Upload Button Icon Add office photos

Filter interviews by

Electrical Research & Development Association Government Apprentice Trainee Interview Questions and Answers

Updated 19 Apr 2022

Electrical Research & Development Association Government Apprentice Trainee Interview Experiences

1 interview found

I applied via Company Website and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. How much voltage between two phase wiring?
  • Ans. 

    The voltage between two phase wiring depends on the specific electrical system and can vary.

    • The voltage between two phase wiring can be 220 volts in residential systems.

    • In industrial systems, the voltage can be higher, such as 415 volts.

    • Different countries may have different standard voltages for phase wiring.

    • It is important to consult electrical codes and regulations for accurate voltage information.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Electrical Research & Development Association Government Apprentice Trainee interview:
  • Electricals
  • Maintenance
Interview preparation tips for other job seekers - My answer the question is right. then the HOD says ! Ok I'll call you later

Interview questions from similar companies

I applied via Referral and was interviewed in Dec 2021. There was 1 interview round.

Round 1 - HR 

(8 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. Where do you see yourself in 5 years?
  • Q3. Why should we hire you?
  • Q4. What is your family background?
  • Q5. What are your salary expectations?
  • Q6. Share details of your previous job.
  • Q7. Why are you looking for a change?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview and environmental section was very nice.

Interview Questionnaire 

2 Questions

  • Q1. In the Technical Interview, the Interviewer asked me about my projects in Power Electronics and my experience in the previous organization. Questions related to Power Electronics basics and PCB Design alon...
  • Q2. In this round, I was asked to tell me about myself, family, experience in previous organization, job role and why work with us and expectations from the company. Also the HR will briefly tell you about the...

Interview Preparation Tips

Round: Test
Experience: Aptitude Test consisting of Verbal, Reasoning and Logic questions along with some Technical Questions which requires a good preparation.
Study well for the test to get to the next round.

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Group Discussion 

Regarding electrical project related discussion

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain working of ac-dc converter
  • Ans. 

    AC-DC converter converts alternating current (AC) to direct current (DC) for various applications.

    • AC voltage is converted to DC voltage using rectifiers

    • Rectifiers can be half-wave, full-wave, or bridge rectifiers

    • Filtering is done to smooth out the output voltage

    • Examples include power supplies for electronic devices and battery chargers

  • Answered by AI
  • Q2. PWM techniques, M. Tech project,
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Process knowledge on Electroplating Process from start to end
Round 2 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared on your strong areas and be confident

I applied via Referral and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. How to book depreciation on fixed assets?
  • Ans. 

    Depreciation on fixed assets can be booked using various methods such as straight-line, reducing balance, and sum-of-the-years' digits.

    • Depreciation is the allocation of the cost of a fixed asset over its useful life.

    • Straight-line method charges an equal amount of depreciation each year.

    • Reducing balance method charges a higher amount of depreciation in the early years and lower in later years.

    • Sum-of-the-years' digits me...

  • Answered by AI
  • Q2. Can we raise a debit note ? How can it's file on GST portal ?
  • Ans. 

    Yes, a debit note can be raised and filed on the GST portal.

    • A debit note can be raised when there is an increase in the value of taxable supply.

    • It can be filed on the GST portal by logging in and selecting the 'Debit Note' option.

    • The details of the debit note such as the recipient's GSTIN, invoice number, and date must be provided.

    • The debit note must also be linked to the original invoice for which it is being raised.

    • O...

  • Answered by AI
  • Q3. What's bank reconciliation?
  • Ans. 

    Bank reconciliation is the process of comparing a company's bank statement with its own financial records to ensure accuracy.

    • Bank reconciliation involves comparing the bank statement with the company's own financial records.

    • It helps to identify any discrepancies or errors in the financial records.

    • The process involves matching transactions, such as deposits and withdrawals, between the two records.

    • Any differences are th...

  • Answered by AI
  • Q4. How many types of TDS return ?
  • Ans. 

    There are 4 types of TDS return.

    • Form 24Q for salaries

    • Form 26Q for payments other than salaries

    • Form 27Q for payments made to non-residents

    • Form 27EQ for TCS

  • Answered by AI
  • Q5. What is rate of ESIC and EPFO contribution employer and employee ?
  • Ans. 

    ESIC and EPFO contribution rates for employer and employee.

    • ESIC contribution rate for employer is 3.25% and for employee is 0.75% of the employee's salary.

    • EPFO contribution rate for employer is 12% and for employee is 12% of the employee's basic salary.

    • ESIC is applicable for employees earning up to Rs. 21,000 per month and EPFO is applicable for all employees.

    • Employers with less than 10 employees can opt for the Atal P

  • Answered by AI
  • Q6. Threshold limit of TDS
  • Ans. 

    Threshold limit of TDS refers to the maximum amount of tax that can be deducted at source.

    • The threshold limit for TDS varies depending on the type of payment being made.

    • For example, the threshold limit for TDS on salary payments is Rs. 2.5 lakhs per annum.

    • For TDS on rent payments, the threshold limit is Rs. 2.4 lakhs per annum.

    • If the payment exceeds the threshold limit, TDS is deducted at the applicable rate.

    • The thresh...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was too top. It lasted for 3 hours.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. BOQ preparations
  • Q2. Billing conditions
  • Ans. 

    Billing conditions refer to the terms and conditions related to payment for goods or services provided.

    • Billing conditions may include payment due dates, late fees, and accepted forms of payment.

    • They may also specify the frequency of billing, such as monthly or quarterly.

    • In some cases, billing conditions may be negotiated between the provider and the client.

    • For example, a software development company may require a depos...

  • Answered by AI
  • Q3. 60% running for supply
  • Q4. Final customer billing
  • Q5. 30% supply 90% erection
  • Q6. Closer billing condition
  • Ans. 

    Closer billing condition refers to the payment terms that are agreed upon between the client and the service provider.

    • It specifies when the payment is due and under what conditions

    • It is usually agreed upon before the project starts

    • It can be based on milestones or time-based

    • Example: 50% payment upon completion of design phase and remaining 50% upon project completion

  • Answered by AI
  • Q7. 10% for supply 10% for erection
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Coding Test 

Great knowledge on c

Round 2 - Technical 

(2 Questions)

  • Q1. What is H bridge
  • Ans. 

    An H bridge is an electronic circuit that enables a voltage to be applied across a load in either direction.

    • Consists of four switching elements (transistors or MOSFETs)

    • Allows bidirectional control of a load

    • Commonly used in motor control applications

    • Can be used to control the direction of DC motors

  • Answered by AI
  • Q2. What is a transformer in an appliance
  • Ans. 

    A transformer in an appliance is a device that converts high voltage electricity to lower voltage for safe use.

    • Transformers consist of primary and secondary coils of wire wrapped around a core

    • They work on the principle of electromagnetic induction

    • Examples include transformers in power adapters for electronic devices

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Great company moderate interview
Round 1 - Technical 

(2 Questions)

  • Q1. Asking about solar knowledge
  • Q2. Solar PV Module and design orientated
Round 2 - HR 

(2 Questions)

  • Q1. Asked about salary expectation
  • Q2. Asked about joining date

Interview Preparation Tips

Interview preparation tips for other job seekers - Apply the swlelect energy systems for grow your career. but

Electrical Research & Development Association Interview FAQs

How many rounds are there in Electrical Research & Development Association Government Apprentice Trainee interview?
Electrical Research & Development Association interview process usually has 2 rounds. The most common rounds in the Electrical Research & Development Association interview process are Resume Shortlist and Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

GAO Tek Interview Questions
4.4
 • 201 Interviews
Hind Rectifiers Interview Questions
3.6
 • 14 Interviews
Finisar Interview Questions
4.4
 • 12 Interviews
View all

Electrical Research & Development Association Government Apprentice Trainee Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

4.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Engineer
177 salaries
unlock blur

₹1 L/yr - ₹8.6 L/yr

Field Engineer
86 salaries
unlock blur

₹1 L/yr - ₹4.1 L/yr

Deputy Engineer
67 salaries
unlock blur

₹3.5 L/yr - ₹7.8 L/yr

Engineer
33 salaries
unlock blur

₹2.2 L/yr - ₹11.8 L/yr

Electrical Engineer
24 salaries
unlock blur

₹1 L/yr - ₹8.4 L/yr

Explore more salaries
Compare Electrical Research & Development Association with

GAO Tek

4.4
Compare

Amphenol Interconnect

4.2
Compare

East India Udyog

4.0
Compare

SasMos HET Technologies

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview