Cashify Field Engineer Interview Questions and Answers

Q1. Maximum age limit is ?
Ans. 
There is no standard maximum age limit for Field Service Engineer positions.
• Maximum age limit varies depending on company policies and local regulations

• Some companies may have a maximum age limit for hiring due to retirement policies or physical demands of the job

• In some countries, age discrimination laws may prohibit setting a maximum age limit for job applicants
Answered by AI
Add your answer
Q2. Posting may Delhi or Faridabad in Haryana
Add your answer

Q1. Setting of Routing Clamp and how set the cable from dashboard to routing clamp and how to reflect any error code on dashboard.
Ans. 
Routing clamp is set to secure cables, cable is routed from dashboard to clamp, error codes are reflected on dashboard.
• Secure routing clamp to prevent movement of cables

• Route cable neatly from dashboard to routing clamp to avoid tangling or damage

• Monitor dashboard for any error codes or alerts

• Refer to user manual for specific instructions on interpreting error codes
Answered by AI
Add your answer
Q2. How to configure any new currency box for different currencies.
Ans. 
To configure a new currency box for different currencies, you need to access the settings menu and input the desired currencies.
• Access the settings menu on the currency box

• Select the option to add a new currency

• Input the currency code and denomination for each currency

• Save the changes and test the functionality with different currencies
Answered by AI
Add your answer
Q3. How to dischage the battery of Hamilton lock when you will not able to that lock because it will not accept the lock code ?
Ans. 
To discharge the battery of a Hamilton lock when unable to input the lock code, you can use a battery discharger tool.
• Use a battery discharger tool to drain the battery completely.

• Once the battery is discharged, it should reset the lock system.

• If the lock still does not accept the code after discharging the battery, contact technical support for further assistance.
Answered by AI
Add your answer
Q4. What you will do when card reader will not read the atm card?
Ans. 
If the card reader does not read the ATM card, I will first check for any visible damage on the card or reader, clean the card and try again, and if the issue persists, contact technical support for further assistance.
• Check for any visible damage on the card or card reader

• Clean the card and try again

• Contact technical support for further assistance
Answered by AI
Add your answer

Q1. Introduction abt myself
Add your answer
Q2. Questions related cv
Add your answer

Q1. Questions on electrical engineering
Add your answer
Q2. Describe Transmission line parameters
Ans. 
Transmission line parameters are characteristics that define the behavior of electrical signals traveling through a transmission line.
• Characteristics include resistance, inductance, capacitance, and conductance

• Resistance is the opposition to the flow of current

• Inductance is the ability to store energy in a magnetic field

• Capacitance is the ability to store energy in an electric field

• Conductance is the ability to conduct...read more
Answered by AI
Add your answer
Q3. Questions abt distribution system
Add your answer
Q4. Numerals on line parameters
Ans. 
Numerals on line parameters refer to numerical values used to define the characteristics of a line in a system.
• Numerals on line parameters are used to specify the impedance, length, capacitance, and other characteristics of a transmission line.

• These parameters are crucial for analyzing and designing communication systems, power distribution networks, and other infrastructure.

• Examples of line parameters include characte...read more
Answered by AI
Add your answer
Q5. Numerals on power factor
Ans. 
Power factor is a measure of how effectively electrical power is being converted into useful work output.
• Power factor is a ratio of real power to apparent power in an electrical system.

• It is represented by a number between 0 and 1, with 1 being ideal.

• A power factor of less than 1 indicates that some of the electrical power is being wasted.

• Improving power factor can reduce energy costs and increase efficiency.

• Power fact...read more
Answered by AI
Add your answer
Q6. Questions about scheme
Add your answer

Q1. Current work, ctc, interest,
Add your answer

Work, issues, problems, mistakes and how you rectify them

Q1. Field work, question related my field, engineering etc
Add your answer

Q1. About work for the company etc
Add your answer

There were 30 questions total
1. Aptitude- 15 questions
2. Technical- 15 questions


Aptitude was easy not so much hard to solve. Technical questions were basic numerical about the transformer, Power system which you might study in your college.

Q1. They asked me about the working principal of transformer, different testing perform on transformer, Some basic questions about switchyard.
Add your answer

Q1. What is your salary expectation. They offer me two location either Banda district or Kasganj district.
Add your answer

Q1. What is the 11 kv abc cable depth size?
Ans. 
The depth size of 11 kV ABC cable varies depending on the specific installation requirements.
• The depth size of 11 kV ABC cable is determined by factors such as soil conditions, local regulations, and installation method.

• It is important to consult engineering specifications and guidelines for the specific project to determine the appropriate depth size.

• In some cases, the depth size may be specified by the utility compan...read more
Answered by AI
Add your answer

What will be the turns ratio if a certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary winding?

Q1. What is the impact on phase angle when the frequency of the voltage applied to a series RC circuit is increased?
Ans. 
Phase angle decreases as frequency increases in a series RC circuit.
• As frequency increases, the capacitive reactance decreases, leading to a decrease in phase angle.

• At low frequencies, the capacitive reactance is high, causing a larger phase angle.

• At high frequencies, the capacitive reactance is low, resulting in a smaller phase angle.
Answered by AI
Add your answer
Q2. If the frequency of the voltage applied to a series RC circuit is increased, the phase angle decreases.
Ans. 
Yes, as the frequency of the voltage applied to a series RC circuit is increased, the phase angle decreases.
• Increasing frequency means the reactance of the capacitor decreases, leading to a decrease in the phase angle.

• At very high frequencies, the capacitor acts like a short circuit, causing the phase angle to approach zero.

• This phenomenon is important in AC circuits and signal processing applications.
Answered by AI
Add your answer

Q1. Introduction abt myself
Add your answer
Q2. Questions related cv
Add your answer

Q1. Questions on electrical engineering
Add your answer
Q2. Describe Transmission line parameters
Ans. 
Transmission line parameters are characteristics that define the behavior of electrical signals traveling through a transmission line.
• Characteristics include resistance, inductance, capacitance, and conductance

• Resistance is the opposition to the flow of current

• Inductance is the ability to store energy in a magnetic field

• Capacitance is the ability to store energy in an electric field

• Conductance is the ability to conduct...read more
Answered by AI
Add your answer
Q3. Questions abt distribution system
Add your answer
Q4. Numerals on line parameters
Ans. 
Numerals on line parameters refer to numerical values used to define the characteristics of a line in a system.
• Numerals on line parameters are used to specify the impedance, length, capacitance, and other characteristics of a transmission line.

• These parameters are crucial for analyzing and designing communication systems, power distribution networks, and other infrastructure.

• Examples of line parameters include characte...read more
Answered by AI
Add your answer
Q5. Numerals on power factor
Ans. 
Power factor is a measure of how effectively electrical power is being converted into useful work output.
• Power factor is a ratio of real power to apparent power in an electrical system.

• It is represented by a number between 0 and 1, with 1 being ideal.

• A power factor of less than 1 indicates that some of the electrical power is being wasted.

• Improving power factor can reduce energy costs and increase efficiency.

• Power fact...read more
Answered by AI
Add your answer
Q6. Questions about scheme
Add your answer