Filter interviews by
Clear (1)
Great knowledge on c
An H bridge is an electronic circuit that enables a voltage to be applied across a load in either direction.
Consists of four switching elements (transistors or MOSFETs)
Allows bidirectional control of a load
Commonly used in motor control applications
Can be used to control the direction of DC motors
A transformer in an appliance is a device that converts high voltage electricity to lower voltage for safe use.
Transformers consist of primary and secondary coils of wire wrapped around a core
They work on the principle of electromagnetic induction
Examples include transformers in power adapters for electronic devices
Top trending discussions
posted on 17 Jan 2021
The clearance between punch pin and material depends on the material type, thickness, and punch diameter.
Clearance is the gap between the punch pin and the material being punched.
It is important to have the correct clearance to avoid damage to the punch and material.
Clearance can vary depending on the material type, thickness, and punch diameter.
A general rule of thumb is to have a clearance of 10-20% of the material t...
I applied via Walk-in and was interviewed before Jul 2020. There were 3 interview rounds.
posted on 22 Jul 2021
I applied via Indeed and was interviewed in Jun 2021. There was 1 interview round.
posted on 14 Nov 2019
I applied via Approached by Company and was interviewed in Sep 2023. There were 3 interview rounds.
Education related Questions Asked
There are seven basic types of logic gates: AND, OR, NOT, NAND, NOR, XOR, and XNOR.
AND gate: output is high only if all inputs are high
OR gate: output is high if any input is high
NOT gate: output is the inverse of the input
NAND gate: output is low only if all inputs are high
NOR gate: output is low if any input is high
XOR gate: output is high if inputs are different
XNOR gate: output is high if inputs are the same
I applied via Campus Placement
FPI (Floating Point Interpolation) is used in computer graphics to smooth out curves and edges.
FPI is a mathematical algorithm used to interpolate values between two points.
It is commonly used in computer graphics to create smooth curves and edges.
FPI is also used in audio processing to interpolate between samples.
Examples of FPI in action include anti-aliasing, texture mapping, and image resizing.
MCCB stands for Molded Case Circuit Breaker, a type of electrical protection device.
MCCBs are used to protect electrical circuits from overloads and short circuits.
They have adjustable trip settings for different levels of protection.
Commonly used in industrial and commercial applications.
Examples include Siemens, Schneider Electric, and ABB MCCBs.
The panel size refers to the dimensions of the control panel used in the production process.
Panel size can vary depending on the specific equipment and machinery being used.
Common panel sizes include 24x24 inches, 36x36 inches, and 48x48 inches.
Panel size is important for determining the layout and placement of components within the control panel.
Panel size may also impact the overall footprint of the production equipm
An auto transformer is a type of transformer where part of the winding is common to both the primary and secondary circuits.
Auto transformers have only one winding with multiple taps for input and output connections.
They are more efficient and cost-effective compared to traditional transformers.
Auto transformers are commonly used in voltage regulation applications.
Example: A 220V to 110V step-down auto transformer.
A motor is a device that converts electrical energy into mechanical energy. There are various types of motors including AC motors, DC motors, and servo motors.
A motor is a machine that converts electrical energy into mechanical energy
Types of motors include AC motors, DC motors, and servo motors
AC motors run on alternating current and are commonly used in household appliances
DC motors run on direct current and are ofte...
A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit.
Automatically interrupts electrical flow when a fault is detected
Can be reset manually after tripping
Protects electrical devices and wiring from damage
Commonly used in homes, buildings, and industrial settings
Examples include thermal-magnetic, magnetic, and hydraulic-magnetic circuit break
The type of AC motor commonly used in production engineering is the induction motor.
The most common type of AC motor used in production engineering is the induction motor.
Induction motors are reliable, cost-effective, and require minimal maintenance.
Other types of AC motors used in production engineering include synchronous motors and DC motors for specific applications.
Examples of induction motor applications in produ...
Motors convert electrical energy into mechanical energy, while generators convert mechanical energy into electrical energy.
Motors use electricity to produce motion, while generators use motion to produce electricity
Motors have a rotor that spins within a stator, while generators have a rotor that is turned by an external force
Motors are commonly used in appliances, vehicles, and industrial machinery, while generators a
based on 1 interview
Interview experience
based on 3 reviews
Rating in categories
Sales Executive
16
salaries
| ₹0 L/yr - ₹0 L/yr |
Territory Sales Manager
15
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Area Sales Manager
12
salaries
| ₹0 L/yr - ₹0 L/yr |
Accounts Officer
11
salaries
| ₹0 L/yr - ₹0 L/yr |
Havells
Panasonic Life Solutions India
Legrand
Schneider Electric