Upload Button Icon Add office photos

Boeing

Compare button icon Compare button icon Compare

Filter interviews by

Boeing Associate Interview Questions and Answers

Updated 2 May 2021

Boeing Associate Interview Experiences

1 interview found

Associate Interview Questions & Answers

user image Anonymous

posted on 2 May 2021

I was interviewed in Nov 2020.

Interview Questionnaire 

1 Question

  • Q1. Job profile Question. Managerial skill question. Basic Engineering question.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic engineering concept.
Application software know how knowledge.

Interview questions from similar companies

Interview Questionnaire 

12 Questions

  • Q1. What is fuselage station
  • Ans. 

    Fuselage station refers to a specific location on an aircraft's fuselage.

    • Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.

    • It is used as a reference point for various components and systems on the aircraft.

    • For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.

    • Fuselage station 0 is usually defined as the refere...

  • Answered by AI
  • Q2. What is butt line
  • Ans. 

    Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.

    • Butt line is not a medical term.

    • It could refer to the line where the buttocks meet the thighs.

    • It is not a commonly used term and may have different interpretations depending on the context.

  • Answered by AI
  • Q3. What is water line
  • Ans. 

    Water line refers to the pipe or tubing that carries water from the main supply to a building or property.

    • Water line is an essential component of a plumbing system.

    • It can be made of various materials such as copper, PVC, or galvanized steel.

    • The size of the water line depends on the water demand of the building or property.

    • Water lines can be underground or above ground.

    • A water line break or leak can cause significant da

  • Answered by AI
  • Q4. Cutting tools
  • Q5. Drill bit sizes
  • Q6. In drawing what is fast angel What is thired ange projection
  • Ans. 

    The question is unclear and seems to contain errors.

    • The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.

    • Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.

    • Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.

    • Witho...

  • Answered by AI
  • Q7. What is the meaning of rivet how will it work
  • Ans. 

    A rivet is a metal fastener used to join two or more pieces of material together permanently.

    • Rivets are commonly used in construction, automotive, and aerospace industries.

    • They are inserted into pre-drilled holes and then deformed to hold the materials together.

    • Rivets can be made of various materials including aluminum, steel, and copper.

    • They are often used in place of screws or bolts when a permanent joint is required...

  • Answered by AI
  • Q8. General drill bit angel
  • Q9. How many cutting angels in reamer
  • Ans. 

    The number of cutting angles in a reamer varies depending on the type and size of the reamer.

    • The number of cutting angles can range from 2 to 6.

    • The cutting angles are designed to remove material from the workpiece as the reamer rotates.

    • The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.

    • The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.

    • Exam...

  • Answered by AI
  • Q10. How many cutting angle in drill bit
  • Ans. 

    Drill bits can have various cutting angles depending on their purpose and material.

    • The most common cutting angle for general purpose drill bits is 118 degrees.

    • Drill bits for harder materials like metal may have a sharper angle of 135 degrees.

    • Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.

    • The cutting angle affects the efficiency and precision of the drilling process.

  • Answered by AI
  • Q11. Drill bit made by
  • Ans. 

    Drill bits are made by various manufacturers using different materials and designs.

    • Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.

    • Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.

    • The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.

  • Answered by AI
  • Q12. How many cutting files
  • Ans. 

    The number of cutting files depends on the project requirements and design complexity.

    • The number of cutting files can range from a few to hundreds or even thousands.

    • It also depends on the type of cutting machine being used.

    • For example, a laser cutting machine may require different files than a CNC router.

    • The number of cutting files can also vary based on the material being cut and its thickness.

    • It is important to have ...

  • Answered by AI

I applied via Campus Placement and was interviewed in Dec 2016. There were 7 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. They asked about my experience
  • Q2. Gave a diagram and asked to identify a specific part of engine
  • Q3. Asked about what I learned rather than what they wanted and they'll identify whether we have what they want. An excellent selection process!!
  • Q4. Strength and weakness,
  • Q5. Introduction

Interview Preparation Tips

Round: Resume Shortlist
Experience: shortlisting of resumes
Tips: job experience is an advantage, I hope.

Round: Test
Experience: thermal, design questions...need to know basic knowledge
Duration: 30 minutes
Total Questions: 30

Round: Test
Experience: Quick interpretation of relevant data from a pool of data
Duration: 30 minutes
Total Questions: 30

Round: Problem Statement
Experience: You'll be given a A3 sheet and a marker pen. Then you will be asked to write your qualities to market yourselves. They'll test everything in you. So be careful about choosing your qualities to present.

Round: Technical Interview
Experience: I did pretty well, highlighted my job experience. It all depends on what you present to them and how you impress them with that. Be careful, you should sell them what they want.

Round: HR Interview
Experience: A thorough examination of one's personality. Please disguise your strength as weakness and sell.

Skills: Technical Skill, Data Interpretation, HR Skills, Work Experience, Presence Of Mind, relieving pressure
College Name: iit madras
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Are you willing to relocate?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident! Confidence goes a long way. Also, be honest. If you don’t know the answer, admit that you don’t but express the want to learn more and commit to being a sponge.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jul 2022. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Knowledge about IC engine
Round 2 - One-on-one 

(1 Question)

  • Q1. Value engineering related questions
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Dec 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. What are your goals
  • Ans. 

    My professional goal is to become a certified System Engineer and work on complex projects that challenge me to continuously learn and grow.

    • Obtain certification as a System Engineer

    • Work on complex projects to enhance skills

    • Continuously learn and grow in the field

    • Seek opportunities for advancement and leadership roles

  • Answered by AI
  • Q2. Experience with system eng orocess
  • Ans. 

    I have extensive experience with system engineering processes in various industries.

    • Led cross-functional teams to design and implement complex systems

    • Utilized tools such as requirements management software and system modeling tools

    • Performed system integration and testing to ensure functionality and performance

    • Collaborated with stakeholders to gather and analyze requirements

    • Implemented system engineering best practices

  • Answered by AI
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Referral and was interviewed in Sep 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Technical and coding

Round 3 - Technical 

(1 Question)

  • Q1. Technical questions
Round 4 - HR 

(1 Question)

  • Q1. Salary negotiations

Interview Questionnaire 

1 Question

  • Q1. Basic avionic domain questions

I applied via Recruitment Consultant and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. SAP abap and ui5 questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Core knowledge of ABAP and UI5
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Coding Test 

Tree algorithm about some riddels

Interview Preparation Tips

Interview preparation tips for other job seekers - tree algorithm

Boeing Interview FAQs

How to prepare for Boeing Associate interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Boeing. The most common topics and skills that interviewers at Boeing expect are Javascript, HTML, .Net, C# and JQuery.

Tell us how to improve this page.

Interview Questions from Similar Companies

Air India Interview Questions
3.7
 • 150 Interviews
Spicejet Interview Questions
3.6
 • 86 Interviews
AIRBUS Interview Questions
3.7
 • 70 Interviews
Qatar Airways Interview Questions
3.9
 • 55 Interviews
Go First Interview Questions
3.7
 • 46 Interviews
Thales Interview Questions
3.6
 • 45 Interviews
View all
Boeing Associate Salary
based on 8 salaries
₹12.5 L/yr - ₹27.5 L/yr
115% more than the average Associate Salary in India
View more details

Boeing Associate Reviews and Ratings

based on 2 reviews

2.5/5

Rating in categories

2.5

Skill development

2.5

Work-life balance

3.1

Salary

2.5

Job security

2.5

Company culture

2.5

Promotions

2.5

Work satisfaction

Explore 2 Reviews and Ratings
Programmer Analyst
337 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Engineer
268 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Software Engineer
146 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Developer
141 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Software Engineer
119 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Boeing with

AIRBUS

3.7
Compare

Tata Lockheed Martin Aerostructures

3.8
Compare

Northrop Grumman

4.1
Compare

Raytheon

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview