i
Privi Speciality Chemicals
Filter interviews by
I applied via AmbitionBox and was interviewed before Apr 2021. There were 2 interview rounds.
Top trending discussions
I applied via Walk-in and was interviewed in Mar 2022. There was 1 interview round.
Electricity is the flow of electrons through a conductor.
Electricity is a form of energy that powers most of our modern devices.
It is created by the movement of electrons from one atom to another.
Electricity can be generated from various sources such as coal, wind, solar, and hydro power.
It can be dangerous if not handled properly and can cause electric shock or fire.
Electricity is measured in units of volts, amps, and
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
Paint is a liquid or paste material used to add color and protection to surfaces.
Paint is made up of pigments, binders, solvents, and additives.
Different types of paint include oil-based, water-based, and latex.
Paint can be used for decorative purposes or to protect surfaces from damage.
Paint can be applied using brushes, rollers, or sprayers.
Common paint finishes include matte, satin, and gloss.
1kl is equal to 1000 liters.
1kl = 1000 liters
kl stands for kiloliter
Used to measure volume of liquids
Solvents are liquids used to dissolve or dilute other substances. Paints are made up of pigments, binders, solvents, and additives.
Solvents are used to dissolve or dilute other substances in order to create a solution.
Paints are made up of pigments, binders, solvents, and additives.
Common solvents used in paint making include mineral spirits, turpentine, and acetone.
Solvents are important in paint making because they h...
Excel is a spreadsheet software used for data analysis and management. MSDS stands for Material Safety Data Sheet.
Excel is used for organizing and analyzing data in a tabular format
It allows users to perform calculations, create charts and graphs, and automate tasks
MSDS is a document that provides information about the properties and hazards of a chemical substance
It includes information on handling, storage, and emerg...
A discrepancy report is a document that highlights differences between two sets of data and identifies the reasons for the differences.
A discrepancy report is used to identify and resolve discrepancies between two sets of data.
It is important to include the reasons for the discrepancies in the report.
Examples of discrepancies include differences in inventory counts or financial statements.
The report should be clear and...
Industrial norms include safety standards that must be maintained to ensure workplace safety.
Safety standards are guidelines set by regulatory bodies to ensure safe working conditions.
Precautions include wearing appropriate personal protective equipment, following safety procedures, and reporting any hazards.
Examples of safety standards include OSHA in the US and ISO in Europe.
Safety standards cover areas such as elect...
posted on 6 Mar 2020
Mcb stands for Miniature Circuit Breaker and MCCB stands for Molded Case Circuit Breaker.
Mcb is a type of circuit breaker that is used for low voltage applications.
MCCB is a type of circuit breaker that is used for high voltage applications.
Both Mcb and MCCB are used to protect electrical circuits from overloads and short circuits.
Mcb is usually rated for currents up to 100 amps, while MCCB can handle currents up to 25...
Current and voltage are two fundamental concepts in electricity. Current is the flow of electric charge, while voltage is the potential difference that drives the flow.
Current is the rate of flow of electric charge, measured in amperes (A).
Voltage is the force or pressure that pushes the electric charge to flow, measured in volts (V).
Current flows through a conductor, while voltage exists across a conductor.
Current is ...
A unit is a standard measurement used to quantify physical quantities. Current is measured in amperes (A) and voltage is measured in volts (V).
A unit is a fixed quantity used as a standard of measurement.
Current is the flow of electric charge in a circuit and is measured in amperes (A).
Voltage is the electric potential difference between two points in a circuit and is measured in volts (V).
The unit of current, ampere, ...
There are several types of transformers used in electrical systems.
Power Transformers
Distribution Transformers
Instrument Transformers
Auto Transformers
Isolation Transformers
Step-up and Step-down Transformers
Three-phase Transformers
Single-phase Transformers
D.OL starter is a type of motor starter used to start and stop three-phase motors.
D.OL stands for Direct-On-Line.
It is the simplest and most common type of motor starter.
It directly connects the motor to the power supply, providing full voltage to the motor.
It is suitable for small to medium-sized motors.
It does not provide any protection against overloading or short circuits.
It is commonly used in applications such as
An ampere (amp) is the unit of electric current in the International System of Units (SI).
Amperes measure the rate of flow of electric charge.
It is named after the French physicist André-Marie Ampère.
One ampere is defined as one coulomb of charge passing through a point in one second.
Amperes are used to measure the current flowing through electrical circuits.
Common household appliances like light bulbs and refrigerator...
I applied via Company Website and was interviewed in Jul 2024. There were 2 interview rounds.
Total 20 question assistant operator
Finally job decision yes or no
posted on 6 Jul 2024
I applied via Walk-in and was interviewed before Jul 2023. There was 1 interview round.
I appeared for an interview in Sep 2024, where I was asked the following questions.
I have 3 to 4 years of experience in team leadership, project management, and process improvement across various industries.
Led a team of 10 in a project that improved efficiency by 20%, resulting in significant cost savings.
Implemented a new training program that reduced onboarding time for new employees by 30%.
Managed cross-functional teams to deliver projects on time and within budget, enhancing collaboration.
Conduc...
Basic fundamentals of Graduation
Unit process involves a series of operations to bring about a physical or chemical change, while unit operation is a single step in a process.
Unit process involves multiple unit operations to achieve a desired outcome
Unit operation is a single step in a process that can be repeated multiple times
Examples of unit processes include distillation, filtration, and chemical reactions
Examples of unit operations include mixing
Absorption is the process of taking in or soaking up something.
Absorption is the movement of substances from the outside of a cell or organism to the inside.
It can refer to the process of nutrients being taken up by the body during digestion.
Absorption can also be used in the context of economics, where it refers to the total demand for goods and services in an economy.
Examples include the absorption of nutrients from ...
I applied via Campus Placement and was interviewed before Oct 2023. There were 3 interview rounds.
Technical test field related questions only
based on 3 reviews
Rating in categories
Production Officer
36
salaries
| ₹1.7 L/yr - ₹4.5 L/yr |
Officer
26
salaries
| ₹1.7 L/yr - ₹5.5 L/yr |
Assistant Manager
22
salaries
| ₹7.1 L/yr - ₹13.7 L/yr |
Executive Production
22
salaries
| ₹4.1 L/yr - ₹8.5 L/yr |
Senior Executive
18
salaries
| ₹6.2 L/yr - ₹14.5 L/yr |
Berger Paints
Pidilite Industries
SRF
Kansai Nerolac Paints