i
B5 Plus
Filter interviews by
I applied via Job Fair and was interviewed before Mar 2022. There were 2 interview rounds.
Electrical equipment can be protected from damage by implementing proper maintenance and safety measures.
Regular inspection and maintenance of equipment
Proper grounding and earthing
Installation of surge protectors and voltage regulators
Use of protective devices such as fuses and circuit breakers
Proper training of personnel handling the equipment
Implementation of safety protocols and procedures
Use of appropriate PPE
Avoi...
Regular maintenance, proper lubrication, and monitoring of operating conditions can prevent motors from breaking down easily.
Perform regular maintenance on the motors to ensure they are in good working condition.
Properly lubricate the motors to reduce friction and wear.
Monitor the operating conditions of the motors, such as temperature and vibration, to detect any potential issues early on.
Use high-quality parts and co...
Top trending discussions
posted on 16 Apr 2024
I applied via Referral and was interviewed in Mar 2024. There was 1 interview round.
Aptitude test b.e electronics level
I applied via Company Website and was interviewed in Sep 2021. There was 1 interview round.
Drive is a device that controls the speed, torque, direction, and acceleration of an electrical motor.
A drive is an electronic device that regulates the power supplied to an electric motor.
It controls the speed, torque, direction, and acceleration of the motor.
Drives are used in various applications such as pumps, fans, conveyors, and compressors.
Examples of drives include AC drives, DC drives, servo drives, and steppe
PLC is a programmable logic controller used for automation of industrial processes, while SCADA is a supervisory control and data acquisition system used for monitoring and controlling large-scale processes.
PLC is used for controlling specific processes, while SCADA is used for monitoring and controlling multiple processes
PLC is hardware-based, while SCADA is software-based
PLC is used for real-time control, while SCADA...
VFD stands for Variable Frequency Drive. It is an electronic device that controls the speed of an AC motor by varying the frequency of the electrical supply to the motor.
VFD controls the speed of an AC motor by varying the frequency of the electrical supply to the motor
It converts the incoming AC power to DC and then back to AC at the desired frequency
VFDs are used in various applications such as HVAC systems, pumps, c...
Robots work based on a set of programmed instructions and use sensors and actuators to interact with their environment.
Robots follow a set of instructions called a program.
They use sensors to gather information about their surroundings.
Actuators allow robots to physically interact with their environment.
Robots can be programmed to perform various tasks, such as assembly, welding, or inspection.
Examples of robots includ...
DG set stands for Diesel Generator set. It is a combination of a diesel engine and an electric generator used to generate electrical power.
DG set is commonly used as a backup power source in case of power outages or in remote areas where there is no access to the main power grid.
It consists of a diesel engine that drives an alternator to produce electricity.
DG sets are available in various sizes and power capacities to...
CNC machine stands for Computer Numerical Control machine. It is a computer-controlled machine used for precision manufacturing.
CNC machines are used in various industries such as aerospace, automotive, and electronics.
They use CAD (Computer-Aided Design) software to create a design that is then translated into a set of instructions for the machine.
The machine then uses these instructions to cut and shape the material ...
VMC machine stands for Vertical Machining Center, used for precision cutting and drilling of metal and plastic materials.
VMC machine is a type of CNC machine used for milling, drilling, and cutting operations
It has a vertical spindle that moves along the Z-axis to perform operations
It is used for precision cutting and drilling of metal and plastic materials
Examples of VMC machines include Haas VF-2, Mazak VCN-510C, and
posted on 27 Jan 2025
PLC control wiring is the process of connecting input and output devices to a programmable logic controller for automation.
PLC control wiring involves connecting sensors, switches, actuators, and other devices to the PLC.
The wiring is typically done using cables, terminal blocks, and connectors.
Proper labeling and organization of wires is important for troubleshooting and maintenance.
Examples of PLC control wiring incl...
Parameters for setting a Variable Frequency Drive (VFD) include frequency, voltage, acceleration/deceleration time, and motor overload protection.
Frequency setting determines the speed of the motor.
Voltage setting controls the voltage supplied to the motor.
Acceleration/deceleration time setting determines how quickly the motor ramps up or down in speed.
Motor overload protection setting helps prevent damage to the motor
posted on 19 Sep 2023
I applied via Campus Placement and was interviewed in Aug 2023. There were 2 interview rounds.
Verbal reasoning logical reasoning spatial ability
posted on 11 Mar 2022
I applied via AmbitionBox and was interviewed in Sep 2021. There were 4 interview rounds.
Electrical
posted on 16 Mar 2022
I applied via Walk-in and was interviewed in Feb 2022. There were 2 interview rounds.
I expect a competitive salary based on my qualifications and experience.
I am looking for a salary that reflects the value I can bring to the company.
I have researched the average salary range for Electrical Maintenance Engineers in this industry.
I am open to negotiation and would like to discuss the salary package in more detail.
I am confident that my skills and expertise justify a fair compensation.
I am focused on fin...
I worked as an Electrical Maintenance Engineer at XYZ Company.
Performed routine maintenance and troubleshooting of electrical systems.
Inspected and repaired electrical equipment and machinery.
Collaborated with a team to develop and implement preventive maintenance plans.
Responded to emergency breakdowns and resolved electrical issues promptly.
Maintained accurate documentation of maintenance activities and equipment his
I have the necessary skills, experience, and dedication to excel in this role.
I have a strong background in electrical maintenance and troubleshooting.
I have successfully completed several projects where I improved equipment reliability and reduced downtime.
I am highly skilled in analyzing complex electrical systems and identifying potential issues.
I am a quick learner and can adapt to new technologies and processes ea...
Seeking new opportunities for professional growth and challenges.
Looking for a change to expand my skill set and knowledge in electrical maintenance.
Seeking new challenges and opportunities to apply my expertise in a different work environment.
Interested in joining a company that values innovation and offers room for career advancement.
Want to work on larger-scale projects and contribute to the success of a dynamic org...
In 5 years, I see myself as a senior electrical maintenance engineer leading a team and implementing innovative solutions.
Leading a team of electrical maintenance engineers
Implementing innovative solutions to improve efficiency and reduce downtime
Continuing professional development to stay updated with the latest technologies
Taking on additional responsibilities and contributing to the growth of the organization
My strengths include problem-solving skills, attention to detail, and technical knowledge. My weaknesses include a tendency to be too meticulous and a lack of experience in certain areas.
Strength: I have strong problem-solving skills, which allow me to quickly identify and resolve electrical issues.
Strength: I pay great attention to detail, ensuring that all maintenance work is done accurately and efficiently.
Strength:...
I am an experienced Electrical Maintenance Engineer with a strong background in troubleshooting and repairing electrical systems.
I have a Bachelor's degree in Electrical Engineering.
I have worked for 5 years in a manufacturing company, where I was responsible for maintaining and repairing electrical equipment.
I am skilled in reading and interpreting electrical schematics and blueprints.
I have experience in troubleshoot...
I applied via Walk-in and was interviewed before Jun 2021. There were 4 interview rounds.
Technical test, reasoning aptitude test
VCB stands for Vacuum Circuit Breaker.
VCB is an electrical switch that uses vacuum as the arc quenching medium.
It is used to protect electrical equipment from overloads and short circuits.
VCBs are commonly used in power distribution systems and industrial applications.
They offer advantages such as high reliability, compact size, and low maintenance.
Example: A VCB is installed in a substation to protect transformers and
All documents verification
posted on 2 Feb 2023
I applied via Approached by Company and was interviewed before Feb 2022. There were 3 interview rounds.
To reduce breakdown delay time, proper maintenance planning, regular inspections, and quick response to issues are necessary.
Implement a preventive maintenance program
Conduct regular inspections to identify potential issues
Train maintenance staff to quickly respond to breakdowns
Maintain an inventory of critical spare parts
Implement a computerized maintenance management system (CMMS)
Ensure proper documentation of mainte...
I applied via Recruitment Consulltant and was interviewed in Jul 2022. There were 4 interview rounds.
based on 1 interview
Interview experience
Sales Manager
12
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Executive
11
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
8
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive Accountant
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Accountant
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel