Upload Button Icon Add office photos

Filter interviews by

B R Industries Safety Supervisor, Safety Officer Interview Questions, Process, and Tips

Updated 5 Mar 2021

B R Industries Safety Supervisor, Safety Officer Interview Experiences

1 interview found

Interview Questionnaire 

4 Questions

  • Q1. What is electric shock
  • Ans. 

    Electric shock is a sudden discharge of electricity through the body.

    • Electric shock can cause burns, muscle contractions, and even death.

    • It can be caused by direct contact with an electrical source or through a conductive material.

    • The severity of the shock depends on the voltage, current, and duration of exposure.

    • Prevention measures include proper grounding, insulation, and personal protective equipment.

    • First aid for e...

  • Answered by AI
  • Q2. What is near miss
  • Ans. 

    A near miss is an unplanned event that could have resulted in injury, damage or loss but did not.

    • Near misses are often caused by unsafe acts or conditions.

    • They are important to report and investigate to prevent future incidents.

    • Examples include a worker almost falling from a height, a tool almost hitting someone, or a vehicle almost colliding with another.

    • Near misses can provide valuable information for improving safet...

  • Answered by AI
  • Q3. What is ppe
  • Ans. 

    PPE stands for Personal Protective Equipment.

    • PPE is equipment worn to minimize exposure to hazards that may cause serious workplace injuries or illnesses.

    • Examples of PPE include gloves, safety glasses, hard hats, respirators, and earplugs.

    • Employers are responsible for providing PPE to their employees and ensuring that it is properly used and maintained.

    • Employees must also be trained on how to properly use and care for ...

  • Answered by AI
  • Q4. What is accident
  • Ans. 

    An accident is an unplanned and unexpected event that results in harm or injury to people, damage to property or the environment.

    • Accidents can happen in any setting, including workplaces, homes, and public spaces.

    • They can be caused by a variety of factors, such as human error, equipment failure, or environmental hazards.

    • Examples of accidents include slips and falls, car crashes, and chemical spills.

    • Accidents can have s...

  • Answered by AI

Interview questions from similar companies

Interview Questionnaire 

3 Questions

  • Q1. What is hot work?
  • Q2. What is line break?
  • Ans. 

    A line break is the intentional opening of a pipe, vessel, or line to release pressure or to allow maintenance work.

    • Line breaks are done to prevent accidents and injuries caused by pressure build-up.

    • They are also done to allow maintenance work on the equipment.

    • Line breaks should only be done by trained personnel and with proper safety measures in place.

    • Examples of equipment that may require line breaks include pipeline

  • Answered by AI
  • Q3. What is work at height
  • Ans. 

    Work at height refers to any task performed at a height where a person could fall and injure themselves.

    • Work at height includes tasks such as working on a ladder, scaffolding, or a roof

    • It is important to assess the risks and implement safety measures such as fall protection equipment

    • Training and supervision are crucial to ensure workers are aware of the risks and safety procedures

    • Examples of work at height include pain...

  • Answered by AI

Skills evaluated in this interview

Intern Interview Questions & Answers

Thermax Limited user image Shubhechya Sarkar

posted on 22 Aug 2017

I was interviewed in Jan 2017.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself.
  • Ans. 

    I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.

    • Recent graduate with a degree in Computer Science

    • Passionate about coding and problem-solving

    • Strong communication and teamwork skills

  • Answered by AI
  • Q2. Tell us about your involvement in sports and your activities.
  • Ans. 

    I have been actively involved in sports since childhood, participating in various team sports and individual activities.

    • Played soccer for 10 years, competing at a regional level

    • Participated in track and field events in high school, specializing in long jump and hurdles

    • Currently enjoy hiking and rock climbing in my free time

  • Answered by AI
  • Q3. Discussion of company policies about side income and startups.

Interview Preparation Tips

Round: Test
Experience: It was pretty easy and generic. Not much related to my branch i.e. Chemical Engineering. Out of 24, 6 were selected for the next round.
Duration: 1 hour 30 minutes

Round: Group Discussion
Experience: 6 of us were given the choice between 2 topics: online shopping vs. Conventional shopping, and the success of swachh bharat. We selected the prior one after a discussion of 1 minute. We were given 3 minutes to brainstorm and 12 minutes to speak, so 12+3 = 15 minutes total. The mediators, that is the HR lady and the technical gentleman, just listened, did not interfere in our discussions.
Tips: Like any GD, it's crucial to demonstrate leadership without being patronising. And to dominate without being disrespectful to others. While it's ok not to take a rigid stance in a GD, it certainly gets you bonus points if you can convince the other person and "bring them to your side". It's not a debate, so even if you argue, you have to come to a more-or-less unanimous conclusion within the set time so your discussion must have a set direction. Bonus points if you're the one giving the direction.
Duration: 15 minutes

Round: HR Interview
Experience: It was for about 10-15 minutes. The HR lady and the tech gentleman were very chill. They began by asking me about myself. I have a startup of my own so I gave a short intro about myself, my immediate family, my goals and then into my startup. They had gone through my CV so they started asking about my activities in college and what I was doing. I think they were trying to figure out my character and if all of it was genuine. Then I again started talking about my startup, so they finally relented and asked me about it. I explained the idea to them and told them that I would want to continue working on my startup. They told me that it was not in accordance with their company's policy to have an employee occupied full-time in two companies. Then I informed them that my startup was my priority, and we agreed that I would not be a good fit for Thermax.
Tips: Be confident, cool and open during the interview. You are already good if you've progressed to the last stage of the selection process. The interviewer already knows you have flair. What they want to figure out is that whether you are the right fit for their company's culture. If you're not, no matter how good you are, they will not select you. And that's ok.

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

I applied via Walk-in and was interviewed in Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Hi

Interview Preparation Tips

Topics to prepare for Thermax Limited Intern interview:
  • Java
Interview preparation tips for other job seekers - Prepare codes well
Revise oops

I applied via Referral and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Questions are based on your Engg. Stream. And also based on company profile as well as manufacturing products . And why you want to join in this organisation?
  • Q2. My advice for interview is first of all clear your basics what you have learnt in your mind. And be what you are . Don't need to act I mean be comfortable with interviewer and confident.

Interview Preparation Tips

Interview preparation tips for other job seekers - My interview was taken by Manager. and he asked many questions on basics of my Engg. Stream.
It lasted for 20 min.
It was technical as well as non-technical interview.
It was my first off campus interview. Due to covid i have given this by online and worked as well from home.
It was really good experience.
Thank you!

I applied via Naukri.com and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Fast company work experience & my self introduction, personal skills etc
  • Q2. How to feel working in fast company

Interview Preparation Tips

Interview preparation tips for other job seekers - It's something good

I applied via Approached by Company and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Drum level like single element and three elements

Interview Preparation Tips

Interview preparation tips for other job seekers - Company is ok anyone can join this company, all the thing that are systematicg

I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All were professional questions wrt to their department

Interview Preparation Tips

Interview preparation tips for other job seekers - It was an virtual interview, with panel board members, they test our professional standard and expect honest answers.

I applied via Naukri.com and was interviewed in Jul 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 
Round 3 - One-on-one 
Round 4 - HR 

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, most of the Questions based on past experience

B R Industries Interview FAQs

What are the top questions asked in B R Industries Safety Supervisor, Safety Officer interview?

Some of the top questions asked at the B R Industries Safety Supervisor, Safety Officer interview -

  1. What is electric sh...read more
  2. What is accid...read more
  3. What is near m...read more

Tell us how to improve this page.

Applications Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Application Engineer
19 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Sales Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Solution Expert
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare B R Industries with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Tractors and Farm Equipment

4.1
Compare

Isgec Heavy Engineering

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview