Upload Button Icon Add office photos

Filter interviews by

Assystem Junior Engineer Interview Questions and Answers

Updated 13 Mar 2023

Assystem Junior Engineer Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Who are you and answer
Round 3 - Technical 

(1 Question)

  • Q1. Cement ka initial setting time
  • Ans. 

    Initial setting time of cement is the time taken by cement to harden and resist penetration by a standard needle.

    • Initial setting time is affected by factors like temperature, water-cement ratio, and type of cement.

    • The standard needle used for testing has a diameter of 1.13 mm and a length of 50 mm.

    • The initial setting time of ordinary Portland cement is around 30 minutes.

    • The initial setting time of rapid hardening cemen

  • Answered by AI
Round 4 - Aptitude Test 

Lime test stone test brick test

Round 5 - One-on-one 

(1 Question)

  • Q1. All round test complete

Interview Preparation Tips

Interview preparation tips for other job seekers - Google baba and social media marketing source all test etc

Interview questions from similar companies

I applied via Company Website and was interviewed in Jan 2022. There were 5 interview rounds.

Round 1 - Technical 

(10 Questions)

  • Q1. As for drawing work and excavation work
  • Q2. Excavation proper level and drawing work
  • Q3. Level and coordinate proper work
  • Q4. Drawing for BBS and shuttering work
  • Q5. Management rebar and shuttering
  • Q6. As for drawing work and drawing proper seen
  • Q7. Work in experience 3 years
  • Q8. DPR and work timely and work Target
  • Q9. Dailly duty and emergency work holidays
  • Q10. Concrete work level and finishing work fine
  • Ans. 

    My concrete work level is excellent and I have experience in various finishing techniques.

    • I have experience in pouring and leveling concrete for foundations, walls, and slabs.

    • I am skilled in using various finishing techniques such as troweling, stamping, and staining.

    • I pay close attention to detail to ensure a smooth and even finish.

    • I am knowledgeable in the proper curing and sealing of concrete to ensure its longevity...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Rebar and shuttering work
Round 3 - Technical 

(1 Question)

  • Q1. BBS for drwaing work
  • Ans. 

    BBS stands for Bar Bending Schedule, which is a detailed list of reinforcement bars in a structure.

    • BBS is used in drawing work to ensure the correct amount of reinforcement is used in a structure.

    • It includes details such as bar diameter, length, shape, and placement.

    • BBS helps in estimating the amount of steel required for a project and also helps in cost estimation.

    • It is an important part of the construction process an...

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Rebar and shuttering work
Round 5 - Technical 

(2 Questions)

  • Q1. Drawing for level and Finnish
  • Q2. Coordinate proper and management

Interview Preparation Tips

Interview preparation tips for other job seekers - Civil engineer work Reinforcement and shuttering and concrete work

I applied via Company Website and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Reinforcement work and excavation work
  • Q2. Excavation level and coordinate work

Interview Preparation Tips

Topics to prepare for Doosan Power Systems Site Engineer interview:
  • Positive thinking
  • Working time mind no mistake
Interview preparation tips for other job seekers - As for drawing work and level finishing work

I applied via Naukri.com and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Reinforcement and excavation and
  • Q2. As for drawing work and level
  • Q3. Level and coordinate

Interview Preparation Tips

Interview preparation tips for other job seekers - Rebar BBS As for drawing and proper drawing work

I applied via Company Website and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is impidance,DGR FUNDAMENTAL AND BASICS
  • Ans. 

    Impedance is the measure of opposition to the flow of electric current in a circuit. DGR fundamental refers to the Dielectric Withstand Voltage test.

    • Impedance is measured in ohms and is the combination of resistance, capacitance, and inductance in a circuit.

    • DGR fundamental is a test to determine the maximum voltage a material can withstand without breaking down.

    • Basics of impedance include understanding the relationship...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear basics fundamental of electrical

I applied via Naukri.com and was interviewed in Nov 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is impedance ,reacance
  • Ans. 

    Impedance is the total opposition to the flow of alternating current in a circuit, while reactance is the opposition to the flow of alternating current caused by capacitance or inductance.

    • Impedance is a combination of resistance and reactance in a circuit.

    • Reactance is the opposition to the flow of alternating current caused by capacitance or inductance.

    • Capacitive reactance is the opposition to the flow of alternating c...

  • Answered by AI
  • Q2. How calculate plant load factors
  • Ans. 

    Plant load factor is calculated by dividing the actual energy generated by the maximum possible energy that could have been generated.

    • Plant load factor = Actual energy generated / Maximum possible energy that could have been generated

    • Maximum possible energy is calculated by multiplying the rated capacity of the plant with the number of hours in a given time period

    • Plant load factor is expressed as a percentage

    • It is used...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on fundamental, And answer with clear mindset
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic Study

Round 3 - One-on-one 

(1 Question)

  • Q1. Past Experience, Current Roles and responsibilities, Work Experience, Skills, Basics,
Round 4 - HR 

(6 Questions)

  • Q1. Tell me about yourself.
  • Q2. What are your salary expectations?
  • Q3. What is your family background?
  • Q4. Share details of your previous job.
  • Q5. Why should we hire you?
  • Q6. Why are you looking for a change?

Interview Preparation Tips

Interview preparation tips for other job seekers - Best Of Luck For Your Bright Future

I appeared for an interview in Oct 2017.

Interview Questionnaire 

2 Questions

  • Q1.  acpcited package
  • Q2. Package discussion

Interview Preparation Tips

Round: Resume Shortlist
Experience: This round few candets selected
Tips: Your selected for only experience candets



Round: Group Discussion
Experience: To avoid the water pollution.
Air pollution.sound pollution etc
Tips: Lettered
Duration: 1 hour

Round: HR Interview
Experience: Cleared the final package
Tips: Work experience

Skills: Break Down Analysis

Interview Questionnaire 

1 Question

  • Q1. Normal question about personality and job related

Interview Preparation Tips

Round: Test
Experience: Interview was going smoothly & all questions was related my job so it's was easy for me.
Tips: Good knowledge about of wind turbine
Duration: 2 hours
Total Questions: 25

Round: HR Interview
Experience: Interview was completed so easy
Tips: Required nice personality and confidence is must required

Interview Questionnaire 

1 Question

  • Q1. 1.what is torque.?2-how to gear box work.?3-what is the reason of torque limiter failure?4-what is the reason of coupling failure?5-in which bearing used yawing system?6-what is accumlator and how its work...
  • Ans. 

    Questions related to torque, gearbox, torque limiter and coupling failure, yawing system bearing, and accumulator.

    • Torque is a measure of rotational force.

    • Gearbox works by transmitting power from the engine to the wheels.

    • Torque limiter failure can be caused by overloading or overheating.

    • Coupling failure can be caused by misalignment or excessive torque.

    • Yawing system bearing is a type of roller bearing used to support th...

  • Answered by AI

Assystem Interview FAQs

How many rounds are there in Assystem Junior Engineer interview?
Assystem interview process usually has 5 rounds. The most common rounds in the Assystem interview process are Resume Shortlist, HR and Technical.
What are the top questions asked in Assystem Junior Engineer interview?

Some of the top questions asked at the Assystem Junior Engineer interview -

  1. Cement ka initial setting t...read more
  2. All round test compl...read more

Tell us how to improve this page.

Assystem Junior Engineer Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more

Assystem Junior Engineer Reviews and Ratings

based on 7 reviews

2.0/5

Rating in categories

2.6

Skill development

4.2

Work-life balance

2.2

Salary

2.1

Job security

1.9

Company culture

2.9

Promotions

1.9

Work satisfaction

Explore 7 Reviews and Ratings
Design Engineer
80 salaries
unlock blur

₹3.6 L/yr - ₹13.3 L/yr

Assistant Design Engineer
52 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Structural Design Engineer
50 salaries
unlock blur

₹3.3 L/yr - ₹12.5 L/yr

Consultant Engineer
49 salaries
unlock blur

₹4.8 L/yr - ₹10 L/yr

Senior Manager
32 salaries
unlock blur

₹12.5 L/yr - ₹32 L/yr

Explore more salaries
Compare Assystem with

Suzlon Group

4.1
Compare

Torrent Power

3.7
Compare

Eaton

3.9
Compare

Vestas

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview