20+ IntouchCX Interview Questions and Answers

1st angle and 3rd angle projection are two methods of representing a 3D object on a 2D surface.

• In 1st angle projection, the object is placed in front of the viewing plane and the views are taken from behind the object.

• In 3rd angle projection, the object is placed behind the viewing plane and the views are taken from in front of the object.

• 1st angle projection is commonly used in Europe and Asia, while 3rd angle projection is commonly used in North America.

• The symbol for 1st a...read more

To draw front, top and side view of a drawing, follow these steps.

• Start by drawing the front view, which shows the object as it appears from the front.

• Next, draw the top view, which shows the object as it appears from above.

• Finally, draw the side view, which shows the object as it appears from the side.

• Make sure to label each view with the appropriate dimensions and angles.

• Use a ruler and protractor to ensure accuracy.

Counter weight is a weight used to balance or offset another weight.

• Counter weight is used to balance or offset another weight.

• It is commonly used in machinery and equipment to prevent imbalance.

• Examples include elevator counterweights, crane counterweights, and flywheel counterweights.

• Counter weights can be made of various materials such as concrete, steel, or lead.

• They are often designed to be easily adjustable or removable for maintenance purposes.

The method of controlling an element depends on the specific element and the context in which it is increasing.

• Identify the element and its source

• Determine the potential consequences of the increase

• Implement appropriate measures to reduce or eliminate the source of the increase

• Consider using technology or equipment to control the element

• Monitor the situation to ensure the element remains at a safe level

Section line is used to show the shape of an object in a section view, while centre line is used to indicate the center of a feature.

• Section line is a thick, solid line that is drawn at a right angle to the cutting plane line.

• Centre line is a thin, long, dashed line that is used to indicate the center of a feature.

• Section line is used to show the shape of an object in a section view, while centre line is used to indicate the center of a feature.

• Section line is used to indicat...read more

Graphite takes spherical shape in sg iron due to the presence of magnesium.

• Graphite in sg iron forms as nodules or spheres due to the addition of magnesium.

• Magnesium reacts with sulfur in the molten iron to form magnesium sulfide, which promotes the formation of spherical graphite.

• The spherical shape of graphite in sg iron improves the material's mechanical properties, such as strength and ductility.

The 5 core tools of Quality are essential techniques used in quality management to ensure products and processes meet standards.

• 1. Process Flowcharts: Used to visually represent the steps in a process.

• 2. Cause and Effect Diagrams (Fishbone Diagrams): Used to identify and analyze potential causes of a problem.

• 3. Control Charts: Used to monitor process variation over time.

• 4. Check Sheets: Used to collect and analyze data in a systematic way.

• 5. Pareto Charts: Used to prioritize ...read more

Casting defects are imperfections that occur during the casting process.

• Porosity

• Shrinkage

• Cracks

• Inclusions

• Misruns

• Cold shuts

• Warping

• Shifts

• Blowholes

Handle customer complaints by listening, empathizing, investigating, resolving, and following up.

• Listen to the customer's complaint without interrupting

• Empathize with the customer's situation and show understanding

• Investigate the root cause of the complaint to prevent future occurrences

• Resolve the issue promptly and effectively

• Follow up with the customer to ensure satisfaction and prevent recurrence

Charge mix is made by combining various raw materials in specific proportions to achieve desired chemical composition.

• Determine the required chemical composition of the final product

• Select appropriate raw materials based on their chemical properties

• Calculate the required quantities of each raw material based on their chemical composition and desired final product composition

• Mix the raw materials thoroughly to ensure homogeneity

• Perform quality control tests on the charge mix t...read more

To measure a part as per drawing, use appropriate measuring tools and follow the dimensions and tolerances specified in the drawing.

• Identify the part to be measured and its features

• Select the appropriate measuring tool (e.g. caliper, micrometer, gauge)

• Follow the dimensions and tolerances specified in the drawing

• Record the measurement accurately

• Compare the measurement to the drawing specifications to ensure it meets requirements

Furnace lining procedure involves selecting appropriate refractory materials and installing them in the furnace.

• Select appropriate refractory materials based on the type of furnace and operating conditions

• Prepare the surface of the furnace by cleaning and removing any old lining

• Install the refractory materials using various techniques such as casting, gunning, or ramming

• Allow the lining to dry and cure before firing up the furnace

• Regularly inspect and maintain the lining to e...read more

Container loading process involves several steps to ensure efficient and safe loading of goods.

• Inspect container for damage or cleanliness

• Prepare cargo for loading, ensuring proper packaging and labeling

• Use appropriate equipment like forklifts or cranes to load cargo into container

• Secure cargo inside container using straps or braces to prevent shifting during transit

• Complete necessary documentation and seal container before shipping

• Record container number and seal number for ...read more

The present mindset of a working Technical is focused on problem-solving, innovation, and continuous learning.

• Adapting to new technologies and tools

• Collaborating with team members to troubleshoot issues

• Staying updated on industry trends and best practices

• Seeking feedback to improve skills and performance

The 7 QC Tools are a set of basic tools used for quality control and problem-solving in manufacturing and other industries.

• Check sheet: Used to collect and analyze data in a systematic manner.

• Histogram: A visual representation of data distribution.

• Pareto chart: Helps identify the most significant factors contributing to a problem.

• Cause-and-effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.

• Scatter diagram: Shows the relationship betw...read more

GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.

• GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

• It helps ensure that parts fit together properly and function as intended.

• GD&T includes symbols, such as concentricity, flatness, perpendicularity, and position, to communicate design requirements.

• It is commonly used in indus...read more

To make a pattern, you need to take measurements, create a blueprint, cut the fabric, and sew the pieces together.

• Take accurate measurements of the body or object you are making the pattern for.

• Create a blueprint or sketch of the pattern design on paper or using a computer software.

• Transfer the blueprint onto the fabric and cut out the pieces according to the measurements.

• Sew the fabric pieces together following the blueprint to create the final pattern.