AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Cummins
Compare
Proud winner of ABECA 2025 - AmbitionBox Employee Choice Awards
Filter interviews by
Cummins Diploma Trainee Engineer Interview Questions and Answers for Freshers
6 Interview questions
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers are used to increase or decrease the voltage levels in electrical power transmission and distribution systems.
They consist of two or more coils of wire, known as windings, which are wound around a core made of magnetic material.
The primary winding is connected to the in...
A resistor is an electronic component that limits the flow of electric current in a circuit.
Resistors are used to control the amount of current flowing through a circuit.
They are passive components that dissipate energy in the form of heat.
Resistors are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.
They can be fixed resistors with a specific resistance value or variable resisto...
The first priority in Cummins is customer satisfaction.
Customer satisfaction is the top priority for Cummins.
Providing high-quality products and services to meet customer needs.
Building strong relationships with customers and exceeding their expectations.
Ensuring prompt and effective customer support and after-sales service.
Continuous improvement and innovation to deliver value to customers.
Microprocessors are general-purpose CPUs while microcontrollers are specialized for specific tasks.
Microprocessors are used in computers, smartphones, and other devices that require general-purpose computing.
Microcontrollers are used in embedded systems, such as home appliances, automotive systems, and medical devices.
Microprocessors typically have more processing power and memory than microcontrollers.
Microcontro...
Newtons law of motion describes the relationship between an object and the forces acting upon it.
First law states that an object at rest will remain at rest and an object in motion will remain in motion with a constant velocity unless acted upon by an unbalanced force.
Second law states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.
Thir...
There are two types of satellite communication: geostationary and low earth orbit.
Geostationary satellites are placed at a fixed point above the earth's equator and are used for TV broadcasting, weather forecasting, and military communication.
Low earth orbit satellites are placed closer to the earth's surface and are used for GPS, satellite phones, and remote sensing.
Satellite communication is important for global...
Cummins Diploma Trainee Engineer Interview Experiences for Freshers
5 interviews found
Anonymous
Selected
I applied via Campus Placement and was interviewed in Mar 2024. There was 1 interview round.
(2 Questions)
- Q1. Automobile Basic questions
- Q2. Final year project questions
Interview Preparation Tips
- Final year project questions
- Favorite subject
Aritra Dutta
I applied via Campus Placement and was interviewed in Aug 2022. There were 3 interview rounds.
(1 Question)
- Q1. Why you want to join Cummins rather than Other MNCs? How you serve to this Organization ? Tell me about Yourself .
- Ans.
I am drawn to Cummins for its innovation, values, and commitment to sustainability, aligning with my career aspirations and skills.
Innovation: Cummins is at the forefront of engine technology and sustainable solutions, which excites me as I want to contribute to cutting-edge projects.
Values: The company's core values of integrity, diversity, and community resonate with my personal beliefs, making it a place where I can...
(2 Questions)
- Q1. What is Resistor in Electronics?
- Ans.
A resistor is an electronic component that limits the flow of electric current in a circuit.
Resistors are used to control the amount of current flowing through a circuit.
They are passive components that dissipate energy in the form of heat.
Resistors are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.
They can be fixed resistors with a specific resistance value or variable resistors th...
- Q2. What is Transformer ?
- Ans.
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers are used to increase or decrease the voltage levels in electrical power transmission and distribution systems.
They consist of two or more coils of wire, known as windings, which are wound around a core made of magnetic material.
The primary winding is connected to the input v...
Interview Preparation Tips
Without this there is nothing else. Overall Company is really Good.
Go for It.
Selected
I applied via Campus Placement and was interviewed before Mar 2023. There were 2 interview rounds.
(1 Question)
- Q1. HR asked about myself, my hobbies, extra skills etc.
(1 Question)
- Q1. Questions about basic manufacturing process like welding, moulding, joints etc.
I applied via Campus Placement and was interviewed in Apr 2021. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. What about you generator ?
- Q2. Difference between microcontroller and microprocessors?
- Ans.
Microprocessors are general-purpose CPUs while microcontrollers are specialized for specific tasks.
Microprocessors are used in computers, smartphones, and other devices that require general-purpose computing.
Microcontrollers are used in embedded systems, such as home appliances, automotive systems, and medical devices.
Microprocessors typically have more processing power and memory than microcontrollers.
Microcontrollers...
- Q3. Newtons law of motion
- Ans.
Newtons law of motion describes the relationship between an object and the forces acting upon it.
First law states that an object at rest will remain at rest and an object in motion will remain in motion with a constant velocity unless acted upon by an unbalanced force.
Second law states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.
Third law...
- Q4. Which type of satellite communication
- Ans.
There are two types of satellite communication: geostationary and low earth orbit.
Geostationary satellites are placed at a fixed point above the earth's equator and are used for TV broadcasting, weather forecasting, and military communication.
Low earth orbit satellites are placed closer to the earth's surface and are used for GPS, satellite phones, and remote sensing.
Satellite communication is important for global conn...
Interview Preparation Tips
Skills evaluated in this interview
I applied via Campus Placement and was interviewed before Dec 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. What is first priority in cummins?
- Ans.
The first priority in Cummins is customer satisfaction.
Customer satisfaction is the top priority for Cummins.
Providing high-quality products and services to meet customer needs.
Building strong relationships with customers and exceeding their expectations.
Ensuring prompt and effective customer support and after-sales service.
Continuous improvement and innovation to deliver value to customers.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Diploma Trainee Engineer Interview Questions & Answers
Atlas Copco
Rounak kumar Thakur
posted on 24 Nov 2023
Selected
I applied via Campus Placement and was interviewed in Oct 2023. There were 4 interview rounds.
6 people's are sitting in a group and the hr panel had given me a topic that is internet is good and bad for students
(1 Question)
- Q1. They give geometrical drawings
(1 Question)
- Q1. Thermodynamic equation and cycle
- Ans.
Thermodynamic equations and cycles are fundamental concepts in engineering.
Thermodynamic equations describe the relationships between various properties of a system.
The first law of thermodynamics states that energy cannot be created or destroyed, only transferred or converted.
The second law of thermodynamics states that the entropy of an isolated system always increases.
Common thermodynamic cycles include the Carnot c...
Selected
I applied via Campus Placement and was interviewed in Oct 2023. There were 2 interview rounds.
Basic questions plus technical
(2 Questions)
- Q1. Strength and weakness
- Q2. Why should we hire you
Interview Preparation Tips
(1 Question)
- Q1. Electrical basic questions were asked
(1 Question)
- Q1. Transformers losses to be defined
- Ans.
Transformers losses refer to the energy lost in the transformer during the process of converting electrical energy from one voltage level to another.
Transformers losses can be broadly classified into two categories - copper losses and iron losses.
Copper losses occur due to the resistance of the transformer windings and are also known as I²R losses.
Iron losses occur due to the magnetic properties of the core material an...
Interview Preparation Tips
Diploma Trainee Engineer Interview Questions & Answers
John Deere
mukesh dubey
posted on 17 Aug 2021
I applied via Walk-in and was interviewed in Jul 2021. There were 4 interview rounds.
Interview Questionnaire
6 Questions
- Q1. Stress Kya hai
- Ans.
Stress is a physical and emotional response to challenging situations, affecting mental and physical health.
Stress can be caused by various factors, including work pressure, personal relationships, and financial issues.
There are two types of stress: acute stress (short-term) and chronic stress (long-term).
Examples of acute stress include a job interview or an exam, while chronic stress may arise from ongoing issues lik...
- Q2. Strain kya hai
- Ans.
Strain is the measure of deformation representing the displacement between particles in a material due to applied stress.
Strain is defined as the change in length divided by the original length.
It can be expressed as a percentage or a ratio.
Types of strain include tensile strain (stretching) and compressive strain (squeezing).
For example, if a metal rod is stretched from 1m to 1.01m, the tensile strain is 0.01 or 1%.
St...
- Q3. Toughness Kya hai
- Ans.
Toughness is the ability of a material to absorb energy and deform plastically without fracturing.
Toughness combines strength and ductility, allowing materials to withstand stress.
Example: Steel is tough, making it suitable for construction and manufacturing.
Toughness is measured using tests like Charpy or Izod impact tests.
Materials with high toughness can endure sudden impacts without breaking.
- Q4. Jab kisi pind athwa vastu par external internal force lgta hai to us pind me akar Ki bad law hoti pind mud Jayegi par wah a lag a lag ni hoti us avast ha KO hi toughness khate hai
- Q5. Hardness Kya hai
- Ans.
Hardness is a material's resistance to deformation, scratching, or indentation, indicating its durability and strength.
Hardness is measured using scales like Mohs, Brinell, and Rockwell.
Mohs scale ranges from talc (1) to diamond (10), indicating relative hardness.
Brinell hardness test uses a steel ball to indent the material and measure resistance.
Rockwell hardness test measures depth of indentation under a specific lo...
- Q6. Kisi vastu par external internal force lgte vastu k akar changing athawa bad law na hokar balki a lag a lag hojata hai use hi hardness Khte hai
Interview Preparation Tips
(2 Questions)
- Q1. Basics about electronics and electrical
- Q2. Switch gear and protection system
Cummins Interview FAQs
The duration of Cummins Diploma Trainee Engineer interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Cummins Interviews By Designations
- Cummins Diploma Trainee Engineer Interview Questions
- Cummins Intern Interview Questions
- Cummins Junior Shop Manager Interview Questions
- Cummins Quality Engineer Interview Questions
- Cummins Junior Manager Interview Questions
- Cummins Service Engineer Interview Questions
- Cummins Product Design Engineer Interview Questions
- Cummins Design Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Engineer Interview Questions
- Design Engineer Interview Questions
- Production Engineer Interview Questions
- Junior Engineer Interview Questions
- Service Engineer Interview Questions
- Mechanical Engineer Interview Questions
- Maintenance Engineer Interview Questions
- Graduate Engineer Interview Questions
- Show more
Overall Interview Experience Rating
based on 4 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Cummins Diploma Trainee Engineer Reviews and Ratings
based on 256 reviews
Rating in categories
|
Junior Shop Manager
1.4k
salaries
|  ₹3.6 L/yr - ₹9.6 L/yr |
|
Junior Manager
897
salaries
| ₹5 L/yr - ₹11 L/yr |
|
Diploma Trainee Engineer
461
salaries
| ₹1.5 L/yr - ₹3 L/yr |
|
Design Engineer
339
salaries
| ₹2.5 L/yr - ₹7.6 L/yr |
|
Service Engineer
275
salaries
| ₹2.6 L/yr - ₹7.8 L/yr |
John Deere
ABB
CNH ( Case New Holland)
KONE
- Home >
- Interviews >
- Cummins Interview Questions >
- Cummins Interview Questions for Fresher
