Bmm Ispat Graduate Engineer Trainee (Get) Interview Questions and Answers

Round: Resume Shortlist
Experience: The resume is more than just mere personal information form – it should give a complete picture about the candidate since it is the first impression the interviewer gets about you.I wanted to get recruited in a core sector company. I wanted to work in a company related to power sector consequently I designed my resume accordingly.
Tips: Do not lie. In case if you fail to respond to questions asked from the points that you mentioned in your resume you might squander your chances of getting recruited to the company. Hence be truthful when you mention anything in your resume, at the same time be concise and precise because the interviewer cannot spend a lot of time on a single resume.

Round: Test
Experience: First I contacted some of my seniors who were working with the company. It is from them that I learnt that a lot of questions from power system protection are asked in the written test. In general if you search the internet about the type of questions asked in these tests you might get some awry information. The main reason being that the same company might turn up in different colleges with different profiles consequently the questions asked in their tests might vary from college to college; hence in order to avoid such discrepancy it is always suggested to consult some of the seniors.
The company conducted a technical written test. The questions were majorly from control systems and further from PID (Proportional Integral Differential) control systems. There were also some basic electrostatic questions. Few questions were also asked from power and machining, though we were expecting a higher proportion of power related questions. The company had come to the campus to recruit for their steel unit and power unit, consequently knowledge on control system and power was a must.
The test was an objective online test – but it was not an elimination test.
Tips: A candidate appearing for this company’s written test should have good level of knowledge in control systems and power.

Round: Group Discussion
Experience: I along with my friends practised for the GD. We would conduct the mock GD amongst ourselves.The GD topic that was allotted to my group during the GD round was FDI in retail. The topics allotted to other groups were on cricket and the ongoing (at that time) Anna Hazare movement. The GD was again not an elimination round.

Round: HR Interview
Experience: The first interview was conducted by an alumnus of our institute. He began by asking me for a brief introduction. He wanted a brief reply. Then he enquired about my 3rd year internships. I had done my internship as a project manager in L&T power. The work that I did there was based on how an idea or a concept is translated into reality. He asked me to explain the kind of work that I did there and why I chose that internship. He also asked me to explain the SLD of a power plant. SLD stands for a single line diagram and is drawn for study of huge power plants and refineries. An SLD is analogous to the electronic diagrams drawn to study electronic circuits. He was surprised at how much I managed to learn from the internship that lasted for duration of only two months. I replied that the underlying principle behind whatever I learnt there was the concept of “relaying” which I was quite proficient in.
Next he started asking me questions that I had not anticipated. He asked me to explain the differences that I thought existed between the kinds of work that I did in L&T and the work I would be expected to do in Jindal steel. I replied to it by explaining the differences in the kind of business the two companies did.
He enquired whether I had questions to ask. Generally people tend to ask some crappy questions like ‘What is the growth of the company?’ and the likes, but i earnestly suggest that if you have attended the PPT then ask some questions from the points mentioned during the PPT which showcases your attentiveness as well as genuine interest in the company’s work. During the PPT I had learnt that the PLF (Plant Load Factor) of the company is very high I asked him to explain me the reason for this this; also the company had a huge ongoing project in Orissa I asked him about the future plans of the company in Orissa and the problems that the company is facing with respect to the development of a current project. I asked these questions to show him my level of interest in the company and also that i was attentive during the PPT.
Then he moved over to my 2nd year projects. I did my 2nd year internship in NDPL (North Delhi Power Limited). He asked me to explain the kind of work I did in this internship. Power companies are generally involved in one of the 3 businesses: generation, transmission or distribution. NDPL is involved in distribution of power. I told him that the project i worked on was minimization of harmonics in distribution system. He asked me explain the reason for these harmonics in the distribution system which is a major headache in such companies. I told him that the non-linear loads like the refrigerators and air conditioners were the major cause of such harmonics. Next i told him the measures that were adopted by NDPL for control of harmonics.
He then moved over to the minor project that i did. The project was a simple one and this aroused his amazement. I explained that the project was allotted only 2 credits and also told him that through the project i learnt the usage and properties of various components like capacitors, resistors and the likes. He was convinced with my reply.
Important Tip: I would recommend that one should do a thorough research on the kind of business of the company in which one did his internship in  or is applying for a job because it is very essential to know the place where one did his internship in and where one is going to go to.

Round: HR Interview
Experience: This interview was supposed to be an HR interview but the interviewer eventually drifted over to technical aspects. He guessed that since I had done all my internships in the past in  power sectors my area of interest would be power and also since the company had very little to do in power sector and more in the mining sector I would have to go a through a new beginning all together. I explained him that the internship I did was not about power generation or distribution, but was about protection and relaying; I told him I did the work that a maintenance engineer would do. He was convinced that the power industries do indeed possess a wider scope.
He asked me about my birth place and also enquired about my family background.
He then asked me to explain my major project. I told him that we were supposed to do our major project in the next semester. However, I still gave him a brief idea about my major project. I told him about the future prospects about my project and also the kind of difficulties that I was likely to face. He asked me some basic questions pertaining to the project which I managed to answer quite easily.
I had also mentioned photography as my area of interest. He asked me to explain the specifications of the camera used in the photography section in the hobbies club.
He lastly asked me to specify that if given an option to work either in a well-established company or in a growing company  where work would be more but incentives would be less then where would I prefer to work. I replied that I would be prefer working in a growing company like Jindal steel because that would enable me to learn more and also deal with newer technologies because in established companies still obsolete technologies are used.
Tips: I would suggest that one should never refer any website for framing answers to HR questions. You have to speak about yourself only and frame your answers after giving a detailed thought to your abilities/strengths/goals etc. Also it might prove to be beneficial to consult some seniors who has been working in the same company or has some experience with HR interviews.

College Name: IIT ROORKEE
Motivation: Jindal Steel is a very reputed company and the main source of information was the pre placement talk given by the company.

Round: Test
Experience: The written round consisted of aptitude questions, mainly from verbal ability and logical reasoning with some questions also from quantitative ability section. The questions were easy to solve and the time allotted was sufficient. There were no negative marking and I could easily attempt all the questions and was one of the top scorers of this round. Since this was a pen and paper round, one can attempt the questions in any order.
Tips: Be prepared with general aptitude from well beforehand. Practice as much as you can to have an edge over others. Try to attempt all the questions. It is an elimination round. So, good luck.
Duration: 60 minutes
Total Questions: 80

Round: Technical Interview
Experience: Since I was one of the top scorers of the aptitude round, I was the second person to go in for the interview. Even though it was a technical round, I was not asked questions from my domain (metallurgical & materials engineering), rather they asked me general HR questions. I could answer all of them with valid reasons.
Tips: Be well prepared with at least one subject from your domain. Other candidates were asked questions from their subjects. Be prepared with our summer internship project and whatever you stated in your CV. They interviewers are experienced people, so never try to show your over-smartness in front of them. This is not an elimination round.

Round: HR Interview
Experience: Immediately after the technical interview, I was summoned from another round of HR interview in another room. Being a girl, they asked me whether I would be able to work in a steel plant in harsh conditions. I had prepared for this answer from beforehand, so I could convince them well for hiring me. They asked me about my strengths and weaknesses. Other general HR questions were also asked which I had already faced in the previous round.
Tips: Be prepared with general HR questions and be confident while stating your facts. Don't get nervous as it may lead to your rejection. This is the final round. So, good luck.

General Tips: I have shared all the tips in the previous answers. So follow them and you can get hired easily. Never get nervous and don't be over-confident as both show negativity.
Skill Tips: All the 3 skills are required for acing any interview. So, develop these as much as you can.
Skills: Aptitude, Critical thinking, Domain knowledge, reasoning ability
College Name: NIT DURGAPUR
Motivation: Being a Metallurgical and Materials engineer, JSL is one of the dream companies which visit for campus recruitment.

Round: Test
Experience: Pure technical.
Study Physical Metallurgy and mechanical metallurgy... as well as Iron and Steel Making.
Duration: 60 minutes
Total Questions: 50

Round: Group Discussion
Experience: It is better to start gd. Give a good start. Whatever you speak, be confident and be loud. You should be very active during gd. Giving chance to the person who is silent throughout the gd will increase your point.

Round: Technical Interview
Experience: Question asked :
Name, position in class, project(industrial), about parents.
Corex process, Difference between corex and BF, Supply of O2 in Corex etc...
BF operations, RAFT, Temp. difference between slag and hot metal and reason for that difference, position of tuyers in bf and justify its position.
Types of steel in LD converter, Quenching medium and best quenchant.
Type of work you wish to do. How long you wish to work for this company, planning for further studies or not ..

General Tips: CPI is the most important thing. Along with CPI they also check weather the interviewee is having knowledge of basic things or not. In short CPI and knowledge both matters alot.
Skill Tips: Whatever you speak be confident in that. You should have very sound technical knowledge. Show interviewers that you are desperate to join their company. Sit straight and be bold and have confidence on yourself.
College Name: NIT RAIPUR

Round: Test
Experience: Average level of difficulty.
Tips: Study mechanical and physical metallurgy as well as iron and steel making properly.
Duration: 60 minutes
Total Questions: 50

Round: Group Discussion
Experience: There were 12 candidates in my GD group including me so you need to speak enough over the topic and you need to show some good GD atticates which will work in your favour.

Round: Technical Interview
Experience: My PI consisted many ups and downs I.e. Silence of half an hour and then continuous speaking of about 20 min. As it was a kind of group interview but the questions were asked to individual and questions were not passed to the other candidate I.e. It was 3(HR) on 1 interview but two other candidates were also listening your interview.
Tips: My interview was based only on my industrial project and nothing else. Just know your project very well do it very seriously so that you are answerable to each and every question that will be bombarded over you!!!
And discover your passion till fourth year and accordingly choose the company. Do not experiment with your life and if confused talk to your seniors.

General Tips: The most important thing which matters is how passionate and how eager you are to work with them. Also most important is positive attitude towards every problem.
Skill Tips: If you ask any senior about cpi and if he says that it doesn't matter then he is definitely misguiding you!!!! Weightage of cpi and your technical is equal. If he says make your technical sound and you will be selected then it happens very rarely at least in our college. They want to see your performance in your academic session. They want to see how consistant you will be in their company and how serious you are towards your work and also towards your career. Less cpi even if you are constant through out, tells them that you will not grow after some point of time so they want growing and consistently growing performance which help them in their company. And backlog history matters more then your cpi because companies are nowadays asking for no backlog history so if you are not eligible for company then to whom you will show your pointers???
Skills: CGPA, Eagerness to work, Positive attitude
College Name: NIT RAIPUR

Round: Resume Shortlist
Experience: I used a single resume for all the companies that I applied to. I mentioned my extra-curricular activities and my projects with the projects relevant to the profile on offer getting a higher priority.

Round: Test
Experience: The first round In Jindal Steel and Power Limited was a written test. The test was a completely technical paper, there were no aptitude questions asked in the test. Questions were asked from fluid machinery, stresses in beams, heat and mass transfer, manufacturing techniques and material properties. The duration of the test was 60 minutes and the numbers of questions asked were also 60. In total, 11 candidates were shortlisted for the Interview round.
For the technical questions I studied topics like fluid machinery and IC engines.

Round: HR Interview
Experience: For the HR Interviews I prepared sample answers to some questions like:Tell me about yourself.
What are career goals (both short term and long term)?Before asking me any technical questions the Interviewers asked me to specify my areas of Interest, I said fluid machinery and IC engines. They began by asking me questions from fluid machinery ‘What Is the difference between a reaction turbine and a repulsive turbine?’ I specified some basic difference. Next they asked me to specify the differences between the principles of operation of the two turbines. I managed to answer this question as well. From IC engines they asked me to specify the reason for the occurrence of knocking In IC engines.

Further they ventured out of my areas of Interest and asked me questions like ‘Why Is fatigue test done?’  They also asked me questions from material properties; I bluntly replied that material properties are not in my area of Interest.
They asked some questions from my resume as well. In my resume I had mentioned about some of my projects, these projects were related to railways. They asked me about my experience that I gained while working on these projects. Based on these they also asked me questions on lathe machines; these are the topics that I had studied in the second year of my course.
The company recruited 3 students from mechanical department.

College Name: IIT ROORKEE

Round: Test
Experience: APTI PLUS TECHNICAL PLUS GK

Round: Technical Interview
Experience: Technical Interview



In my interview,they asked:Why all the lights were lit and fans were on just for 2 persons.I said its for you Sir.Whenever any person comes to our home it is our duty to make him comfortable and happy because mehmaan bhagwan hota h and also I said that it is not correct to waste energy and I switched off the lights and fans.



1.My subject was heat treatment(specialization)



2.They asked about hadfield steel,cct,ttt,annealing ,normalizing,tempering,cooling curves,why bainite not formed in cct



3.You should remain cool,calm and composed.



4.You should be spontaneous in your answers.



5. Be concise and clear.



6.Always tell the truth .If you don’t know the answer to any question simply admit it don’t stretch it.You can give the direction to the answer if you don’t know it fully.



7.Prepare training and project with full accuracy.
Tips: Try to achieve mastery in 1 or2 subjects so that u are able to crack all of the questions regarding to that and it will help a lot in ur interviews and try to keep ur cpi above 8 .I wish u all the best for ur future and hope all of u reach new heights.

Round: HR Interview
Experience: HR interview



In HR interview they asked me about



1.Training and project



2.My achievements



3.Be cool and calm in HR interview ,they try to confuse you. Be confident.



ABOUT myself

General Tips: Regarding effect of CPI, I think every company has some consideration about CPI,as it tells them that student is sincere in whatever field he is in.But in this selection I have observed that they haven’t selected on the basis of CPI. I have observed that they have taken some weightage of the written and interview and combined their score as a whole.AND you should be superb in your technical interview specially and hr interview too.*Be confident,composed,and express to HR that u really want to join this company.Make them believe that you are fit for this company and you strongly wish to join the company.ALL D BEST 
Skill Tips: Initially I had been very shy and participated very little in any conversation but I worked hard to overcome that.I started speaking to myself in front of mirror and learned to keep eye contact with others and developed a lot of confidence.Also I tried to have a lot of conversation with my friends.I practiced a lot at home, prepared for resume and PI.Also I tried speaking English with my family members.So I think a lot of practice help me improve gradually.
College Name: NIT RAIPUR

Round: Technical + HR Interview
Experience: They were mainly interested in people who are willing to work in their company for a long time. You have to convince them that you are really interested in core job and you will stay long. They did not ask technical much as my CG was high.

College Name: IIT Madras

Round: Test
Experience: There was a written test which had both aptitude as well technical questions. The test was an elimination round and you had to perform above average to make it to the GD.

Round: Group Discussion
Experience: GD was not an elimination round. They had generally the most recent topics for group discussion like Lokpal Bill. They were only testing one’s communication skill (they wanted basic communication ability) rather than eliminating someone on the basis of it.

Round: HR Interview
Experience: In the interview round they asked me questions about me and how do I mange difficult pressure situations. They also asked me about how am I different from others. They also asked me about my low CGPA and its contradiction with my high 10th and 12th class percentage. In an interview if you have a low grade you should be prepared to defend your poor grade.
Beside these general questions, they asked me about my internship and projects. I would suggest going through you project reports in detail so that you are able to answer even in depth questions (one or two such questions might come up). They asked me about the use of copper in steel. They also asked me to explain metallurgy to someone who had no idea about it.
My internship was on defects in rolled products. So they asked what did I do to control them and what were the results I achieved.

College Name: IIT ROORKEE