Upload Button Icon Add office photos

Trelleborg

Compare button icon Compare button icon Compare

Filter interviews by

Trelleborg Production Engineer Interview Questions and Answers

Updated 26 Sep 2024

Trelleborg Production Engineer Interview Experiences

1 interview found

Production Engineer Interview Questions & Answers

user image Yoganandha Janekunte

posted on 26 Sep 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Overall equipment effectiveness
  • Ans. 

    Overall equipment effectiveness (OEE) is a measure of how well a manufacturing process is performing.

    • OEE is calculated by multiplying availability, performance, and quality rates.

    • It helps identify areas for improvement in production processes.

    • Example: If a machine has an availability of 90%, performance of 95%, and quality of 98%, the OEE would be 83.7%.

  • Answered by AI
  • Q2. Product development

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed in Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About ac and dc and alternator working principle
Round 3 - HR 

(1 Question)

  • Q1. Generator working principle....
  • Ans. 

    Generators convert mechanical energy into electrical energy through electromagnetic induction.

    • Generators use a rotating magnetic field to induce an electrical current in a conductor.

    • The mechanical energy can come from various sources such as steam turbines, water turbines, or wind turbines.

    • The electrical output of a generator is determined by the strength of the magnetic field, the speed of rotation, and the number of ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep knowledge in rubber products... And if u are a maintenance engineer knowledge in electrical and plc systems
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Your process knowledge
  • Q2. Troubleshooting did you faced
  • Q3. Some logic based questions
  • Q4. Some questions on PLC
  • Q5. Questions based on yield and reliability

Interview Preparation Tips

Interview preparation tips for other job seekers - Have faith in your working experience.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. What is min by 5s
  • Ans. 

    Min by 5s means finding the minimum value among a set of numbers that are multiples of 5.

    • Identify all the numbers that are multiples of 5 in the given set.

    • Compare these numbers to find the smallest value.

    • The smallest number among the multiples of 5 is the min by 5s.

  • Answered by AI
  • Q2. What is cumpani rul
  • Ans. 

    Cumpani rul is a term used in production engineering to refer to company rules and regulations.

    • Cumpani rul are guidelines set by the company to ensure smooth operations.

    • These rules may include safety protocols, quality standards, and production processes.

    • Employees are expected to adhere to cumpani rul to maintain efficiency and consistency in production.

    • Failure to follow cumpani rul may result in disciplinary action or...

  • Answered by AI
  • Q3. Diploma 2 sem.Subject
  • Q4. Practical college name University, maharastra
  • Q5. Which project was made?
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Manpower handling, production plan
Round 3 - One-on-one 

(3 Questions)

  • Q1. Manpower handling
  • Q2. About production planning
  • Q3. About production relatide document
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Walk-in and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. How can i achieve the hit target
  • Ans. 

    To achieve the hit target, focus on optimizing production processes, setting clear goals, and fostering a collaborative work environment.

    • Analyze current production processes and identify areas for improvement

    • Implement lean manufacturing principles to eliminate waste and increase efficiency

    • Set specific, measurable, attainable, relevant, and time-bound (SMART) goals

    • Regularly monitor progress towards the target and make a...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Material and TPM

I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Types of clutch?
  • Ans. 

    Clutches are devices used to transmit power from one component to another. There are several types of clutches.

    • Friction clutch

    • Electromagnetic clutch

    • Hydraulic clutch

    • Centrifugal clutch

    • Dog clutch

    • Cone clutch

    • Multi-plate clutch

  • Answered by AI
  • Q2. What is use of clutch?
  • Ans. 

    A clutch is a mechanical device that engages and disengages power transmission between two rotating shafts.

    • Clutches are commonly used in vehicles to allow the engine to start and stop without turning off the transmission.

    • They are also used in machines to control the power output and speed.

    • Clutches can be operated manually or automatically.

    • There are different types of clutches, including friction clutches, hydraulic clu...

  • Answered by AI
  • Q3. Personal interview?

Interview Preparation Tips

Interview preparation tips for other job seekers - You need no backlog subject after completing your engineering with better
Percentage in engineering and be prepare before any interview.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Part parameters,types of machine CNC bore grinding, OD grinding, turning process parameters
  • Q2. Part parameters, process parameters,

Interview Preparation Tips

Interview preparation tips for other job seekers - Xcc
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Naukri.com and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about your self.
  • Q2. All Basic question and just a discussion on current role and past role

Interview Preparation Tips

Interview preparation tips for other job seekers - read basics before interview
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is production policy?
  • Q2. What is kizen& 5s?

Interview Preparation Tips

Topics to prepare for John Deere Production Engineer interview:
  • assembly shop
Interview preparation tips for other job seekers - I needs to onroll job and you take the my interview and coming for ready new job

Trelleborg Interview FAQs

How many rounds are there in Trelleborg Production Engineer interview?
Trelleborg interview process usually has 1 rounds. The most common rounds in the Trelleborg interview process are Technical.
What are the top questions asked in Trelleborg Production Engineer interview?

Some of the top questions asked at the Trelleborg Production Engineer interview -

  1. Overall equipment effectiven...read more
  2. Product developm...read more

Tell us how to improve this page.

Trelleborg Production Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Trelleborg Production Engineer Salary
based on 6 salaries
₹4.5 L/yr - ₹7.5 L/yr
88% more than the average Production Engineer Salary in India
View more details
Assistant Engineer
250 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Trainee
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer Production
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Software Engineer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Trelleborg with

Continental

3.9
Compare

Freudenberg Group

3.6
Compare

Hutchinson

3.1
Compare

Eaton

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview