Birla Corporation Technician Interview Questions and Answers

Q1. What is the mix design
Ans. 
Mix design is the process of determining the proportions of ingredients in a concrete mixture to achieve the desired properties.
• Mix design involves selecting the appropriate materials such as cement, aggregates, and water.

• The proportions of each material are determined based on factors like strength, workability, and durability requirements.

• Testing is often conducted to ensure the mix meets specifications before it is
Answered by AI
Add your answer
Q2. Admixture testing
Add your answer

Exlent questions in aptitude test.

Q1. Technical questions in one by one
Add your answer
Q2. Great one technical questions in cement
Add your answer

Q1. Monthly salary ,and pay silp
Add your answer
Q2. Salery slip, CTC
Add your answer
Q3. Base payment salary
Add your answer

Posted location ,in any one location in Himachal Pradesh and North site

Q1. CNC programming and setting
Add your answer
Q2. Manpower handling
Add your answer
Q3. Production planning
Add your answer
Q4. Rejection control maintain PPM
Ans. 
Rejection control is essential to maintain PPM (parts per million) levels within acceptable limits.
• Implementing quality control measures to reduce rejection rates

• Regularly monitoring rejection rates and analyzing root causes

• Training employees on proper procedures to minimize rejections

• Utilizing statistical process control tools to track rejection trends

• Collaborating with suppliers to improve quality of incoming materia
Answered by AI
Add your answer
Q5. New standard Tooling inspection
Ans. 
Implementing a new standard tooling inspection process to ensure quality and efficiency.
• Develop a detailed checklist of all required tooling inspections

• Train technicians on the new inspection process

• Regularly review and update the inspection standards based on feedback and results

• Utilize digital tools for easier tracking and documentation

• Implement a system for reporting and addressing any issues found during inspection
Answered by AI
Add your answer
Q6. 5 s maintain on shop floor
Ans. 
Maintaining 5S on the shop floor involves organizing, cleaning, standardizing, and sustaining a workspace for efficiency and safety.
• Sort: Remove unnecessary items and organize tools and materials in designated locations.

• Set in order: Arrange items so they are easily accessible and clearly labeled.

• Shine: Regularly clean and inspect the workspace to ensure cleanliness and safety.

• Standardize: Implement consistent processe...read more
Answered by AI
Add your answer
Q7. IMS document maintain
Add your answer
Q8. Section Kaizen implementation
Ans. 
Kaizen implementation involves continuous improvement in processes and systems.
• Kaizen focuses on small, incremental changes to improve efficiency and quality.

• Involves all employees in identifying and implementing improvements.

• Encourages a culture of continuous learning and innovation.

• Examples: implementing a 5S system, setting up regular improvement workshops, using visual management tools.
Answered by AI
Add your answer
Q9. Opretor training provide as per SOP
Add your answer
Q10. PPE maintain as per required
Add your answer

Q1. How to hide lying maintenance mechanic jobs
Ans. 
To hide lying maintenance mechanic jobs, one can falsify records, manipulate data, or cover up mistakes.
• Falsify maintenance logs to show completed tasks that were not actually done

• Manipulate equipment readings to make it appear that maintenance was performed

• Cover up mistakes by quickly fixing issues before they are noticed

• Provide false documentation or reports to show compliance with maintenance schedules
Answered by AI
View 1 more answer
Q2. Centrifugal pumps practically handing of the jobs Preventive maintenance jobs
Ans. Oil level checking &analyze the conditions >m Check the free rotation with hand >■ Check pump float axúial play &radial play with use dial cage >■ Check pump run out pump coupling side >Check coupling &coupling pushing conditions >■ Check the all festers tightening
Answered Anonymously
Add your answer
Q3. Major overhauling single &multistage centrifugal pumps
Ans. Knowledge pump dismantle &assemble &preparing tools and spears > Maintain dismantle clearance list & assemble clearance list >■ Shaft run out checking &shaft straight and correct the run out >a Shaft measurement for compare old &new shafts or fabricate new shaft>■ Assemble rotor and check rotor runout adjusting &corrections >■ Pump rotor assembly for dynamic balancing >■ Measurement wearing ring &replace the wea...read more
Answered Anonymously
Add your answer
Q4. Rotary pump type
Ans. External double helical gear pump >Internal gear pump Screw pump
Answered Anonymously
Add your answer
Q5. Rotary pump practically handled of major overhauling work
Ans. 
Yes, I have practically handled major overhauling work on rotary pumps.
• Performed disassembly and reassembly of rotary pumps for maintenance and repair

• Replaced worn out parts such as seals, bearings, and impellers

• Inspected and tested pump components to ensure proper functioning

• Adjusted pump settings and alignments for optimal performance

• Trained junior technicians on rotary pump overhauling procedures
Answered by AI
View 1 more answer
Q6. Mechanical seal practically handled of major overhauling work
Ans. >a The knowledge seal lapping for using diamond lapping liquid >a Face testing for dicrocromatic light >■ Check all parts condition >■ Seal assemble and check seal compression measurement by use the verniyer depth gauge >■ Seat ring assemble on the gland plate for use light duty press >■ Seal leakage check >■ Mate ring assemble retainer with use snap ring
Answered Anonymously
Add your answer

Q1. What is the HT capacitor nct working principle
Ans. 
HT capacitor nct working principle involves storing electrical energy in an electric field.
• HT capacitors store electrical energy in an electric field

• They are used in high voltage applications to improve power factor and reduce reactive power

• The working principle involves charging and discharging of the capacitor to regulate voltage levels
Answered by AI
View 1 more answer
Q2. Dol Control wiring diagram drawing
Ans. 
A Dol Control wiring diagram drawing is a schematic representation of the wiring connections for a Direct-On-Line motor control system.
• DOL Control wiring diagrams typically show the connections between the motor, contactor, overload relay, and power supply.

• The diagram may include symbols for components such as motor starters, fuses, switches, and terminals.

• It is important to follow the wiring diagram accurately to ensu...read more
Answered by AI
Add your answer
Q3. I am drawing and explain the wiring
Add your answer
Q4. Do you Maintanence the HT < motors trouble suit
Ans. 
Yes, I have experience in maintaining HT motors and troubleshooting issues.
• Yes, I have experience in maintaining HT motors and troubleshooting any issues that may arise.

• I am familiar with conducting regular maintenance checks on HT motors to ensure they are functioning properly.

• I have the skills to diagnose and repair any problems that may occur with HT motors, such as overheating or electrical issues.
Answered by AI
View 1 more answer

Q1. Urs pesonal details and family BACKGROUND
Add your answer

Q1. Urs technical knowledge
Add your answer

Q1. It's totally about instrumental questions
Add your answer
Q2. Aked to me about all instrumental questions
Add your answer