helps employees understand and follow safety guide
Safety is the practice of preventing accidents, injuries, and harm to people, property, and the environment.
Safety involves identifying and assessing potential hazards and implementing measures to control or eliminate them.
It includes promoting awareness and education about safety procedures and protocols.
Safety also involves enforcing regulations and standards to ensure compliance.
Examples of safety measures include w...
A hazard is a potential source of harm or danger that can cause injury, illness, or damage to property.
A hazard can be a physical, chemical, biological, or ergonomic factor that has the potential to cause harm.
Examples of hazards include slippery floors, toxic chemicals, infectious diseases, and repetitive motion injuries.
Hazards can be present in various environments such as workplaces, homes, and public spaces.
Identi...
Fire is a chemical reaction that releases heat, light, and various gases.
Fire is a rapid oxidation process that occurs when fuel, heat, and oxygen are present.
It can be classified into different types based on the fuel source, such as Class A, B, C, D, and K fires.
Fire can cause property damage, injuries, and fatalities if not controlled properly.
Prevention measures include proper storage of flammable materials, regula...
I applied via Job Fair and was interviewed in Jun 2024. There were 2 interview rounds.
Work at height hazards include falls, falling objects, unstable surfaces, and improper use of equipment.
Ensure proper training and use of fall protection equipment
Inspect equipment regularly for wear and tear
Secure tools and materials to prevent falling objects
Avoid working on unstable surfaces or in adverse weather conditions
Work at height of 1.8 meters is considered a significant risk level for falls in the workplace.
Work at height of 1.8 meters is a common threshold for implementing fall protection measures.
At this height, the risk of serious injury or fatality from a fall increases significantly.
Regulations and standards often specify 1.8 meters as the height at which fall protection is required.
Factors such as surface conditions, tasks...
Work at height hazards include falls, falling objects, unstable surfaces. Precautions include proper training, use of fall protection equipment, regular inspections.
Identify potential hazards before starting work at height
Ensure workers are properly trained on safe work practices
Use appropriate fall protection equipment such as harnesses, guardrails, and safety nets
Regularly inspect equipment and work areas for any def...
Lifting hazard refers to the risk of injury or strain when lifting heavy objects or lifting improperly.
Lifting heavy objects without proper technique can lead to back injuries
Repetitive lifting without breaks can cause muscle strain
Not using proper lifting equipment can increase the risk of accidents
Improperly lifting objects that are too heavy for one person to handle
Crane hazard refers to the potential dangers associated with the operation of cranes on a worksite.
Crane collapse due to overloading or improper setup
Striking nearby objects or workers
Electrocution from contact with power lines
Falling objects from the crane
Inadequate training or supervision of crane operators
I appeared for an interview in Jan 2025.
HIRA stands for Hazard Identification and Risk Assessment. It is a systematic process used to identify potential hazards and analyze the associated risks in a workplace.
HIRA involves identifying hazards that could cause harm, assessing the risks associated with those hazards, and implementing control measures to mitigate the risks.
It helps in creating a safer work environment by proactively addressing potential risks b...
UA/UC stands for Unsafe Acts/Unsafe Conditions, which are factors that contribute to accidents in the workplace.
UA refers to actions taken by individuals that are unsafe, such as not wearing proper protective equipment.
UC refers to conditions in the workplace that are unsafe, such as faulty equipment or inadequate lighting.
Identifying and addressing UA/UC is crucial in preventing accidents and promoting a safe work env
JSA stands for Job Safety Analysis, a process of identifying potential hazards in a job task. LOTO system stands for Lockout/Tagout, a safety procedure to ensure dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.
JSA involves breaking down a job task into steps, identifying potential hazards at each step, and implementing controls to mitigate the r...
Material handling refers to the movement, control, and protection of materials throughout the manufacturing, warehousing, distribution, consumption, and disposal processes.
Material handling involves the movement of raw materials, work in progress, and finished goods within a facility or between different locations.
There are four main types of material handling: manual, semi-automated, automated, and mechanized.
Examples...
I applied via Job Portal
I applied via Recruitment Consulltant and was interviewed in Nov 2024. There were 4 interview rounds.
Morning TBT conducted about daily basis at site Monthly inspection Full body harness Power tools Store inspection Fire extinguisher 🧯 RCCB inspection
Safe height work involves proper training, equipment, and procedures to prevent falls and injuries.
Ensure workers are trained in proper safety procedures for working at heights
Use appropriate fall protection equipment such as harnesses, guardrails, and safety nets
Regularly inspect equipment for wear and tear to ensure it is in good working condition
Implement a buddy system or have a rescue plan in place in case of emer...
Group with work,paper work site visit etc.
Awrness to all works height work Safe work platform inspection with HSSE team and provide green tag
I appeared for an interview in Jan 2025.
I am a safety officer, I have 2 years of experience, currently I am working in Hyundai construction equipment Pune.
I have done fire industrial safety management course from National Technical Institute in Jamshedpur and have completed my 12th, basic courses ADCA Excel MS office MS PowerPoint etc.
It is a construction line.
Construction line involves building structures like houses, roads, bridges, etc.
Industrial line typically refers to manufacturing processes in factories.
Examples of construction line companies: Bechtel, Fluor Corporation
Examples of industrial line companies: General Electric, Toyota
Safety assignments can involve identifying hazards, assessing risks, and developing safety procedures.
Identifying hazards Identify potential hazards, Decide who might be harmed and how, and Evaluate the risks.
based on 3 interviews
Interview experience
based on 2 reviews
Rating in categories
Assistant Manager
25
salaries
| ₹4 L/yr - ₹8.4 L/yr |
Manager
19
salaries
| ₹5.4 L/yr - ₹13 L/yr |
Civil Engineer
14
salaries
| ₹1.8 L/yr - ₹4.9 L/yr |
Additional General Manager
13
salaries
| ₹13.1 L/yr - ₹30 L/yr |
Assistant Manager Civil
10
salaries
| ₹4.1 L/yr - ₹9.6 L/yr |
L&T Construction
Simplex Infrastructures
AECOM
L&T Energy Hydrocarbon