Add office photos
Filter interviews by
Crane Process Flow Technologies India Design Engineer Interview Questions and Answers
Crane Process Flow Technologies India Design Engineer Interview Experiences
2 interviews found
Omkar Pisal
(1 Question)
- Q1. Thumb rules for sheet metal design
- Ans.
Thumb rules for sheet metal design include minimum bend radius, hole spacing, and material thickness considerations.
Minimum bend radius should be at least equal to the material thickness to avoid cracking
Hole spacing should be at least 2 times the material thickness to prevent distortion
Material thickness should be chosen based on the application and required strength
Avoid sharp corners to reduce stress concentrations
U...
Overall or general review
Skills evaluated in this interview
Anonymous
Selected
I applied via Walk-in and was interviewed in Aug 2023. There was 1 interview round.
(1 Question)
- Q1. 1)Pressure Rating Standards 2) Stress strain,iron carbon diagrams 3) carbon percentage in all metals
Top trending discussions
Interview questions from similar companies
I was interviewed in Nov 2024.
(4 Questions)
- Q1. Wind calculation as per IS code
- Ans.
The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.
Determine the design wind speed based on the location and height of the structure.
Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.
Calculate the wind pressure using the formula provided in the IS code.
Consider fa...
- Q2. SFD and BMD of cantilever beam
- Q3. Staad model for fixed pole
- Ans.
A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.
In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.
The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.
The analysis helps in determining the s...
- Q4. Design of Square base plate
- Ans.
Key considerations in designing a square base plate
Ensure the base plate is large enough to support the load without excessive deflection
Select appropriate material and thickness to meet structural requirements
Consider the connection details for attaching the base plate to the structure
Account for any potential corrosion or environmental factors that may affect the base plate
Include provisions for anchor bolts or other...
Interview Preparation Tips
Selected
(2 Questions)
- Q1. Stress Strain curve
- Q2. IS codes related to steel structures
(5 Questions)
- Q1. What means the General tolerances
- Ans.
General tolerances refer to the acceptable range of variation in dimensions or properties of a part or product.
General tolerances are typically specified in engineering drawings to ensure parts fit and function properly.
They are usually expressed as a range of acceptable values, such as +/- 0.1mm.
Tolerances can vary depending on the specific requirements of the part or product.
Examples of general tolerances include dim...
- Q2. What is the material for wheel, Pin
- Ans.
The material for wheel is typically rubber or plastic, while the material for pin is usually metal such as steel or aluminum.
Wheel material is commonly rubber or plastic for flexibility and durability
Pin material is usually metal like steel or aluminum for strength and stability
- Q3. What are the grades of Hardwares like Screw, nut washer
- Ans.
Hardware grades are typically classified based on material composition, strength, and corrosion resistance.
Hardware grades are often denoted by a combination of letters and numbers, such as Grade 8.8 or Grade 316.
Higher grade numbers generally indicate a higher tensile strength or corrosion resistance.
Common grades for screws include Grade 2, Grade 5, and Grade 8, with Grade 8 being the strongest.
For nuts and washers, ...
- Q4. How to calculate motor power
- Ans.
Motor power can be calculated using the formula: Power (W) = Torque (Nm) x Speed (RPM) / 9.548
Calculate the torque required for the application
Determine the speed at which the motor will operate
Use the formula Power (W) = Torque (Nm) x Speed (RPM) / 9.548 to calculate motor power
- Q5. How welds are considered
- Ans.
Welds are critical in design engineering for joining metal components together.
Welds must be strong enough to withstand the intended load and stress.
Proper welding techniques and materials must be used to ensure the integrity of the weld.
Inspections and testing should be conducted to verify the quality of the weld.
Consideration should be given to factors such as joint design, welding process, and material compatibility...
Skills evaluated in this interview
I applied via Recruitment Consulltant
(1 Question)
- Q1. Understanding of drawing, Different standards, norms .
(2 Questions)
- Q1. Drawing reading
- Q2. Sensor details , connection types
(2 Questions)
- Q1. Salary discussion
- Q2. Joining period, negotiation
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before Feb 2023. There were 2 interview rounds.
Aptitude test is conducted by organization to know the problem solving ability of candidate.
(1 Question)
- Q1. What are the different types of connections in steel structures.
- Ans.
Different types of connections in steel structures include welded connections, bolted connections, and riveted connections.
Welded connections involve joining steel members by welding them together.
Bolted connections use bolts and nuts to connect steel members.
Riveted connections use rivets to connect steel members.
Other types of connections include pinned connections and moment-resisting connections.
Examples: Welded be...
Interview Preparation Tips
(2 Questions)
- Q1. Experience in software
- Ans.
Extensive experience in various software applications and programming languages.
Proficient in programming languages such as Java, Python, and C++
Experience with software development tools such as Git, JIRA, and Jenkins
Familiarity with database management systems such as MySQL and MongoDB
Experience with web development frameworks such as React and Angular
Ability to learn and adapt to new software quickly
- Q2. Technical knowledge and skills
Interview Preparation Tips
Skills evaluated in this interview
Selected
I applied via Recruitment Consulltant and was interviewed before Jun 2022. There were 5 interview rounds.
(1 Question)
- Q1. About your last company
Technical questions and job description
(1 Question)
- Q1. Test on different software
(1 Question)
- Q1. Salary discussion about ctc
Interview Preparation Tips
I applied via Job Portal and was interviewed before May 2020. There were 5 interview rounds.
Interview Questionnaire
2 Questions
- Q1. This interview was 100% technical and last for 2 hrs/each round. Total 2 rounds, second round was CAD test but in that also some questions were asked. Most of the questions were on “Basics of Mechanical En...
- Q2. CAD test will be there for sure. I was asked to create basic representation of gate valve using Autodesk Inventor. Also was asked to explain some of the features like extrude, revolve etc.
Interview Preparation Tips
Crane Process Flow Technologies India Interview FAQs
Tell us how to improve this page.
Crane Process Flow Technologies India Interviews By Designations
- Crane Process Flow Technologies India Design Engineer Interview Questions
- Crane Process Flow Technologies India Applications Engineer Interview Questions
- Crane Process Flow Technologies India Inside Sales Engineer Interview Questions
- Crane Process Flow Technologies India Lead Engineer Interview Questions
- Crane Process Flow Technologies India Manager HRD Interview Questions
- Crane Process Flow Technologies India Production Manager Interview Questions
- Crane Process Flow Technologies India Senior Design Engineer Interview Questions
- Crane Process Flow Technologies India Senior Mechanical Design Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Design Engineer Interview Questions
- Mechanical Engg. Design Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Piping Designer Interview Questions
- Trainee Design Engineer Interview Questions
- Show more
People are getting interviews through
Design Engineer Interview Questions from Similar Companies
Crane Process Flow Technologies India Design Engineer Reviews and Ratings
based on 11 reviews
Rating in categories
|
Senior Design Engineer
32
salaries
|  ₹5.7 L/yr - ₹13.7 L/yr |
|
Design Engineer
30
salaries
| ₹5 L/yr - ₹9.1 L/yr |
|
Senior Engineer Purchase
24
salaries
| ₹5.3 L/yr - ₹8.4 L/yr |
|
Inside Sales Engineer
14
salaries
| ₹4.5 L/yr - ₹8.2 L/yr |
|
Associate Project Lead
13
salaries
| ₹4 L/yr - ₹15.2 L/yr |
Forbes Marshall
Kirloskar Brothers
Ksb Pumps
Sulzer
Calculate your in-hand salary
- Home >
- Interviews >
- Crane Process Flow Technologies India Interview Questions >
- Crane Process Flow Technologies India Design Engineer Interview Questions
