Upload Button Icon Add office photos

DENSO

Compare button icon Compare button icon Compare

Filter interviews by

DENSO Production Operator Interview Questions and Answers

Updated 16 Jun 2023

DENSO Production Operator Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic information knowledge and company about

Round 3 - One-on-one 

(2 Questions)

  • Q1. About my trade relative
  • Q2. About my family and my experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Need on roll jobs

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is productivity in business
  • Ans. 

    Productivity in business refers to the efficiency and effectiveness of the production process.

    • Productivity is the measure of output per unit of input.

    • It is important for businesses to maximize productivity to increase profits and remain competitive.

    • Factors that can affect productivity include technology, employee training, and management practices.

    • Examples of productivity measures include units produced per hour, reven...

  • Answered by AI
  • Q2. How you handling manpower

Interview Preparation Tips

Interview preparation tips for other job seekers - Ex

I applied via Walk-in and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What's your qualifications
  • Ans. 

    I have a Bachelor's degree in Mechanical Engineering and 5 years of experience in production engineering.

    • Bachelor's degree in Mechanical Engineering

    • 5 years of experience in production engineering

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Yes sir doing job self introduction first next qualifications details
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is a biw fixture
  • Ans. 

    A BIW fixture is a tool used in automotive manufacturing to hold and position the body-in-white during assembly.

    • BIW stands for Body-In-White, which refers to the stage of automotive manufacturing where the car body is assembled but not yet painted or trimmed.

    • The fixture is designed to hold the car body in a precise position during assembly, ensuring that all components fit together correctly.

    • BIW fixtures are typically ...

  • Answered by AI
  • Q2. What is 321 principle
  • Ans. 

    321 principle is a method of prioritizing tasks based on their urgency and importance.

    • The principle suggests dividing tasks into three categories: important and urgent, important but not urgent, and urgent but not important.

    • Tasks that are both important and urgent should be given the highest priority.

    • Examples of tasks that fall into each category include: important and urgent - a deadline for a project, important but n...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Sef intro, strength and weaknesss

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically strong. Needed good software knowledge. Good communication skills
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. Engineing drawing
  • Ans. 1st angle and 3rd angle difrrenent
  • Answered Anonymously
  • Q2. What is tolarance
  • Ans. 

    Tolerance refers to the acceptable range of variation in a physical dimension or property of a material or product.

    • Tolerance is the difference between the maximum and minimum limits of a dimension or property.

    • It ensures that parts fit together properly and function as intended.

    • Tolerance can be specified as a numerical value or a range, such as +/- 0.1mm.

    • Examples include the tolerance for the diameter of a shaft or the

  • Answered by AI
  • Q3. Micro meter least count
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale.

    • The least count of a micrometer is typically 0.01mm or 0.001mm depending on the type of micrometer.

    • It is determined by the number of divisions on the thimble and the main scale.

    • For example, a micrometer with 50 divisions on the thimble and a main scale reading in mm will have a least count of 0.01mm.

  • Answered by AI
  • Q4. O.01 least count
  • Q5. What is fig and fixture
  • Ans. 

    A jig is a type of tool used to control the location and/or motion of another tool. A fixture is a work-holding or support device used in the manufacturing industry.

    • Jigs are used to guide cutting tools, while fixtures are used to hold workpieces in place during machining operations.

    • Jigs and fixtures are commonly used in manufacturing processes such as welding, drilling, and milling.

    • Examples of jigs include drill jigs, ...

  • Answered by AI
  • Q6. Tool ko guid krta hai and fixture job ko hold krta hai

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself
Round 2 - Technical 

(1 Question)

  • Q1. Metal non metal
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Related to diploma subjects
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Introdction about project
  • Q2. About internship
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Salary discussed
Round 2 - Technical 

(1 Question)

  • Q1. Related job role discrimination
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is the difference between motor and generator?
  • Ans. 

    Motors convert electrical energy into mechanical energy, while generators convert mechanical energy into electrical energy.

    • Motors use electricity to produce motion, while generators use motion to produce electricity

    • Motors have a rotor that spins within a stator, while generators have a rotor that is turned by an external force

    • Examples of motors include electric fans and washing machines, while examples of generators in

  • Answered by AI

DENSO Interview FAQs

How many rounds are there in DENSO Production Operator interview?
DENSO interview process usually has 3 rounds. The most common rounds in the DENSO interview process are Resume Shortlist, Aptitude Test and One-on-one Round.

Tell us how to improve this page.

DENSO Production Operator Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 422 Interviews
Bosch Interview Questions
4.2
 • 331 Interviews
ABB Interview Questions
4.1
 • 237 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
Hitachi Interview Questions
4.0
 • 81 Interviews
View all
DENSO Production Operator Salary
based on 4 salaries
₹1.8 L/yr - ₹2.2 L/yr
38% less than the average Production Operator Salary in India
View more details

DENSO Production Operator Reviews and Ratings

based on 2 reviews

4.1/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

3.0

Job security

5.0

Company culture

3.0

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Assistant Manager
269 salaries
unlock blur

₹7 L/yr - ₹17.5 L/yr

Deputy Manager
173 salaries
unlock blur

₹11 L/yr - ₹24 L/yr

Engineer
164 salaries
unlock blur

₹3.6 L/yr - ₹10 L/yr

Senior Engineer
149 salaries
unlock blur

₹6 L/yr - ₹12.5 L/yr

Production Engineer
89 salaries
unlock blur

₹1.8 L/yr - ₹9 L/yr

Explore more salaries
Compare DENSO with

Bosch

4.2
Compare

Yazaki

3.8
Compare

Faurecia

3.9
Compare

Hitachi Astemo

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview