C.s.i Kalyani Multi Speciality Hospital Interview Questions and Answers

Q1. Information about previous work
Ans. Resume $Development QA ,warranty Dept, Vendor management, work
Answered Anonymously
View 1 more answer
Q2. What improvements have been made at work
Ans. Improvement of working machine in Simple way$improving quality and productivity
Answered Anonymously
View 2 more answers
Q3. If your target is 100in ship, what will you do if it becomes 90?
Ans. 
I would assess the situation to determine the cause of the deviation and take corrective actions to bring the target back to 100.
• Investigate the reason for the deviation from the target

• Identify any external factors affecting the target

• Implement corrective measures to bring the target back to 100

• Monitor the progress closely to ensure the target is achieved
Answered by AI
View 2 more answers
Q4. What do you want to do in the company
Ans. I want to develop and grow business in the company
Answered Anonymously
View 1 more answer
Q5. What to do if there is a defect in the product
Ans. 
If there is a defect in the product, it is important to identify the root cause, rectify the issue, and implement preventive measures.
• Identify the root cause of the defect through thorough analysis and testing

• Rectify the issue by repairing or replacing the defective parts

• Implement preventive measures to avoid similar defects in the future, such as improving quality control processes or training staff

• Communicate with re...read more
Answered by AI
View 1 more answer
Q6. What to do if the target is 100 in the shift and it becomes 90?
Ans. 
Investigate the root cause of the deviation and take corrective actions to ensure the target is met in future shifts.
• Analyze the production process to identify any bottlenecks or inefficiencies causing the deviation.

• Check if there were any machine breakdowns or maintenance issues affecting the production output.

• Review the raw material quality and availability to ensure they meet the required standards.

• Evaluate the perf...read more
Answered by AI
Add your answer
Q7. What to do if there is a defect in the product
Ans. 
If there is a defect in the product, it is important to identify the root cause, rectify the issue, and implement preventive measures.
• Identify the root cause of the defect through thorough analysis and investigation

• Rectify the issue by repairing or replacing the defective parts

• Implement preventive measures to ensure similar defects do not occur in the future

• Conduct quality checks and inspections at various stages of pr...read more
Answered by AI
Add your answer

Q1. Mold development
Add your answer

Q1. Package and family background
Add your answer

Q1. 1. Introduce yourself
Ans. 
I am a Senior Chemical Engineer with expertise in process optimization and project management.
• Over 10 years of experience in the chemical engineering field

• Proficient in designing and implementing process improvements

• Strong knowledge of safety regulations and environmental standards

• Managed multiple projects from conception to completion, resulting in cost savings and increased efficiency

• Collaborated with cross-functiona...read more
Answered by AI
Add your answer
Q2. 2. How to calculate the line size
Ans. 
Line size calculation depends on flow rate, fluid properties, and pressure drop.
• Determine the required flow rate

• Determine the fluid properties such as viscosity and density

• Calculate the pressure drop based on the length of the line and the fittings used

• Select a line size that can handle the required flow rate with an acceptable pressure drop

• Consider factors such as cost and space limitations

• Use industry standards and g...read more
Answered by AI
Add your answer
Q3. 3. Between Kerosene and water what will you observe while using the same pump
Ans. 
The pump will observe both kerosene and water being pumped together.
• The pump will not be able to differentiate between the two liquids

• Both liquids will be pumped together in the same flow

• The mixture of kerosene and water may cause issues in downstream processes

• Separation techniques such as gravity settling or centrifugation may be required to separate the two liquids
Answered by AI
Add your answer
Q4. 4. Between H2 and N2 say for 100 kg/hr more pressure drop will be observed
Ans. 
H2 will have more pressure drop than N2 for 100 kg/hr
• H2 has a smaller molecular size than N2

• Higher flow rate leads to higher pressure drop

• This phenomenon is commonly observed in gas pipelines
Answered by AI
Add your answer
Q5. 5. If you have to enhance flow by twice what and all to considered during pipe sizing
Ans. 
To enhance flow by twice, pipe diameter needs to be increased by factor of 1.19 and velocity needs to be reduced by half.
• Increase pipe diameter by factor of 1.19

• Reduce velocity by half

• Consider the fluid properties and pressure drop

• Ensure the pipe material can handle the increased flow

• Check for any potential blockages or obstructions in the pipeline
Answered by AI
Add your answer
Q6. 6. If distillation column pressure goes slightly up and there is no flooding will the seperation prove
Ans. 
Slight increase in distillation column pressure without flooding will not affect separation
• Slight increase in pressure does not cause flooding which is the main factor affecting separation

• Separation efficiency may decrease slightly but not significantly

• Factors like temperature, feed rate, and composition also affect separation
Answered by AI
Add your answer
Q7. 7. Why do you want relocate from your Home city to Gurgaon
Ans. 
I want to relocate from my home city to Gurgaon for better career opportunities and professional growth.
• Gurgaon offers a thriving job market with numerous opportunities for chemical engineers.

• The city is home to several multinational companies and industrial hubs, providing a conducive environment for career advancement.

• Gurgaon has a well-developed infrastructure and is known for its modern amenities, making it an attr...read more
Answered by AI
Add your answer
Q8. 8. Why do you want to change your job profile from Process operation engineer to Process design engineer and how will you encounter this challenge
Ans. 
I want to change my job profile from Process operation engineer to Process design engineer because I am interested in the creative and analytical aspects of designing processes.
• I have always been fascinated by the process of designing and optimizing chemical processes.

• I enjoy problem-solving and finding innovative solutions to improve efficiency and productivity.

• I believe that my experience as a Process operation engin...read more
Answered by AI
Add your answer

Q1. Cad drawing on Catia drawing with GD &T
Add your answer

Q1. What is Histrasis? What is viscosity?
Ans. 
Histrasis is the property of a material to resist change in shape or size under stress. Viscosity is the measure of a fluid's resistance to flow.
• Histrasis is important in materials science and engineering as it determines the strength and durability of materials.

• Viscosity is important in fluid mechanics and is measured in units such as poise or centipoise.

• Examples of high viscosity fluids include honey and molasses, wh...read more
Answered by AI
Add your answer

Simple and easy to attend.
Can crack if technically sound

Q1. It differs according to position
Add your answer
Q2. Tell about yourself. Technical questions
Add your answer

Q1. Not remember now to open the question
Add your answer
Q2. Tell about Qualification activities for HVAC.
Ans. 
Qualification activities for HVAC involve testing and verifying the performance of heating, ventilation, and air conditioning systems.
• Conducting functional tests to ensure proper operation of HVAC systems

• Performing air and water balancing to optimize system performance

• Verifying compliance with industry standards and regulations

• Documenting all testing and verification activities

• Training personnel on proper operation and
Answered by AI
Add your answer

Q1. Not remember that I had to tell now .
Add your answer

Q1. All hr related salary hike questions
Add your answer

Q1. Previous company job details?
Add your answer
Q2. Sales and marketing
Add your answer

Q1. 1. WHAT IS YOUR QUALIFICATION ,AND WAHER DO YOU WORK BEFORE NOW?
Add your answer
Q2. 2. DID YOU KNOW MS OFFICE SOFTWEAR?
Add your answer

Q1. 1. SORT THE DATA AS PER SALE?
Add your answer