Upload Button Icon Add office photos

Bharat Gears

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Bharat Gears Production Supervisor Interview Questions and Answers

Updated 21 Jul 2023

Bharat Gears Production Supervisor Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Case Study 

Conditions Gear case study prossic gear part required to case

Round 3 - Technical 

(3 Questions)

  • Q1. Sqf and cf
  • Q2. Sealed quench furnace and Continues Furnace
  • Q3. Why component preheat to heat treatment
  • Ans. 

    Component preheating before heat treatment is necessary to prevent thermal shock and ensure uniform heating.

    • Preheating helps to prevent thermal shock, which can lead to cracking or distortion of the component during heat treatment.

    • It ensures uniform heating of the component, which is essential for achieving the desired metallurgical properties.

    • Preheating can also help to reduce the overall processing time by allowing f...

  • Answered by AI
Round 4 - Case Study 

Gear and piniyan case study

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Asked about experience till time
Round 3 - Technical 

(1 Question)

  • Q1. Based. On the experience, was interviewed on the details of the experience
Round 4 - Case Study 

Knowledge and testing about CNC and vmc along with the practical process

Interview Preparation Tips

Interview preparation tips for other job seekers - Study your experience thoroughly
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before May 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Whats Pressure die casting process
  • Ans. 

    Pressure die casting is a metal casting process where molten metal is injected into a mold cavity under high pressure.

    • Molten metal is injected into a mold cavity under high pressure

    • The mold cavity is created using two hardened tool steel dies

    • The process is used to produce high volume, complex metal parts with tight tolerances

    • Commonly used for manufacturing automotive parts, electronic housings, and appliance parts

  • Answered by AI
  • Q2. Defects pressure die casting solution
Round 3 - HR 

(2 Questions)

  • Q1. Approach for salary
  • Q2. Confirmation notice prior
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. About CNC Machining Basic Coding Technical questions Personal information
  • Q2. Self introduction Speaking confidance

Interview Preparation Tips

Interview preparation tips for other job seekers - Study about technical questions
Good dressing
Self confidence

Interview Questionnaire 

1 Question

  • Q1. Maiacnce production ka target

Interview Preparation Tips

Interview preparation tips for other job seekers - Ye

I applied via AmbitionBox and was interviewed in Oct 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Production eng.
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Rahul Parmar.i have current job Delhi Bawana

I applied via Campus Placement and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Types of QC tools
  • Ans. 

    QC tools are used to ensure product quality. Types include statistical process control, Pareto charts, and fishbone diagrams.

    • Statistical process control

    • Pareto charts

    • Fishbone diagrams

    • Control charts

    • Histograms

    • Scatter diagrams

    • Check sheets

    • Flowcharts

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Problem solving techniques
  • Ans. 

    Problem solving techniques involve identifying the root cause of an issue and developing a plan to address it.

    • Gather information and data to fully understand the problem

    • Break down the problem into smaller, more manageable parts

    • Brainstorm potential solutions and evaluate their feasibility

    • Implement the chosen solution and monitor its effectiveness

    • Continuously assess and adjust the solution as needed

  • Answered by AI
  • Q3. CNC programmingand methodology
  • Q4. Troubleshooting of CNC programming
  • Ans. 

    Troubleshooting CNC programming involves identifying and resolving errors in the code.

    • Check for syntax errors in the code

    • Verify that the correct tool paths are being used

    • Ensure that the machine is properly calibrated

    • Inspect the tooling for wear or damage

    • Monitor the machine during operation for any abnormalities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well prepared and on time answer for each questions

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Mathamatics resoning

I applied via Company Website and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. How to manage your man power?
  • Q2. Technical questions about machines.
  • Q3. How to maintain production quantity and quality output?
  • Ans. 

    Maintain production quantity and quality output by optimizing processes, training employees, and monitoring performance.

    • Regularly review and optimize production processes to eliminate inefficiencies and reduce waste.

    • Provide ongoing training and development opportunities for employees to improve their skills and knowledge.

    • Implement quality control measures to ensure that products meet or exceed customer expectations.

    • Mon...

  • Answered by AI
  • Q4. Questions about family backgrounds
  • Q5. Introduce yourself about your own

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir,
I will thankfull for given this opportunity to Express my knowledge..

I applied via Naukri.com and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. No any questions

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test
Contribute & help others!
anonymous
You can choose to be anonymous

Bharat Gears Interview FAQs

How many rounds are there in Bharat Gears Production Supervisor interview?
Bharat Gears interview process usually has 4 rounds. The most common rounds in the Bharat Gears interview process are Case Study, Resume Shortlist and Technical.
What are the top questions asked in Bharat Gears Production Supervisor interview?

Some of the top questions asked at the Bharat Gears Production Supervisor interview -

  1. Why component preheat to heat treatm...read more
  2. Sealed quench furnace and Continues Furn...read more
  3. Sqf and ...read more

Recently Viewed

INTERVIEWS

Avery Dennison

No Interviews

INTERVIEWS

Avery Dennison

No Interviews

DESIGNATION

INTERVIEWS

Bajaj Capital

No Interviews

INTERVIEWS

Avery Dennison

No Interviews

INTERVIEWS

Bajaj Capital

No Interviews

INTERVIEWS

Bajaj Capital

No Interviews

INTERVIEWS

Avery Dennison

No Interviews

CAMPUS PLACEMENT

MIT College Of Management

INTERVIEWS

Bharat Gears

No Interviews

Tell us how to improve this page.

Bharat Gears Production Supervisor Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more
Bharat Gears Production Supervisor Salary
based on 99 salaries
₹2.1 L/yr - ₹4.5 L/yr
9% more than the average Production Supervisor Salary in India
View more details

Bharat Gears Production Supervisor Reviews and Ratings

based on 17 reviews

3.3/5

Rating in categories

3.4

Skill development

3.5

Work-life balance

2.6

Salary

3.1

Job security

2.7

Company culture

2.5

Promotions

3.3

Work satisfaction

Explore 17 Reviews and Ratings
Production Engineer
175 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
122 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Supervisor
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
55 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Mechanical Engineer
55 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bharat Gears with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Sundaram Clayton

4.1
Compare

Rane (Madras)

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview