Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by DesignTech Systems Team. If you also belong to the team, you can get access from here

DesignTech Systems Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

DesignTech Systems Junior Mechanical Engineer Interview Questions and Answers

Updated 31 Jan 2025

DesignTech Systems Junior Mechanical Engineer Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Difference between through curve mess and through curve?
  • Ans. 

    Through curve mesh is a 3D model created by connecting points on a curve, while through curve is a command used in CAD software to create a curve passing through specified points.

    • Through curve mesh is a 3D model created by connecting points on a curve to form a mesh surface.

    • Through curve command in CAD software is used to create a curve passing through specified points or existing curves.

    • Through curve mesh is commonly ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Avoid joining Design Tech System in Chennai due to significant community conflicts; it is advisable not to consider this inadequate manpower supply company.

Interview questions from similar companies

Senior Engineer Interview Questions & Answers

HCLTech user image raja reddy duggi reddy

posted on 27 Apr 2021

Interview Questionnaire 

2 Questions

  • Q1. Engineering Technical
  • Q2. Mainly on Engineering Design

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is AD dns dhcp?
  • Ans. 

    AD DNS DHCP are Microsoft technologies used for network management and authentication.

    • Active Directory (AD) is a directory service used for authentication and authorization of users and computers in a network.

    • Domain Name System (DNS) is used for name resolution of network resources.

    • Dynamic Host Configuration Protocol (DHCP) is used for automatic IP address assignment to network devices.

    • AD, DNS, and DHCP are often used ...

  • Answered by AI
  • Q2. What is IaaS SaaS PaaS?
  • Ans. 

    IaaS, SaaS, and PaaS are cloud computing models that provide different levels of infrastructure, software, and platform services.

    • IaaS (Infrastructure as a Service) provides virtualized computing resources over the internet, such as servers, storage, and networking.

    • SaaS (Software as a Service) delivers software applications over the internet, eliminating the need for local installation and maintenance.

    • PaaS (Platform as ...

  • Answered by AI
Round 3 - Aptitude Test 

General questions for 1 hors online exams

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident in your role and select which role you want to work

Skills evaluated in this interview

I applied via Naukri.com and was interviewed before May 2017. There were 2 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Based on resume and simple technical questions

Interview Preparation Tips

Check for client and kind of project you get.. get clear idea of nature of work. Else you might be disappointed later

I applied via Naukri.com and was interviewed before Jul 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Tell me about design of power plant
  • Ans. 

    The design of a power plant involves various components and considerations to ensure efficient generation of electricity.

    • Power plants are designed to convert various energy sources into electricity.

    • The design includes selecting the appropriate type of power plant based on the energy source, such as coal, natural gas, nuclear, hydro, or renewable sources.

    • The design also involves determining the capacity and layout of th...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Superb

Skills evaluated in this interview

Interview Questionnaire 

1 Question

  • Q1. Technical and projects

I was interviewed before Feb 2021.

Round 1 - One-on-one 

(1 Question)

  • Q1. Technical knowledge & Design concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - be strong on technical.Functional knowledge essential
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Cantilever beam explanation
  • Ans. 

    A cantilever beam is a beam supported at only one end, with the other end free to move or rotate.

    • Cantilever beams are commonly used in construction and engineering for structures like balconies, bridges, and diving boards.

    • The fixed end of the beam is called the 'support' while the free end is called the 'tip'.

    • Cantilever beams experience bending moments and shear forces due to the load applied at the free end.

    • Examples o...

  • Answered by AI
  • Q2. Hypothesis equation
  • Q3. Apply GD and T for given drawing,
Round 2 - Tool test 

(1 Question)

  • Q1. Model the part from given drawing
  • Ans. 

    Modeling a part from a given drawing in an interview for Senior Engineer position.

    • Carefully analyze the dimensions and features of the part in the drawing

    • Use CAD software to create a 3D model based on the drawing

    • Ensure accuracy and precision in the modeling process

    • Consider material properties and manufacturing processes while modeling

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Quest Global Senior Engineer interview:
  • Corporate Social Responsibility
  • adaptability
Interview preparation tips for other job seekers - Good to have CAD knowledge .
Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
Selected Selected

I applied via Walk-in and was interviewed in Feb 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the difference between HCF and LCF?
  • Ans. 

    HCF (Highest Common Factor) is the largest number that divides two or more numbers without leaving a remainder, while LCM (Lowest Common Multiple) is the smallest number that is a multiple of two or more numbers.

    • HCF is also known as GCD (Greatest Common Divisor)

    • HCF is used to simplify fractions and find the highest common factor of two or more numbers

    • LCM is used to find the smallest common multiple of two or more numbe

  • Answered by AI
  • Q2. All concepts from HCF and LCF. ramberg osgood equation LCF graph SWT method Morrows Method All terms was in detail BM SF variations in different sections. Some basic FEM question What is cyclic symmetr...
Round 2 - Technical 

(1 Question)

  • Q1. Pls refer first round question only
Round 3 - HR 

(1 Question)

  • Q1. Only general questions like salary discussion.

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls go through the basic only.
Round 1 - Aptitude Test 

Easy round with few days of Practice you can easily crack this round

Round 2 - Technical 

(1 Question)

  • Q1. Question on Past experience, for freshers Questions on their course of study

Interview Preparation Tips

Interview preparation tips for other job seekers - Work Smart, Keep yourself up-to-date, Complete Certification trainings, Seek for Opportunities.

DesignTech Systems Interview FAQs

How many rounds are there in DesignTech Systems Junior Mechanical Engineer interview?
DesignTech Systems interview process usually has 1 rounds. The most common rounds in the DesignTech Systems interview process are One-on-one Round.

Tell us how to improve this page.

DesignTech Systems Junior Mechanical Engineer Interview Process

based on 1 interview

Interview experience

1
  
Bad
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.5k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
Quest Global Interview Questions
3.6
 • 301 Interviews
Cyient Interview Questions
3.6
 • 284 Interviews
KPIT Technologies Interview Questions
3.4
 • 281 Interviews
Tata Technologies Interview Questions
3.6
 • 259 Interviews
Webkul Software Interview Questions
3.8
 • 57 Interviews
Softenger Interview Questions
4.1
 • 52 Interviews
View all
DesignTech Systems Junior Mechanical Engineer Salary
based on 4 salaries
₹2.2 L/yr - ₹3 L/yr
20% less than the average Junior Mechanical Engineer Salary in India
View more details

DesignTech Systems Junior Mechanical Engineer Reviews and Ratings

based on 2 reviews

2.8/5

Rating in categories

1.9

Skill development

3.9

Work-life balance

2.8

Salary

3.9

Job security

2.8

Company culture

3.6

Promotions

2.8

Work satisfaction

Explore 2 Reviews and Ratings
Design Engineer
439 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Service Engineer
139 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engg. Design
85 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
84 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

CAE Engineer
78 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare DesignTech Systems with

Geometric

3.0
Compare

Tata Technologies

3.6
Compare

KPIT Technologies

3.4
Compare

Cadcamguru Solutions

4.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview