B5 Plus Senior Mechanical Technician Interview Questions and Answers

Q1. Junior engineering mechanical JE
Ans. The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical/Electronics) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below: Paper-I (i) General Intelligence & Reasoning: The Syllabus for Gener...read more
Answered Anonymously
Add your answer
Q2. Assistant manager
Add your answer
Q3. Incharge assistant
Add your answer
Q4. Mechanical Engineering suparvisor
Add your answer

Q1. What is friendly
Add your answer
Q2. What is the price
Add your answer

Q1. What is aptitude
Add your answer
Q2. What is the meaning of coding
Add your answer

Q1. Diploma Mechanical engineering JE
Ans. 
A Diploma in Mechanical Engineering can prepare students for a career as a Junior Engineer (JE) in the public or private sector:
Answered Anonymously
Add your answer
Q2. Diploma mechanical engineering supervisor
Ans. 
A three-year course that provides students with the knowledge and skills to design, manufacture, install, and operate engines and machines. Students learn about forces and motion, and subjects include automobile engineering, manufacturing engineering, and power plant engineering.
Answered Anonymously
Add your answer

Q1. Diploma mechanical engineering JE
Ans. 
A Diploma in Mechanical Engineering can prepare students for a career as a Junior Engineer (JE) in the public or private sector:
Answered Anonymously
Add your answer
Q2. Diploma Mechanical engineering supervisor
Add your answer

Q1. Assistant manager
Add your answer
Q2. Assistant incharge
Add your answer

Q1. How to know if Hydraulic cylinder leakage
Ans. 
Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.
• Inspect the area around the hydraulic cylinder for oil puddles or stains

• Monitor the performance of the hydraulic system for any decrease in efficiency

• Listen for any abnormal noises coming from the hydraulic cylinder during operation
Answered by AI
Add your answer
Q2. What is NAS
Ans. 
NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.
• NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.

• NAS devices can be accessed by multiple users and devices simultaneously over a network.

• NAS devices often have their own operating system and can run various applications such...read more
Answered by AI
Add your answer

Gearbox and fluid coupling replacement work and development

Senior manager and manager and all employees job description for growth and development

Cash study in machanical engineering decision making thermodynamics fluid machanics and heat transfer

Q1. Gear box replacement work safely first and all ppes sure and paper work and try out checking and saving and job work clean and fresh and tackup up and clamping conveyer belt old gear box replacement for ne...read more
Add your answer
Q2. Barring checking and replacement work and safety first and all ppes sure and paper work and try out sure and teckup up and clamping conveyer belt and plummer block top cover open Barring checking and remov...read more
Add your answer
Q3. Conveyer belt pmi roller checking work and safety first and all ppes sure and paper work and walked away clean and fresh and Roller cut marking frem number and belt tracking and belt close and try out sure...read more
Add your answer
Q4. Barring greasing work and safety first and all ppes sure and paper work and conveyer belt running and walked away clean and fresh and grease gun and greasing work
Add your answer
Q5. Conveyer belt panching work and safety first and all ppes sure and paper work and try out same position and solution and hardner bad mixed mad belt panching work
Add your answer
Q6. Conveyer belt chute replacement work and safety first and all ppes sure and paper work and try out and jobs walked away clean and fresh and same chute replace and tightening bolt and machine welding and fi...read more
Add your answer
Q7. Conveyer belt v-scraper replacement work and safety first and all ppes sure and paper work belt close and try out and walked away from clean and fresh and same v -scraper making and replacement work
Add your answer
Q8. Gear box old oil replacement work and safety first and all ppes sure and paper work and belt close and try out and walked away clean and fresh and oil gauge and checking and drain oil and Aw320 oil replac...read more
Add your answer
Q9. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out lockout and tagout (loto) safety procedure and fuse plug and open west oil remove and new aw46oil replacem...read more
Add your answer
Q10. Drive pmi work and safety first and all ppes sure and paper work and try out ofter walked away clean and fresh and bass bolt nut tightening work
Add your answer
Q11. Gear box cleaning work and safety first and all ppes sure and paper work and walked away clean and fresh and ty out sure and clean and fresh and same process paper work cancelled and conveyer belt running...read more
Add your answer

Q1. Process of production
Add your answer
Q2. Final production process
Add your answer

Q1. What are type of crane used
Ans. 
Various types of cranes are used in mechanical maintenance, including overhead cranes, gantry cranes, jib cranes, and mobile cranes.
• Overhead cranes are commonly used in industrial settings for lifting and moving heavy loads.

• Gantry cranes are used in shipyards and construction sites for lifting and moving large objects.

• Jib cranes are often used in workshops and warehouses for precise lifting and positioning of materials...read more
Answered by AI
Add your answer
Q2. What are type of loading on bearing
Ans. 
Types of loading on bearings include radial load, axial load, and moment load.
• Radial load: Load acting perpendicular to the axis of rotation.

• Axial load: Load acting parallel to the axis of rotation.

• Moment load: Load causing bending or twisting of the bearing.

• Combination loading: Bearings may experience a combination of radial, axial, and moment loads.

• Examples: Radial load on a wheel bearing, axial load on a thrust bear
Answered by AI
Add your answer
Q3. What type of heat treatment to be done on tube mill shaft
Ans. 
The tube mill shaft should undergo heat treatment to improve its strength and durability.
• The most common heat treatment for tube mill shafts is quenching and tempering.

• Quenching involves heating the shaft to a high temperature and then rapidly cooling it in water or oil to increase its hardness.

• Tempering is done after quenching to reduce the brittleness caused by the rapid cooling process.

• Other heat treatment methods l...read more
Answered by AI
Add your answer
Q4. What do you understand by Pickling process
Ans. 
Pickling process is a metal surface treatment method to remove impurities and improve corrosion resistance.
• Pickling is a chemical process used to remove impurities like stains, rust, and scale from metal surfaces.

• It involves immersing the metal in an acidic solution, such as hydrochloric acid or sulfuric acid.

• The process helps to improve the metal's corrosion resistance and prepare it for further treatments like painti...read more
Answered by AI
Add your answer
Q5. What happen in cold rolling mill process to structure of steel
Ans. 
In cold rolling mill process, the structure of steel is altered through compression and deformation.
• Cold rolling reduces the thickness of steel by compressing it between rollers

• This process increases the strength and hardness of the steel

• Grain structure of the steel becomes elongated and aligned in the direction of rolling

• Cold rolling can also improve the surface finish and dimensional accuracy of the steel

• Examples: Co...read more
Answered by AI
Add your answer
Q6. How Centrifugal pump work
Ans. 
Centrifugal pumps work by converting mechanical energy from a motor into kinetic energy to move fluid through the pump.
• Centrifugal force is created by the rotation of the pump impeller, which pushes the fluid towards the outer edges of the pump casing.

• The kinetic energy of the fluid increases as it moves through the pump, creating pressure that forces the fluid out of the pump discharge.

• Centrifugal pumps are commonly u...read more
Answered by AI
Add your answer
Q7. Tube mill roll materail and their root dia
Ans. 
Tube mill rolls are typically made of high-quality alloy steel or tool steel, with varying root diameters depending on the specific application.
• Tube mill rolls are commonly made of materials such as high-quality alloy steel or tool steel for durability and wear resistance.

• The root diameter of tube mill rolls can vary depending on the specific requirements of the milling process.

• Examples of tube mill roll materials incl...read more
Answered by AI
Add your answer
Q8. Gear box ratio and output power
Ans. 
Gear box ratio determines the relationship between input and output speeds, while output power is the amount of work done per unit of time.
• Gear box ratio is the ratio of the number of teeth on the input gear to the number of teeth on the output gear.

• Output power is the product of the force applied and the distance over which the force is applied per unit of time.

• For example, if a gear box has a ratio of 2:1 and the inp...read more
Answered by AI
Add your answer