Filter interviews by
I would immediately identify the source of the leak, contain it if possible, and report it to the appropriate personnel.
Identify the source of the leak to determine the severity and potential risks
Contain the leak using appropriate materials or procedures to prevent further damage
Report the leak to the relevant authorities or supervisors for further action
Follow any emergency response protocols or procedures in pl...
MSDS stands for Material Safety Data Sheet. It is important for providing information on the safe handling, storage, and disposal of hazardous chemicals.
MSDS provides detailed information on the properties of chemicals, potential hazards, and safety precautions.
It helps workers and emergency personnel to safely handle chemicals and respond to accidents or spills.
MSDS is required by law in many countries to ensure ...
Star delta is a method used to reduce the starting current of induction motors.
Star delta is a starting method for induction motors.
It involves connecting the motor windings in a star configuration during starting, then switching to a delta configuration once the motor is up to speed.
This method helps reduce the starting current and torque on the motor.
It is commonly used in industrial applications where high star...
Personal hygiene is important for general stewards. Life savings appliances are equipment used to save lives in emergency situations.
Personal hygiene includes regular hand washing, maintaining clean uniforms, and proper grooming.
Life savings appliances include life jackets, rescue boats, and fire extinguishers.
General stewards must be trained in the proper use and maintenance of life savings appliances.
Proper hygi...
The power of the main engine is a crucial factor in determining the performance of the vessel.
The power of the main engine is measured in horsepower (HP) or kilowatts (kW).
It determines the maximum speed the vessel can achieve.
It also affects the fuel consumption and efficiency of the vessel.
The power of the main engine should be sufficient to meet the operational requirements of the vessel.
For example, a cargo sh...
Turn off the hot plate and remove the pot from the heat source.
Turn off the hot plate immediately
Remove the pot from the heat source
Allow the pot to cool down before handling it
Use oven mitts or pot holders to handle the pot
Check for any damage to the pot or hot plate before using again
I applied via Job Portal
Need to deck cadet for interview
Need to test deck cadet for interview
Share discussion with my exemier
Need to test for deck cadet for interview
I appeared for an interview in May 2025, where I was asked the following questions.
My strength is adaptability, while my weakness is overthinking, which I continuously work to improve.
Strength: Adaptability - I quickly adjust to new environments and challenges, such as learning new navigation systems on board.
Weakness: Overthinking - I tend to analyze situations deeply, which can delay decision-making; I practice mindfulness to mitigate this.
Strength: Teamwork - I collaborate effectively with crew me...
I chose BSM for its strong reputation, comprehensive training, and commitment to developing skilled maritime professionals.
BSM has a long-standing history in maritime education, ensuring quality training.
The curriculum is designed to meet industry standards, preparing cadets for real-world challenges.
BSM offers hands-on training opportunities on various vessels, enhancing practical skills.
The network of alumni and indu...
I handle pressure by staying organized, maintaining a positive mindset, and using effective communication to navigate challenges.
Stay organized: I prioritize tasks and create checklists to manage workload effectively.
Maintain a positive mindset: I focus on solutions rather than problems, which helps reduce stress.
Effective communication: I keep open lines of communication with my team to address issues promptly.
Practic...
Deck cadets assist in navigation, maintenance, and safety operations on board ships, gaining practical experience in maritime duties.
Assist in navigation by taking bearings and maintaining logs.
Participate in watchkeeping duties, ensuring safety and security.
Help with the maintenance of deck equipment, such as lifeboats and mooring lines.
Conduct safety drills and emergency response training.
Learn about cargo operations...
COLREG stands for the International Regulations for Preventing Collisions at Sea, governing maritime navigation safety.
Established by the International Maritime Organization (IMO) in 1972.
Consists of 38 rules divided into 5 parts, covering navigation and conduct of vessels.
Examples include Rule 5: Look-out, which mandates vessels to maintain a proper lookout.
Rule 18 outlines responsibilities between vessels of differen...
MSDS stands for Material Safety Data Sheet. It is important for providing information on the safe handling, storage, and disposal of hazardous chemicals.
MSDS provides detailed information on the properties of chemicals, potential hazards, and safety precautions.
It helps workers and emergency personnel to safely handle chemicals and respond to accidents or spills.
MSDS is required by law in many countries to ensure workp...
I would immediately identify the source of the leak, contain it if possible, and report it to the appropriate personnel.
Identify the source of the leak to determine the severity and potential risks
Contain the leak using appropriate materials or procedures to prevent further damage
Report the leak to the relevant authorities or supervisors for further action
Follow any emergency response protocols or procedures in place
I appeared for an interview in May 2025, where I was asked the following questions.
My strength lies in my adaptability and strong problem-solving skills, which help me thrive in dynamic maritime environments.
Adaptability: I quickly adjust to changing conditions on board, such as weather or operational challenges.
Problem-solving: I effectively analyze situations and develop solutions, like optimizing cargo loading procedures.
Teamwork: I collaborate well with crew members, ensuring smooth operations an...
I tend to be overly detail-oriented, which can slow down my decision-making process at times.
I often spend extra time double-checking my work to ensure accuracy, which can delay project timelines.
For example, during my last internship, I took longer to complete reports because I wanted them to be perfect.
I am working on this by setting specific time limits for tasks to balance quality and efficiency.
Star delta is a method used to reduce the starting current of induction motors.
Star delta is a starting method for induction motors.
It involves connecting the motor windings in a star configuration during starting, then switching to a delta configuration once the motor is up to speed.
This method helps reduce the starting current and torque on the motor.
It is commonly used in industrial applications where high starting ...
I applied via Campus Placement and was interviewed in Nov 2023. There was 1 interview round.
My educational background includes a degree in Marine Engineering, focusing on naval architecture and marine systems.
Bachelor's degree in Marine Engineering from XYZ University, where I learned about ship design and propulsion systems.
Completed internships with ABC Shipping Company, gaining hands-on experience in ship maintenance and operations.
Participated in a research project on sustainable marine fuels, contributin...
I applied via Walk-in and was interviewed before Jul 2023. There were 3 interview rounds.
This on safety pollution environment and personal protective ads
Basically based on of yours colleagues and ship safety aspect and
Basic pcm test
I am a dedicated and enthusiastic individual with a passion for the maritime industry.
I have completed my maritime studies and obtained the necessary certifications.
I have practical experience on board ships during my training.
I am familiar with navigation systems and safety procedures.
I am a quick learner and have excellent problem-solving skills.
I am a team player and can work well under pressure.
Top trending discussions
based on 7 interview experiences
Difficulty level
Duration
based on 27 reviews
Rating in categories
Executive Accountant
5
salaries
| ₹3.8 L/yr - ₹5 L/yr |
Merchant Navy
5
salaries
| ₹1 L/yr - ₹6.5 L/yr |
Technical Superintendent
4
salaries
| ₹39 L/yr - ₹52 L/yr |
Mechanical Engineer
3
salaries
| ₹2.5 L/yr - ₹8 L/yr |
Second Engineer
3
salaries
| ₹20 L/yr - ₹40 L/yr |
Reliance Communications
Henry Harvin Education
GAO Tek
Tata Teleservices