Upload Button Icon Add office photos

Bilt

Compare button icon Compare button icon Compare

Filter interviews by

Bilt MGT. Trainee Interview Questions and Answers

Updated 29 Jul 2017

Bilt MGT. Trainee Interview Experiences

1 interview found

MGT. Trainee Interview Questions & Answers

user image Anonymous

posted on 29 Jul 2017

I was interviewed in Jun 2017.

Interview Questionnaire 

1 Question

  • Q1. Apart from normal technical questions relating to studies; there were other technical questions which comes from experience only

Interview Preparation Tips

Round: Technical + HR Interview
Experience: So I could honestly answer few of them but where I was not confident I firmly said NO keeping in mind the fact that these are the areas I need to work upon. But there was this last question which perhaps cinched the show. This position was based somewhere in remote are of Maharashtra in a very old factory with average age of people in the division around 45..50 and then I was asked how I am going to lead in such an environment. I was numb but then I was honest in responding. I vaguely remembered I did mention that it's a joinery that I am undertaking and I need to now learn the art of leading also. Leaders are not only born they are also made. I need to put my knowledge and positive attitude to learn this at. To my surprise out of so many candidates I got selected for the job perhaps the other story could be the other candidates might have rejected the offer being in such a far flung place. But that did not bother me. Honesty; sincerity, attitude pays

College Name: Institute Of Chartered Accountants Of India

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How to measure paper quality
  • Ans. 

    Paper quality can be measured by factors such as weight, thickness, brightness, opacity, and smoothness.

    • Weight: measured in grams per square meter (gsm), higher weight usually indicates better quality

    • Thickness: thicker paper is generally considered higher quality

    • Brightness: higher brightness levels indicate better quality paper

    • Opacity: higher opacity means less show-through, a sign of better quality

    • Smoothness: smoother

  • Answered by AI
  • Q2. Different between steam and fluid turbines
  • Ans. 

    Steam turbines use steam as the working fluid, while fluid turbines use various fluids such as water, gas, or oil.

    • Steam turbines use steam generated from water as the working fluid.

    • Fluid turbines can use various fluids such as water, gas, or oil as the working fluid.

    • Steam turbines are commonly used in power plants for electricity generation.

    • Fluid turbines are used in various applications including hydroelectric power p

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give answer of all question by honesty
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

100 marks test both aptitude & subjectable questions

Round 2 - HR 

(1 Question)

  • Q1. General knowledge, study related questions
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a recent graduate with a degree in engineering. I have a strong passion for problem-solving and a desire to learn and grow in the field.

    • Recent graduate with a degree in engineering

    • Passionate about problem-solving

    • Eager to learn and grow in the field

  • Answered by AI
  • Q2. What is pulp and paper technologies
  • Ans. 

    Pulp and paper technologies refer to the processes involved in the production of paper from wood or recycled materials.

    • Pulp production involves separating fibers from wood or recycled materials

    • Paper production involves forming a sheet of paper from pulp and drying it

    • Technologies used include chemical pulping, mechanical pulping, and recycled fiber processing

    • Environmental concerns include deforestation and pollution fro

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical knowledge about paper pulp industry

I applied via campus placement at Jawaharlal Nehru Technological University (JNTU)

Interview Questionnaire 

3 Questions

  • Q1. 1.in industrial applications how the speed reduction is achieved.
  • Ans. 

    Speed reduction in industrial applications

    • Speed reduction is achieved using gearboxes or pulleys and belts

    • Gearboxes are used for high torque applications

    • Pulleys and belts are used for low torque applications

    • Variable frequency drives (VFDs) can also be used for speed control

    • Examples include conveyor belts, fans, pumps, and mixers

  • Answered by AI
  • Q2. 2.what is fully developed flow can you explain in depth with math?
  • Ans. 

    Fully developed flow is a state where the velocity profile of a fluid remains constant over time and distance.

    • Fully developed flow occurs in long pipes where the fluid has enough time to reach a steady state.

    • In this state, the velocity profile is parabolic and the flow is laminar.

    • The Reynolds number is used to determine if the flow is fully developed or not.

    • Mathematically, fully developed flow is described by the Hagen...

  • Answered by AI
  • Q3. 3.can you give little insight about navier Stokes equation
  • Ans. 

    Navier-Stokes equation is a mathematical formula that describes the motion of fluids.

    • It is used to predict the velocity and pressure distribution of fluids in motion.

    • It is a set of partial differential equations that describe the conservation of mass, momentum, and energy.

    • It is widely used in engineering and physics to study fluid dynamics.

    • It is named after Claude-Louis Navier and George Gabriel Stokes, who first deriv...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Take some time before answering a question it's ok if u take one minute to answer the question. Don't panic cause they gonna observe your confidence levels. Just keep it simple and real

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Case Study 

Questions about myself, experience
qualifications, and my qualitys.

Round 3 - Group Discussion 

Group discussion , about me and my qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive always, about you and your hard work .............. .

I applied via campus placement at Lalbhai Dalpatbhai College of Engineering, Ahmedabad and was interviewed in Mar 2020. There were 5 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Tell me something about yourself
  • Q2. What is endothermic and exothermic reaction?
  • Ans. 

    Endothermic reactions absorb heat while exothermic reactions release heat.

    • Endothermic reactions require energy input to proceed while exothermic reactions release energy.

    • Endothermic reactions feel cold while exothermic reactions feel hot.

    • Examples of endothermic reactions include melting ice and evaporating water while examples of exothermic reactions include burning wood and rusting iron.

  • Answered by AI
  • Q3. What is material balance
  • Ans. 

    Material balance is a concept used in chemical engineering to track the flow of materials through a process.

    • It involves accounting for all the inputs and outputs of a system

    • It is used to ensure that the process is operating efficiently and effectively

    • It can be used to identify areas where losses are occurring and to optimize the process

    • Examples include tracking the flow of raw materials into a chemical plant and the fl

  • Answered by AI
  • Q4. Tell me about your project?
  • Q5. Will you comfortable in odisha?

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident and be natural

I was interviewed in Mar 2017.

Interview Questionnaire 

7 Questions

  • Q1. Tell me something about yourself.
  • Q2. Why did you go to USA
  • Q3. Why don't you want to go to environment research field
  • Q4. How's your internship experience
  • Ans. 

    My internship experience was highly valuable and provided me with practical skills and industry exposure.

    • I interned at XYZ Company for 3 months

    • I worked on various projects and gained hands-on experience in my field

    • I collaborated with a team of experienced professionals and learned from their expertise

    • I developed strong problem-solving and communication skills

    • I received positive feedback from my supervisors and was able...

  • Answered by AI
  • Q5. Technical questions as well
  • Q6. Tell me something about yourself
  • Q7. What's your hobby

Interview Preparation Tips

Round: Resume Shortlist
Experience: This round has nothing to do with applicants it's done by company itself.
Tips: For this round be specific and be clear about applying company and be clear about your post in which you are going to apply.

Round: Test
Experience: For me I applied for core company and in this test I asked 20 technical questions
Tips: Like wise I said be specific for company profile
Duration: 30 minutes
Total Questions: 20

Skills: Communication, Confidence Levels Of Students, Knowledge Of Your Resume Points, Knowledge In Core Topics
College Name: IIT Roorkee

Tell us how to improve this page.

Interview Questions from Similar Companies

Sobha Interview Questions
3.9
 • 128 Interviews
DLF Interview Questions
3.9
 • 75 Interviews
JK Paper Interview Questions
4.0
 • 48 Interviews
Prestige Group Interview Questions
4.3
 • 36 Interviews
Brigade Group Interview Questions
4.1
 • 32 Interviews
Puravankara Interview Questions
3.7
 • 18 Interviews
View all
Assistant Manager
33 salaries
unlock blur

₹3.3 L/yr - ₹8.5 L/yr

Deputy Manager
15 salaries
unlock blur

₹8 L/yr - ₹12.4 L/yr

Executive
10 salaries
unlock blur

₹2.2 L/yr - ₹6.7 L/yr

Executive Engineer
7 salaries
unlock blur

₹3.6 L/yr - ₹12 L/yr

Electrical Engineer
6 salaries
unlock blur

₹1 L/yr - ₹3.3 L/yr

Explore more salaries
Compare Bilt with

Godrej Properties

3.7
Compare

DLF

3.9
Compare

Sobha

3.9
Compare

Prestige Group

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview