Upload Button Icon Add office photos

Filter interviews by

Dangote Refinery Interview Questions, Process, and Tips

Updated 1 Oct 2019

Dangote Refinery Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before Oct 2018. There was 1 interview round.

Interview Questionnaire 

12 Questions

  • Q1. I was asked Many Questions about piping.
  • Q2. Tell about IBR piping
  • Ans. 

    IBR piping refers to piping systems that comply with the Indian Boiler Regulations (IBR) for the design, fabrication, and installation of boilers and associated equipment.

    • IBR piping is used in industries where boilers are employed, such as power plants, refineries, and chemical plants.

    • It ensures the safety and efficiency of the piping system by following specific guidelines and standards set by the IBR.

    • IBR piping requi...

  • Answered by AI
  • Q3. Describe about hydro test of piping
  • Ans. 

    Hydro test is a process of testing the strength and integrity of piping by filling it with water and pressurizing it.

    • Hydro test is conducted to ensure that the piping system can withstand the design pressure and is free from leaks.

    • The piping is filled with water and pressurized to a specified pressure for a specified duration.

    • During the test, the piping is visually inspected for leaks, bulges, or any other deformities.

    • ...

  • Answered by AI
  • Q4. What is PWST ?
  • Ans. 

    PWST stands for Piping and Welding Skills Training.

    • PWST is a training program that focuses on developing skills in piping and welding.

    • It provides hands-on training in various aspects of piping and welding techniques.

    • PWST covers topics such as pipefitting, welding processes, blueprint reading, and safety procedures.

    • The program aims to prepare individuals for careers in the field of piping engineering and construction.

    • Ex...

  • Answered by AI
  • Q5. What is the basic difference between Pipe specification A106 Gr.A / Gr.B/ Gr.C.?
  • Ans. 

    The basic difference between Pipe specification A106 Gr.A / Gr.B/ Gr.C is the carbon content and mechanical properties.

    • A106 Gr.A has the lowest carbon content and is suitable for low-temperature applications.

    • A106 Gr.B has a slightly higher carbon content and is commonly used for high-temperature applications.

    • A106 Gr.C has the highest carbon content and offers better mechanical properties.

    • Gr.B and Gr.C are interchangeab...

  • Answered by AI
  • Q6. How can flanges be classified based on facing?
  • Ans. 

    Flanges can be classified based on facing into several types.

    • Flanges can be classified as flat face (FF), raised face (RF), ring type joint (RTJ), tongue and groove (T&G), and male and female (M&F) facing.

    • Flat face (FF) flanges have a flat surface and are used for low-pressure applications.

    • Raised face (RF) flanges have a raised surface to provide a sealing area and are commonly used in medium to high-pressure applicati...

  • Answered by AI
  • Q7. How can flanges be classified based on face finish?
  • Ans. 

    Flanges can be classified based on face finish into several types.

    • Raised face flanges

    • Flat face flanges

    • Ring type joint flanges

    • Tongue and groove flanges

    • Male and female flanges

  • Answered by AI
  • Q8. Where the smooth finish flange & serrated finish flange finds its use?
  • Ans. 

    Smooth finish flanges are used for low pressure applications, while serrated finish flanges are used for high pressure applications.

    • Smooth finish flanges have a flat surface and are typically used in low pressure systems.

    • Serrated finish flanges have a grooved surface and are used in high pressure systems to provide better grip and sealing.

    • Smooth finish flanges are commonly used in water supply systems, HVAC systems, an...

  • Answered by AI
  • Q9. What is the most commonly used material for Gasket?
  • Ans. 

    The most commonly used material for gaskets is rubber.

    • Rubber is widely used due to its excellent sealing properties.

    • It is resistant to various fluids and can withstand a wide range of temperatures.

    • Rubber gaskets are commonly used in piping systems, engines, and industrial applications.

    • Other materials like cork, silicone, and graphite are also used depending on the specific requirements.

  • Answered by AI
  • Q10. What is the difference between Pipe and Tube?
  • Ans. 

    Pipe and tube are both cylindrical hollow structures used for fluid transportation, but they differ in their dimensions and manufacturing processes.

    • Pipe is measured by its inner diameter (ID) and wall thickness, while tube is measured by its outer diameter (OD) and wall thickness.

    • Pipes are typically used for conveying fluids under pressure, while tubes are used for structural applications or conveying fluids at lower p...

  • Answered by AI
  • Q11. From which size onwards NB of pipe is equal to OD of Pipe?
  • Ans. 

    NB of pipe is equal to OD of Pipe from size 14 inches onwards.

    • NB stands for Nominal Bore and represents the internal diameter of a pipe.

    • OD stands for Outside Diameter and represents the total diameter of a pipe.

    • For most pipe sizes, the NB is smaller than the OD.

    • However, from size 14 inches onwards, the NB of the pipe is equal to the OD.

    • This means that for pipes with a size of 14 inches or larger, the internal diameter

  • Answered by AI
  • Q12. Tell about piping ?
  • Ans. 

    Piping refers to the system of pipes used to transport fluids or gases from one location to another.

    • Piping can be made of various materials such as steel, copper, or plastic.

    • It is used in various industries such as oil and gas, chemical, and water treatment.

    • Piping systems can be complex and require careful design and installation to ensure safety and efficiency.

    • Piping can be used for various purposes such as transporti...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I had described about piping properly.

Skills evaluated in this interview

Top Dangote Refinery Piping Engineer Interview Questions and Answers

Q1. What is the basic difference between Pipe specification A106 Gr.A / Gr.B/ Gr.C.?
View answer (4)

Piping Engineer Interview Questions asked at other Companies

Q1. What is the basic difference between Pipe specification A106 Gr.A / Gr.B/ Gr.C.?
View answer (4)

Interview questions from similar companies

Interview Preparation Tips

Round: Test
Experience: In quantitative aptitude i dont remember the questing exactly but alsomost all questings are similer to the questions in RS Agarwaal.. In reasoning and analytical section they will ask puzzles and if u read shakuntala devi and jimmers puzzle book it is more than sufficient.. In verbal section they have given around 2 passages and 5 questions for each passage dont waste more time in this section because it is time consuming.. they have given some fill in the blanks questions where we have to search for synonyms and antonyms No technical section was there
Total Questions: 75

Round: Technical Interview
Experience: Basically i am from Mechanical back ground they dint asked any questions related to software.... They asked questions like how do you update your self regarding your technical knowledge... have you thought of any innovative ideas recent past..

Round: HR Interview
Experience: In HR they asked 2 situation reaction tests. 1)she asked my hobbies and replied playing cricket... she posed a question to me that if i was appointed as cricket team captain for M-Tech mech team how i select my team.... i answered purely by performance no partiality like that.. but she asked to think more then she answered for the questions as... I alone cannot select the team because in M-Tech there may be more that 500 students so i have to take help from some of my friends and this shows attitude towards team work.... 2) She asked one more question like if i am a boss and there are 5 peoples working under me.. my boss given me one work that has to be completed in with in a month... now it is the last day of month and still 25% of work is remaining how i handle that situation... I answered that I will answer to the boss that from next time i will finish 1 months work in 20 days itself so that we will not be facing this kind of problems next time.. then she told ok....

General Tips: Infosys recruitment wont concentrate too much on technical side... they concentrate on logical and analytical thinking and situation reactions etc... so go through puzzles from shankuntala devi and jimmers... and some analytical and logical sections from RS agarwaal
Dont concentrate on technical questions because they wont ask any technical questions... you must prepare well for the written test and Interview will depend on your logical and analytical thinking and situation reactions.. all the best.. hope i will see you in Infosys next year....
College Name: NIT WARANGAL

Assistant Trainee Interview Questions & Answers

TCS user image YATISH KUMAR KESHWANI

posted on 9 Feb 2015

Interview Questionnaire 

22 Questions

  • Q1. What are the subjects you have command in?
  • Q2. Tell me about your final year project?
  • Q3. Tell me about the industrial training you had?
  • Q4. How does an induction motor works?
  • Q5. Why motor is rated in KW whereas Transformer and generator in KVA?
  • Ans. 

    Motors are rated in KW because they consume power, while transformers and generators are rated in KVA because they produce power.

    • Motors convert electrical energy into mechanical energy, so they consume power and are rated in KW.

    • Transformers and generators produce electrical energy, so they are rated in KVA based on their apparent power.

    • KVA takes into account both the real power (KW) and the reactive power (KVAR) produc...

  • Answered by AI
  • Q6. What is the type of motor used in ceiling fans?
  • Ans. 

    The type of motor used in ceiling fans is an induction motor.

    • Ceiling fans typically use single-phase induction motors.

    • These motors are designed to provide a constant speed and are efficient in converting electrical energy into mechanical energy.

    • The motor consists of a stator and a rotor, with the stator being the stationary part and the rotor being the rotating part.

    • The stator contains windings that create a rotating m...

  • Answered by AI
  • Q7. Hoe does a thermal power plant works?
  • Ans. 

    A thermal power plant generates electricity by converting heat energy into mechanical energy.

    • Thermal power plants use fossil fuels or nuclear energy to heat water and produce steam.

    • The steam drives a turbine, which is connected to a generator that produces electricity.

    • The heat source can be coal, natural gas, oil, or nuclear reactions.

    • The steam is condensed back into water and recycled in a closed-loop system.

    • Thermal p...

  • Answered by AI
  • Q8. Write a program to make a GP
  • Ans. 

    A program to generate a geometric progression (GP).

    • Take the first term, common ratio and number of terms as input.

    • Use a loop to calculate each term of the GP.

    • Print the generated GP as output.

  • Answered by AI
  • Q9. Write a program to print factorial using recursion
  • Ans. 

    A program to print factorial using recursion

    • Define a function to calculate factorial recursively

    • Base case: if the number is 0 or 1, return 1

    • Recursive case: multiply the number with factorial of (number - 1)

    • Print the factorial of a given number

  • Answered by AI
  • Q10. Write the logic to reverse a string without using string fnctions
  • Ans. 

    Logic to reverse a string without using string functions

    • Iterate through the string from the last character to the first

    • Create a new string and append each character to it in reverse order

  • Answered by AI
  • Q11. Tell me about yourself?
  • Q12. What are your hobbies?
  • Q13. Apart from your technical pat and studies what have you done in college?
  • Q14. What do you prefer, ethics or values?
  • Q15. Suppose you are working in office and somebody came and slapped you, what will you do?
  • Q16. Tell me about yourself for 5 minutes
  • Q17. What are your views about Mr. Narendra Modi as PM of India
  • Q18. Any extra curricular activities you have participated in school or college
  • Q19. What are your strengths?
  • Q20. What are your weaknesses?
  • Q21. Being an Electrical engineer why do you want to join an IT company
  • Q22. What do you know about TCS?

Interview Preparation Tips

Round: Test
Experience: In email writing one question was given describing the situation and maximum word limit. It has the keywords given to be used. 1 question, 10 minutes.This section is generally used to check your verbal ability. Make sure to use all the keywords given and complete it within time, with no spelling mistakes of course. Missing a keyword or a spelling mistake could be your goodbye to qualified list.The second section had 30 questions of quantitative aptitude. Duration 70 mins. There are questions from various sections, such as Time and speed, Time and distance, Data interpretation,etc.There are 2-3 star marked questions which have more weight-age. There my also be a dummy question who doesn't have any matching answer. Make sure uh don't attempt these questions.26-27 questions is the cut-off for qualified list.But you have to do the email writing part correctly.
Tips: Practice email writing online from various websites such as technicalbaba.com, indiageeks.comPractice quantitative aptitude as it is a must in any interview you will face. you can use R.S.Agarwal or CAT material.
Duration: 90 minutes
Total Questions: 30 + 1

Round: Interview
Experience: Greeting the interviewer is a must. Be confident and enthusiastic. Have your resume properly ready. Technical questions from your subject will be asked. Not a must that you should know any programming language like C, C++, JAVA.
Tips: Prepare 3-4 subjects of your core branch. Never try to flatter the interviewer. Be confident and answer the questions appropriately. Dont say directly " I DON'T KNOW". Atleast try even if you dont know the answer.

Round: Interview
Experience: There are certain questions which doesnt have direct answers. You have to be diplomatic about them. You should be able to see all the possible situation when a question like that is asked.

Round: Interview
Experience: The HR head may manipulate you, try to stress you, etc. Be calm and confident.Think before you speak. Prepare your answers before hand for general questions. Write your introduction on a paper and prepare it well so that you speak it confidently...
Tips: Be yourself. Be confident. Never argue with the interviewer.All the best

General Tips: Be presentable in the interview. Wear a watch. Show respect to the interviewer. Prepare 3-4 technical subjects well. Read last 15 days newspaper. Be confident when you speak. Improve your English if you are weak in it.
Skill Tips: ""
Skills: Verbal ability, Attitude, Technical knowledge, General knowledge
College Name: IMS ENGINEERING COLLEGE, GHAZIABAD
Motivation: TCS is a semi government company with a decent package and high job security.

Skills evaluated in this interview

Interview Preparation Tips

Round: Test
Experience: Questions were based on basic maths and english but time duration as per level of questions was very less. I was hardly able to attempt 90 question.
Tips: Firstly attempt questions from the topics in which you are more comfortable. Don't spend much time in thinking.
Duration: 60 minutes
Total Questions: 120

Round: Technical Interview
Experience: As I am from statistics background ao they asked me questions from regression and inference in depth. Rest all question were from basic stats. And yes they ask question from everything what is there in your resume.
Tips: Be ready for question from everything what is there in your resume and prepare them in advance.

Round: HR Interview
Experience: It was easy and hardly last for 10 min
Tips: Be confident on whatever you speak and prepare for general HR questions in advance.

College Name: IIT BOMBAY

Interview Preparation Tips

Round: Resume Shortlist
Experience: Candidates with CG equal to or higher than 8.0 were selected.

Round: Test
Experience: It was divided in 2 sets of 45 minutes each.
Coding: To write a function to find if a string is palindrome or not. 
Verbal+quant: These were CAT model questions.
Duration: 90 minutes

Round: Interview
Experience: There were 2 rounds of this interview. Both were HR and questions based on resume and some general questions were asked.
Tips: I think I was selected because of my CG, coding skills and communication skills.

General Tips: If you're preparing for core, make sure you start revising your subjects soon. Keep your notes and concentrate on structures.
Skill Tips: I started my preparations in November by going through case study material available in lan and solving CAT questions.
College Name: IIT MADRAS

Interview Preparation Tips

Round: Test
Experience:  Written test was CAT based primarily with no negative marking.
Tips: Almost everyone felt the time crunch., but the key is to maintain focus and yes no negative marking so informed guesses are a must.Prepare well for the test especially Quant+ RCs+DI.
Duration: 60 minutes
Total Questions: 60

Round: Group Discussion
Experience: GD was case study based. We were divided into groups of 8 and then we were allotted around 20 minutes to discuss the problem among ourselves and then finally come up with a solution which was to be demonstrated on a flip-chart and then was to be presented in about 8-10 min
Tips: Prepare for case studies from HBS Case Study and Wetfeet Case Study guides.
Duration: 30 minutes

Round: HR Interview
Experience: Only one round of interview was conduced. It was mostly HR based and the resume was discussed along with some common questions like the biggest failure and sucess in life, etc.Only one technical question was asked & the interviewers were very supportive and encouraging.
Tips: The key is to be yourself and take your time to properly frame the answers and then reply withconfidence.

Skill Tips: ""
Skills: Research Skills
College Name: IIT Roorkee

Interview Questions & Answers

HCLTech user image Anonymous

posted on 15 May 2015

Interview Preparation Tips

Round: Technical Interview
Experience: Technical Round:

When my turn came in I walked into the room and Found two people sitting over there. 
Wishing them Good Afternoon i was asked to take my seat and I sat comfortably. This is noted very carefully. I had a eye to eye contact with both of them. I handed over them my certificates for them to go through.

Then my interview started (I gave my resume to him)

Interviewer: Kiran Paul Kani… right..
Me: Yes, its kiran paul kanikaram

Interviewer: Ok Kiran I am dennis voice Trainer at HCL Tech. It seems from the resume that you are working for India Air Force and why do you want to change the Job

Me: Bracing up a little I said I am working with Indian Air Force and because of Family reason I am about to resign the Job and also since I have completed MCA I just wanted to pursue a Technical Job.

Interviewer: Can you give me some more details as to why you want to resign a Government job and join a private one?

Me: Yes, I would. Since I am having a family to look after and with the present job I am unable to keep my family with me and also since my job requires me to be available 24/7, 365 days this was not a problem when I did not have these responsibilities but now it has become compulsion for me to look after and for me I think what’s the use of earning the money and not enjoying them with family.

Interviewer: Ok tell me about yourself?

Me: I told about my schooling and the place I hail from and the job I was doing in brief.

Interviewer: Oh great you could do your Graduation and Post graduation while doing a job and don’t you feel that was difficult while serving the IAF?

Me: Yes, It was difficult but I just wanted to come up in life and I already knew the price I am going to pay and it had taken a lot of hard work but finally I could complete.

Interviewer: Do you know what kind of job you are going to do here in HCL?

Me: Yes, the position I am going to work is for technical process helping customers to get their issues resolved and giving technical support. 

Interviewer: Here is a passage and can you read it for me.

Me: I understood why he was asking so coolly I took time and read it comfortably.

(Now the interviewer showed me his laptop and told me to hear a conversation. I took the head set and listened the conversation)

Interviewer: What was the person trying to tell?
Me: I told him that the person was telling that he wanted a technical issue to be resolved pertaining to his Laptop.

Interviewer: What is the solution you have for him?

Me: I told him the procedure of how to solve his issue.

Interviewer: He smiled at me and said I would like to speak with my friend who wants to ask you about information. He works as a SME (subject Man Expert) and he picked up his cell and connected to that person and handed over me the phone and walked out of the room.

Interviewer: Hello Kiran I am Sam

Me: Hello sam

Interviewer: I work as a SME and hope Dennis told about me

Me: yes

Interviewer: Can you tell me how does a browser work?
Me: I said do you want me to explain the functionality of the browser.
Interviewer: yes
Me: I gave him the information of what he wanted.
Interviewer: can you tell me some thing about cookie and what it does?
Me: I told him the definition of cookie and the role it plays in the Brower functionality
Interviewer: Ok what will you do to change the settings of the browser?
Me: I explained him the process.
Interviewer: Tell me something about registry in windows?
Me: I told about the registry and told him that when ever an application is installed then it is this place that the registry keys are saved and based on this when ever we run the application it will fetch information from here and runs the application.
Interviewer: What happens when these registry keys are deleted or corrupted and how can you delete the registry keys?
Me: If the registry keys are deleted or corrupted then the application may not run or if it runs also it will create problems some  where else and to delete the registry keys we need type in Regedit command in the run window and press enter andthen from the registry window search for the keys to delete and selecting them we need to press delete key .Interviewer: Do you know Computer networks?
Me: Not fully but I have a fair idea 
Interviewer: Ok No issues. Thanks a lot.
Me: thanks a lot and gave back the cell to Dennis.
Interviewer: How was the interaction?
Me: It was good
(Dennis got a call and he typed in some thing in his laptop. I knew it was from sam)
Interviewer: Ok kiran please wait out side will get back to you in a few min.
Me: I said yes and walked out of the room and was little anxious but the people who were waiting outside wanted to inquire why it has taken a lot of time.
After some time Dennis along with Sam came up to the lounge area and called me and spoke to me saying that they were satisfied with my interview and told that they were checking my accent and my technical knowledge and told me that I was selected for this round and need to attend a written technical test and also if I clear there will be a HR round and if cleared will get the appointment letter. Then they handed over a sealed envelop and told me to give to the HR
I was a bit relaxed now and was waiting to go for the next round people around me congratulated. After few min a interview board member accompanied us in the Cab to another facility a few hundred meter away from this facility.
When we came to this facility we were given tags to enter the facility and Pooja came and called me into the cabin.

Round: HR Interview
Experience: HR Round
HR: Good afternoon Kiran and took the packet
Me: I said good Afternoon
HR: Now there will be a written test and that too MCQ type go through the question paper and answer them and you have 30 minutes.
Me: I took the paper and sat in the place assigned and went through the paper and answered them and after the time is up I handed over the answer sheet
HR: Please sit in the waiting room I will be back in few min.Me: I said Ok and waited in the waiting room.
After some time the HR came.
HR: Congrats you cleared the written test 
Me: Thanks 
HR: So you are a defense person and where are you working?
Me: Yes, I am working in Air Force Station Delhi.
HR: So you want to join a pvt organization from a govt organization, don’t you feel that you are loosing security of job?Me: Yes, I want to join a corporate sector since it was a dream for me and I think the circumstance have paved the way for me since I am also not interested to be in Air Force because I am away from my family and also this posting makes it very difficult for me to be with my family and it will be for five years. Secondly I don’t feel any that I am loosing Job security since any how I have to retire after 20 years of service and I have finished 12 years and I cannot justify to my duty if I am not interested. So owing to moral grounds I want to join a pvt organization.
HR: So you think that your family comes first than your job?
Me: It depends on how a person thinks but for me both are important because without money I cannot survive and without a job I cannot earn so I balance both Job and Family and prioritize them.
HR: What is the remuneration you are expecting from us?
ME: I am expecting a good remuneration from you but I would be happy if I am paid as per your organizations standards so that I might not feel that I am left out in comparison with my colleagues. 
HR: Are you willing to work in any shift?
Me: That would not be a problem for me because I have been doing duties in Air Force on the call and 24/7. So I do not have any problems
HR: Ok you may go..Me: I thanked her and walked out of the room.
After an hour the HR came and gave me all the details and told that I got Selected!!!
This gave me the confidence that I can do well in the future.
Though I did not join the Job it was a very good experience for me and it helped me in an interview which I attended in Bangalore in an IT company and which I have joined as a Quality Assurance Lead.

College Name: NA

Interview Preparation Tips

Round: Test
Experience: Simple Aptitude - just brush up basics - be quick in your solving.
Duration: 120min minutes
Total Questions: 50+10

Round: HR Interview
Experience: Pretty simple interview round - was asked few HR questions. Majorly it was a informative session where i was told about the job profile and tested whether I was willing to take up the responsibility & commitment.

College Name: IIT MADRAS
Motivation: Just applied gen. Got through.

Interview Questionnaire 

6 Questions

  • Q1. Given a Linked list , print yes if it is palindrome else print no
  • Q2. Print the level order traversal of the binary tree in the spiral form
  • Ans. 

    Print the level order traversal of binary tree in spiral form

    • Perform level order traversal of the binary tree

    • Alternate the direction of traversal for each level

    • Use a stack to reverse the order of nodes in each level

    • Print the nodes in the order of traversal

  • Answered by AI
  • Q3. Maximum of all subarrays of size k(Expected Time Complexity O(N). Input : arr[] = {1, 2, 3, 1, 4, 5, 2, 3, 6} k = 3 Output : 3 3 4 5 5 5 6
  • Ans. 

    Find the maximum element in each subarray of size k in a given array.

    • Iterate through the array from index 0 to n-k.

    • For each subarray of size k, find the maximum element.

    • Store the maximum elements in a separate array.

    • Return the array of maximum elements.

  • Answered by AI
  • Q4. Given Two sorted array of size size n each. Find the Kth largest element in these two array (Expected Time Complexity Log(n))
  • Ans. 

    To find the Kth largest element in two sorted arrays, we can use the merge step of merge sort algorithm.

    • Merge the two arrays into a single sorted array using a modified merge sort algorithm.

    • Return the Kth element from the merged array.

  • Answered by AI
  • Q5. Website having several web-pages. And also there are lot many user who are accessing the web-site. say user 1 has access pattern : x->y->z->a->b->c->d->e->f user 2 has access pattern : z->a->b->c->d user 3...
  • Q6. Given two array , one of size m+n and contains m element and other position are empty , 2nd array is of size n and contains n element. both array are sorted , now merge the second array to first one such t...
  • Ans. 

    Merge two sorted arrays into one sorted array with expected time complexity of (m+n).

    • Use a two-pointer approach to compare elements from both arrays and merge them into the first array.

    • Start comparing elements from the end of both arrays and place the larger element at the end of the first array.

    • Continue this process until all elements from the second array are merged into the first array.

  • Answered by AI

Interview Preparation Tips

Round: Test
Duration: 90 minutes

Skills: Algorithm , OS, DBMS, data structure
College Name: NIT BHOPAL

Skills evaluated in this interview

Interview Questionnaire 

1 Question

  • Q1. Questions were all resume based. Gave importance to Posiions of responsibilities

Interview Preparation Tips

Round: Group Discussion
Experience: I talked second and took a stance of defence with development. I tried to talk intermittently for a duration of approx 40 sec each time and for a total of 5 times.
Tips: U should be the guy who had talked the most in GD but care should be taken not to dominate it. Try to tell maximum number of points and try to exhaust all the points when you get your first opportunity.
Duration: 8 minutes

Round: Interview
Experience: They were just checking whether you have the necessary communication and managerial skills and how well you handle the stresses of interview.
Tips: Being thorough with the nooks and corner of your resume and keeping your head cool alone will ensure you get shortlisted.

General Tips: Stay coool throughout the process :)
College Name: IIT Madras

Dangote Refinery Interview FAQs

What are the top questions asked in Dangote Refinery interview?

Some of the top questions asked at the Dangote Refinery interview -

  1. What is the basic difference between Pipe specification A106 Gr.A / Gr.B/ Gr....read more
  2. From which size onwards NB of pipe is equal to OD of Pi...read more
  3. What is the most commonly used material for Gask...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Dangote Refinery interview
WalkIn
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

Tata Group Interview Questions
4.2
 • 357 Interviews
Adani Group Interview Questions
3.9
 • 176 Interviews
Bharat Petroleum Interview Questions
4.2
 • 152 Interviews
Nayara Energy Interview Questions
4.2
 • 78 Interviews
GAIL Interview Questions
4.5
 • 77 Interviews
Cairn Energy Interview Questions
4.0
 • 29 Interviews
View all

Dangote Refinery Reviews and Ratings

based on 28 reviews

3.2/5

Rating in categories

2.9

Skill development

2.8

Work-Life balance

2.8

Salary & Benefits

3.1

Job Security

2.7

Company culture

2.2

Promotions/Appraisal

2.8

Work Satisfaction

Explore 28 Reviews and Ratings
Commissioning Engineer
5 salaries
unlock blur

₹8.2 L/yr - ₹21 L/yr

Senior Electrical Technician
4 salaries
unlock blur

₹7 L/yr - ₹17 L/yr

Assistant Manager
3 salaries
unlock blur

₹35 L/yr - ₹48 L/yr

Electrical Engineer
3 salaries
unlock blur

₹28 L/yr - ₹30 L/yr

Operations Manager
3 salaries
unlock blur

₹22 L/yr - ₹35.9 L/yr

Explore more salaries
Compare Dangote Refinery with

Reliance Industries

4.0
Compare

Indian Oil Corporation

4.4
Compare

Bharat Petroleum

4.2
Compare

Hindustan Petroleum

4.2
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview