Filter interviews by
Clear (1)
Top trending discussions
posted on 24 Jul 2021
Fuselage station refers to a specific location on an aircraft's fuselage.
Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.
It is used as a reference point for various components and systems on the aircraft.
For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.
Fuselage station 0 is usually defined as the refere...
Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.
Butt line is not a medical term.
It could refer to the line where the buttocks meet the thighs.
It is not a commonly used term and may have different interpretations depending on the context.
Water line refers to the pipe or tubing that carries water from the main supply to a building or property.
Water line is an essential component of a plumbing system.
It can be made of various materials such as copper, PVC, or galvanized steel.
The size of the water line depends on the water demand of the building or property.
Water lines can be underground or above ground.
A water line break or leak can cause significant da
The question is unclear and seems to contain errors.
The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.
Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.
Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.
Witho...
A rivet is a metal fastener used to join two or more pieces of material together permanently.
Rivets are commonly used in construction, automotive, and aerospace industries.
They are inserted into pre-drilled holes and then deformed to hold the materials together.
Rivets can be made of various materials including aluminum, steel, and copper.
They are often used in place of screws or bolts when a permanent joint is required...
The number of cutting angles in a reamer varies depending on the type and size of the reamer.
The number of cutting angles can range from 2 to 6.
The cutting angles are designed to remove material from the workpiece as the reamer rotates.
The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.
The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.
Exam...
Drill bits can have various cutting angles depending on their purpose and material.
The most common cutting angle for general purpose drill bits is 118 degrees.
Drill bits for harder materials like metal may have a sharper angle of 135 degrees.
Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.
The cutting angle affects the efficiency and precision of the drilling process.
Drill bits are made by various manufacturers using different materials and designs.
Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.
Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.
The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.
The number of cutting files depends on the project requirements and design complexity.
The number of cutting files can range from a few to hundreds or even thousands.
It also depends on the type of cutting machine being used.
For example, a laser cutting machine may require different files than a CNC router.
The number of cutting files can also vary based on the material being cut and its thickness.
It is important to have ...
I applied via Approached by Company and was interviewed before Jul 2022. There were 2 interview rounds.
I applied via Recruitment Consultant and was interviewed in Oct 2021. There was 1 interview round.
posted on 9 Sep 2022
I applied via Naukri.com and was interviewed before Sep 2021. There were 2 interview rounds.
posted on 9 Dec 2024
Tree algorithm about some riddels
DSA questions medium level
Projects are specific tasks or assignments that require a set of skills and resources to complete.
Projects are temporary in nature with a defined start and end date.
They typically have specific goals, deliverables, and constraints.
Projects require a team of individuals with different roles and responsibilities.
Examples: Developing a mobile app, implementing a new software system, conducting a research study.
There was simple aptitude questions along with some C snippet
RISC (Reduced Instruction Set Computing) has a smaller set of simple instructions, while CISC (Complex Instruction Set Computing) has a larger set of complex instructions.
RISC processors have simpler instructions that can be executed in a single clock cycle, making them faster.
CISC processors have more complex instructions that may require multiple clock cycles to execute.
RISC architectures typically have a smaller chi...
ADC converts analog signals into digital data by sampling the input signal at regular intervals.
ADC samples the input signal at regular intervals
It quantizes the sampled values into discrete digital values
The resolution of ADC determines the number of possible digital values
Common types of ADC include successive approximation ADC and delta-sigma ADC
I was interviewed before Sep 2020.
Round duration - 90 minutes
Round difficulty - Medium
It was in the afternoon. I have to switch on my webcam during test. 1 person taking the test and 3 people were monitoring me. they ask many questions apart from the test as well. He give me some situations and ask me to give solution for the problem by writing algorithm and code.
You are given an array/list of strings called inputStr
. Your task is to return the strings as groups of anagrams such that strings belonging to the same group are anagrams of ea...
Given an array of strings, group the strings that are anagrams of each other.
Iterate through the array of strings and sort each string alphabetically to create a key for grouping.
Use a hashmap to store the sorted string as key and the list of anagrams as value.
Return the values of the hashmap as the grouped anagrams.
Round duration - 90 minutes
Round difficulty - Medium
It was in the evening. I have to switch on my webcam during test. 1 person taking the test and 3 people were monitoring me. They asked many questions apart from the test as well.
Round duration - 30 minutes
Round difficulty - Medium
It was in the evening. There was total 3 persons in the meeting. They asked me many questions regarding my projects and my previous experience too. The interviewer were very friendly.
Round duration - 90 minutes
Round difficulty - Medium
It was in the morning. It was a one to one conversation. He asked me questions regarding my lifestyle, interests and work experience too. He asked me to tell me about myself for about 5 minutes. Then we talk a lot about current affairs too. Then we talked about package too. The interviewer was very nice and friendly in nature.
Tip 1 : You should know each and everything about your current project and your role and responsibilities.
Tip 2 : Continue practice on online coding platforms and do participate in coding challenges.
Tip 3 : Study everyday complete online courses on platform like Udemy.
Tip 1: Add only what you know properly. don't add extra stuff just to add weight to your resume.
Tip 2: First page of the resume must in tabular form and it must give complete information about you in very simple manner.
Tip 3: Make it short and direct.
based on 1 interview
Interview experience
Programmer Analyst
337
salaries
| ₹0 L/yr - ₹0 L/yr |
Software Engineer
268
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Software Engineer
146
salaries
| ₹0 L/yr - ₹0 L/yr |
Software Developer
141
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Software Engineer
119
salaries
| ₹0 L/yr - ₹0 L/yr |
AIRBUS
Tata Lockheed Martin Aerostructures
Northrop Grumman
Raytheon