Upload Button Icon Add office photos

Filter interviews by

Clean Science And Technology Project Trainee Engineer Interview Questions, Process, and Tips

Updated 14 Jun 2024

Clean Science And Technology Project Trainee Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(7 Questions)

  • Q1. What are the types of pump
  • Ans. 

    Types of pumps include centrifugal pumps, positive displacement pumps, and axial flow pumps.

    • Centrifugal pumps: use a rotating impeller to increase the pressure of a fluid.

    • Positive displacement pumps: move fluid by trapping a fixed amount and forcing it through the discharge.

    • Axial flow pumps: move fluid parallel to the pump shaft.

    • Examples: Centrifugal pump - water pump, Positive displacement pump - diaphragm pump, Axial

  • Answered by AI
  • Q2. Classification Of material
  • Ans. 

    Classification of materials is the process of categorizing substances based on their properties and characteristics.

    • Materials can be classified based on their composition (e.g. metals, polymers, ceramics)

    • Materials can also be classified based on their properties (e.g. conductors, insulators, magnetic materials)

    • Classification helps in understanding the behavior and applications of different materials

  • Answered by AI
  • Q3. Classification of stress
  • Ans. 

    Stress can be classified as acute or chronic, eustress or distress, and as physical, mental, emotional, or environmental.

    • Acute vs. Chronic stress

    • Eustress vs. Distress

    • Physical, Mental, Emotional, Environmental stress

  • Answered by AI
  • Q4. What are a type of beam
  • Ans. 

    A type of beam is a structural element that carries load primarily in bending.

    • Types of beams include cantilever beams, simply supported beams, and fixed beams.

    • Beams can be made of materials such as wood, steel, concrete, or composite materials.

    • Beams are commonly used in construction to support roofs, floors, and bridges.

  • Answered by AI
  • Q5. Conversion of dimension
  • Ans. 

    Conversion of dimension involves changing the unit of measurement from one form to another.

    • Conversion factors are used to convert between different units of measurement.

    • Common conversions include inches to centimeters, feet to meters, and pounds to kilograms.

    • Remember to multiply or divide by the conversion factor to get the correct result.

  • Answered by AI
  • Q6. Classification of turbine
  • Ans. 

    Turbines can be classified based on various factors such as type, working fluid, and application.

    • Classification based on type: Impulse turbines and Reaction turbines

    • Classification based on working fluid: Steam turbines, Gas turbines, and Water turbines

    • Classification based on application: Power generation turbines, Marine turbines, and Aircraft turbines

  • Answered by AI
  • Q7. Classification of steel
  • Ans. 

    Steel can be classified based on its chemical composition, physical properties, and uses.

    • Classification based on chemical composition: carbon steel, alloy steel, stainless steel

    • Classification based on physical properties: high carbon steel, low carbon steel, high strength low alloy steel

    • Classification based on uses: structural steel, tool steel, stainless steel

    • Example: Carbon steel contains mainly carbon and iron, whil

  • Answered by AI

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical optimization cost savings
  • Ans. 

    Technical optimization cost savings refers to reducing expenses by improving technical processes.

    • Identify areas where technical optimization can be implemented

    • Analyze current processes and identify inefficiencies

    • Implement changes to improve efficiency and reduce costs

    • Examples include automating manual processes, optimizing server usage, and reducing energy consumption

    • Regularly review and update processes to ensure cont

  • Answered by AI
  • Q2. Technical optimization cost savings safety, process

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical, optimization, cost savings, time management SAP
Round 1 - Technical 

(1 Question)

  • Q1. Past experience, education, technical
Round 2 - HR 

(5 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why are you looking for a change?
  • Q5. Tell me about yourself.
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical , capacity, family

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well , take review, be soft

I applied via Naukri.com and was interviewed before Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Salary negotiation, joining
  • Q2. Structure design, optimization, costing, past experience etc.
  • Q3. Execution, billing, detailing etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical, joining time , timing, company policy etc
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Recruitment Consulltant and was interviewed before Dec 2019. There were 2 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Regarding ur experience
  • Q2. Maths calculation
Round 2 - One-on-one 

(1 Question)

  • Q1. Salary discussions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

Interview Questionnaire 

2 Questions

  • Q1. Sales
  • Q2. Expriance

Interview Preparation Tips

Interview preparation tips for other job seekers - Any way any time
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Sale's marketing, market development, market requirement and needed, build up business etc.

Round 2 - Technical 

(10 Questions)

  • Q1. Demand generation
  • Q2. Quality and assurance etc
  • Q3. Quality complaints
  • Q4. Order and sales
  • Q5. Target vs achievement
  • Q6. Problem resolving
  • Q7. Customer satisfaction
  • Q8. Need to customer
  • Q9. Healthy work performance
  • Q10. Time taken complete the work

Interview Preparation Tips

Interview preparation tips for other job seekers - Lead the team member and distributor dealers.

I applied via Naukri.com and was interviewed in Jun 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Last company what working will do
  • Q2. Dealer Handling
  • Q3. Scheem

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic information and positive thinking

I applied via Approached by Company and was interviewed before Oct 2021. There was 1 interview round.

Round 1 - Normal 

(3 Questions)

  • Q1. On cv base and previous company question
  • Q2. Tell me about yourself
  • Q3. About product and tds sheet

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be panic for interview in this company because safarish working in this company
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

Railway increased their ticket prices either it is platform ticket or travelling tickets.Are you in favor or unfavour.

Round 3 - One-on-one 

(1 Question)

  • Q1. How to sell the product. How you convince to customer that our brand is good rather than others
  • Ans. 

    To sell our product, we highlight its unique features, benefits, and superior quality compared to competitors.

    • Identify the customer's needs and preferences

    • Highlight the unique features and benefits of our product

    • Demonstrate the superior quality and reliability of our brand

    • Provide social proof and customer testimonials

    • Offer competitive pricing and promotions

    • Provide excellent customer service and after-sales support

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Believes on yourself nothing else and be confident during gd and personal interview.Give facial expression very smiley and don't show him that you are nervous because interviewer doesn't have a metal detector to check that you are nervous or not one and only your facial expression shows all the things that he or she want to catch..

Clean Science And Technology Interview FAQs

How many rounds are there in Clean Science And Technology Project Trainee Engineer interview?
Clean Science And Technology interview process usually has 1 rounds. The most common rounds in the Clean Science And Technology interview process are Technical.
What are the top questions asked in Clean Science And Technology Project Trainee Engineer interview?

Some of the top questions asked at the Clean Science And Technology Project Trainee Engineer interview -

  1. What are the types of p...read more
  2. What are a type of b...read more
  3. Classification Of mater...read more

Tell us how to improve this page.

Clean Science And Technology Project Trainee Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Chemist
106 salaries
unlock blur

₹1.5 L/yr - ₹3.4 L/yr

Production Chemist
46 salaries
unlock blur

₹1.2 L/yr - ₹3.5 L/yr

Production Officer
29 salaries
unlock blur

₹2 L/yr - ₹4.5 L/yr

Production Engineer
23 salaries
unlock blur

₹2 L/yr - ₹3.6 L/yr

Maintenance Engineer
20 salaries
unlock blur

₹2.3 L/yr - ₹3 L/yr

Explore more salaries
Compare Clean Science And Technology with

Sheenlac Paints

4.5
Compare

Deepak Fertilisers and Petrochemicals

3.9
Compare

Astral Adhesives

4.0
Compare

Laxmi Organic Industries

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview