Upload Button Icon Add office photos

Filter interviews by

Crane Process Flow Technologies India Production Manager Interview Questions and Answers

Updated 21 Aug 2023

Crane Process Flow Technologies India Production Manager Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

What is productivity

Round 3 - One-on-one 

(5 Questions)

  • Q1. Focus on Production
  • Q2. Monthly machine PM
  • Q3. Daily short meeting for discussion
  • Q4. Face to face problems discussion about machine
  • Q5. No break down and calculate machine OE

Interview Preparation Tips

Interview preparation tips for other job seekers - My strength and my experience knowledge

Interview questions from similar companies

Production Engineer Interview Questions & Answers

Trelleborg user image Yoganandha Janekunte

posted on 26 Sep 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Overall equipment effectiveness
  • Ans. 

    Overall equipment effectiveness (OEE) is a measure of how well a manufacturing process is performing.

    • OEE is calculated by multiplying availability, performance, and quality rates.

    • It helps identify areas for improvement in production processes.

    • Example: If a machine has an availability of 90%, performance of 95%, and quality of 98%, the OEE would be 83.7%.

  • Answered by AI
  • Q2. Product development
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Hr asked are looking new job
  • Ans. I'm asking yes I'm searching new job
  • Answered Anonymously
  • Q2. Salary details , like pata slip and bank statement

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical questions ,like manufacturer line , related to machine assembly and knowledge of tools and
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jun 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. About your last company
Round 3 - Group Discussion 

Technical questions and job description

Round 4 - Technical 

(1 Question)

  • Q1. Test on different software
Round 5 - HR 

(1 Question)

  • Q1. Salary discussion about ctc

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to be normal, don't hesitate to ask questions. You are not worker you are also a part of company so be normal and give interview, English is mandatory.
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
-

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Understanding of drawing, Different standards, norms .
Round 3 - Technical 

(2 Questions)

  • Q1. Drawing reading
  • Q2. Sensor details , connection types
Round 4 - HR 

(2 Questions)

  • Q1. Salary discussion
  • Q2. Joining period, negotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - Servo, inverter, plc , machine understanding
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Aptitude test is conducted by organization to know the problem solving ability of candidate.

Round 2 - Technical 

(1 Question)

  • Q1. What are the different types of connections in steel structures.
  • Ans. 

    Different types of connections in steel structures include welded connections, bolted connections, and riveted connections.

    • Welded connections involve joining steel members by welding them together.

    • Bolted connections use bolts and nuts to connect steel members.

    • Riveted connections use rivets to connect steel members.

    • Other types of connections include pinned connections and moment-resisting connections.

    • Examples: Welded be...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Skills matters more than experience.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Stress Strain curve
  • Q2. IS codes related to steel structures
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I appeared for an interview in Nov 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Wind calculation as per IS code
  • Ans. 

    The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.

    • Determine the design wind speed based on the location and height of the structure.

    • Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.

    • Calculate the wind pressure using the formula provided in the IS code.

    • Consider fa...

  • Answered by AI
  • Q2. SFD and BMD of cantilever beam
  • Q3. Staad model for fixed pole
  • Ans. 

    A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.

    • In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.

    • The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.

    • The analysis helps in determining the s...

  • Answered by AI
  • Q4. Design of Square base plate
  • Ans. 

    Key considerations in designing a square base plate

    • Ensure the base plate is large enough to support the load without excessive deflection

    • Select appropriate material and thickness to meet structural requirements

    • Consider the connection details for attaching the base plate to the structure

    • Account for any potential corrosion or environmental factors that may affect the base plate

    • Include provisions for anchor bolts or other...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare wind calculation & Steel design
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. What means the General tolerances
  • Ans. 

    General tolerances refer to the acceptable range of variation in dimensions or properties of a part or product.

    • General tolerances are typically specified in engineering drawings to ensure parts fit and function properly.

    • They are usually expressed as a range of acceptable values, such as +/- 0.1mm.

    • Tolerances can vary depending on the specific requirements of the part or product.

    • Examples of general tolerances include dim...

  • Answered by AI
  • Q2. What is the material for wheel, Pin
  • Ans. 

    The material for wheel is typically rubber or plastic, while the material for pin is usually metal such as steel or aluminum.

    • Wheel material is commonly rubber or plastic for flexibility and durability

    • Pin material is usually metal like steel or aluminum for strength and stability

  • Answered by AI
  • Q3. What are the grades of Hardwares like Screw, nut washer
  • Ans. 

    Hardware grades are typically classified based on material composition, strength, and corrosion resistance.

    • Hardware grades are often denoted by a combination of letters and numbers, such as Grade 8.8 or Grade 316.

    • Higher grade numbers generally indicate a higher tensile strength or corrosion resistance.

    • Common grades for screws include Grade 2, Grade 5, and Grade 8, with Grade 8 being the strongest.

    • For nuts and washers, ...

  • Answered by AI
  • Q4. How to calculate motor power
  • Ans. 

    Motor power can be calculated using the formula: Power (W) = Torque (Nm) x Speed (RPM) / 9.548

    • Calculate the torque required for the application

    • Determine the speed at which the motor will operate

    • Use the formula Power (W) = Torque (Nm) x Speed (RPM) / 9.548 to calculate motor power

  • Answered by AI
  • Q5. How welds are considered
  • Ans. 

    Welds are critical in design engineering for joining metal components together.

    • Welds must be strong enough to withstand the intended load and stress.

    • Proper welding techniques and materials must be used to ensure the integrity of the weld.

    • Inspections and testing should be conducted to verify the quality of the weld.

    • Consideration should be given to factors such as joint design, welding process, and material compatibility...

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Experience in software
  • Ans. 

    Extensive experience in various software applications and programming languages.

    • Proficient in programming languages such as Java, Python, and C++

    • Experience with software development tools such as Git, JIRA, and Jenkins

    • Familiarity with database management systems such as MySQL and MongoDB

    • Experience with web development frameworks such as React and Angular

    • Ability to learn and adapt to new software quickly

  • Answered by AI
  • Q2. Technical knowledge and skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice place to work and learn. Good opportunity for beginners

Skills evaluated in this interview

Crane Process Flow Technologies India Interview FAQs

How many rounds are there in Crane Process Flow Technologies India Production Manager interview?
Crane Process Flow Technologies India interview process usually has 3 rounds. The most common rounds in the Crane Process Flow Technologies India interview process are Resume Shortlist, Group Discussion and One-on-one Round.
What are the top questions asked in Crane Process Flow Technologies India Production Manager interview?

Some of the top questions asked at the Crane Process Flow Technologies India Production Manager interview -

  1. Face to face problems discussion about mach...read more
  2. No break down and calculate machine...read more
  3. Daily short meeting for discuss...read more

Tell us how to improve this page.

Crane Process Flow Technologies India Production Manager Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Toshiba Interview Questions
4.0
 • 28 Interviews
Trelleborg Interview Questions
4.0
 • 18 Interviews
Liebherr Interview Questions
3.9
 • 17 Interviews
Sidel Interview Questions
3.7
 • 11 Interviews
GEA Group Interview Questions
4.0
 • 10 Interviews
View all
Senior Design Engineer
37 salaries
unlock blur

₹5.6 L/yr - ₹13.7 L/yr

Design Engineer
31 salaries
unlock blur

₹5 L/yr - ₹9.1 L/yr

Senior Engineer Purchase
24 salaries
unlock blur

₹5.3 L/yr - ₹8.4 L/yr

Inside Sales Engineer
14 salaries
unlock blur

₹4.5 L/yr - ₹8.2 L/yr

Associate Project Lead
13 salaries
unlock blur

₹4 L/yr - ₹15.2 L/yr

Explore more salaries
Compare Crane Process Flow Technologies India with

Trelleborg

4.0
Compare

Toshiba

4.0
Compare

Bosch Power Tools

4.4
Compare

Mitsubishi Heavy Industries

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview