Filter interviews by
Fundamental and controlling system
The device that is very sensational in low voltage protective system is a Ground Fault Circuit Interrupter (GFCI).
Ground Fault Circuit Interrupter (GFCI) is a device that quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shock.
GFCIs are commonly used in areas where water and electricity may come into contact, such as bathrooms, kitchens, and outdoor outlets.
They work by constantly mo...
Yes, you should check for a possible short circuit or reversed polarity.
Check for a possible short circuit in the wiring
Check for reversed polarity in the electrical connections
Ensure proper grounding of the system
Verify the connections at the distribution board
Consult with a senior electrician if unsure
The 10 safe methods when working on an electrical panel include proper training, de-energizing the panel, using appropriate PPE, and following lockout/tagout procedures.
Ensure you are properly trained and qualified to work on electrical panels.
Always de-energize the panel before starting any work.
Use appropriate personal protective equipment (PPE) such as insulated gloves and safety glasses.
Follow lockout/tagout proced...
The suitable cable size for a 15 Hp induction motor would typically be around 10 mm.
The cable size for a motor depends on factors like the motor's power rating, voltage, and distance from the power source.
For a 15 Hp motor, a cable size of around 10 mm would be suitable to handle the power requirements.
It is important to consult with a qualified electrician or refer to the motor manufacturer's guidelines for the exact
I applied via Walk-in and was interviewed in Mar 2022. There was 1 interview round.
Electricity is the flow of electrons through a conductor.
Electricity is a form of energy that powers most of our modern devices.
It is created by the movement of electrons from one atom to another.
Electricity can be generated from various sources such as coal, wind, solar, and hydro power.
It can be dangerous if not handled properly and can cause electric shock or fire.
Electricity is measured in units of volts, amps, and
I applied via Naukri.com and was interviewed in Jul 2021. There was 1 interview round.
Cpk values are a statistical measure used to determine the capability of a process to produce products within specification limits.
Cpk values are used in quality control to ensure that a process is capable of producing products that meet customer requirements.
Cpk values are calculated using the process mean, process standard deviation, and specification limits.
A Cpk value of 1.0 or higher indicates that the process is ...
posted on 15 Apr 2022
I applied via AmbitionBox and was interviewed before Apr 2021. There were 2 interview rounds.
based on 1 interview
Interview experience
Assistant Manager
246
salaries
| ₹5.5 L/yr - ₹15.4 L/yr |
Deputy Manager
134
salaries
| ₹5.9 L/yr - ₹19.5 L/yr |
Assistant Officer
87
salaries
| ₹3.6 L/yr - ₹7.7 L/yr |
Joint Manager
81
salaries
| ₹10 L/yr - ₹25 L/yr |
Executive
59
salaries
| ₹3.5 L/yr - ₹9.5 L/yr |
Grasim Industries
Tata Chemicals
Pidilite Industries
UPL