Upload Button Icon Add office photos

Filter interviews by

Aquarius Engineers Service Engineer Interview Questions and Answers

Updated 29 Sep 2023

Aquarius Engineers Service Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Related to your Knowledge product .

Technical Discussion about product .

Round 3 - HR 

(5 Questions)

  • Q1. Good Discussion with HR Department .
  • Q2. Salary Discussion
  • Q3. Explained the Policies HR
  • Q4. Technical Questions related to Machine Circuit .Discussion
  • Q5. Some Troubleshooing Questions Discussion related to open loop and closed loop Circuit . Symbols etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Good working culture in this company.

Interview was good .

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the difference between alternating current (AC) and direct current (DC)?
  • Q2. What is grounding?
  • Q3. What is theNNewton's 2nd law
Round 2 - HR 

(2 Questions)

  • Q1. What prompted your transition from the medical field to your current profession?
  • Q2. Why is your permanent location required for work?

Interview Preparation Tips

Interview preparation tips for other job seekers - During the interview, you can only discuss TADA and leave policies.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. I am doing engine overhualing transmission and hydraulic component inspection and overhauling
  • Q2. I am doing Hydraulic Complaint and pump dismantle and reassemble

Interview Preparation Tips

Interview preparation tips for other job seekers - 3Years experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the difference between AC Drive and DC Drive
  • Ans. 

    AC drives are used for controlling the speed of AC motors, while DC drives are used for controlling the speed of DC motors.

    • AC drives are used for controlling the speed of AC motors by varying the frequency of the input power.

    • DC drives are used for controlling the speed of DC motors by varying the voltage supplied to the motor.

    • AC drives are more commonly used in industrial applications due to the prevalence of AC power ...

  • Answered by AI
  • Q2. What is the difference between SI and CI engine
  • Ans. 

    SI engines use spark plugs for ignition, while CI engines use compression for ignition.

    • SI engines have spark plugs to ignite the air-fuel mixture, while CI engines rely on compression to ignite the fuel.

    • SI engines are commonly used in gasoline vehicles, while CI engines are typically found in diesel vehicles.

    • SI engines have a higher power output compared to CI engines.

    • SI engines have a higher fuel efficiency compared t

  • Answered by AI
  • Q3. What is the specific gravity of battery
  • Ans. 

    Specific gravity of a battery is a measure of its electrolyte's density compared to water.

    • Specific gravity is typically measured using a hydrometer.

    • It indicates the state of charge of a lead-acid battery.

    • A fully charged lead-acid battery will have a specific gravity of around 1.265.

    • A discharged battery will have a lower specific gravity, around 1.150.

  • Answered by AI
  • Q4. What is Hydraulic pump
  • Ans. 

    A hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy by generating flow within a hydraulic system.

    • Hydraulic pumps are used to generate flow to move fluids within a hydraulic system.

    • They are commonly used in applications such as construction equipment, automotive systems, and industrial machinery.

    • There are different types of hydraulic pumps, including gear pumps, vane pumps, and p...

  • Answered by AI
  • Q5. Difference between hydraulic and pneumatic system
  • Ans. 

    Hydraulic systems use liquid to transmit power, while pneumatic systems use gas.

    • Hydraulic systems use oil or water as the fluid medium, while pneumatic systems use air or other gases.

    • Hydraulic systems are typically used in heavy-duty applications like construction equipment, while pneumatic systems are used in lighter applications like air brakes in vehicles.

    • Hydraulic systems are generally more powerful and can handle ...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Toyota Material Handling Service Engineer interview:
  • Automobile
  • Electric Vehicle
Round 1 - One-on-one 

(1 Question)

  • Q1. Basic of knowledge and training

Interview Preparation Tips

Interview preparation tips for other job seekers - Best company to work with! Good environment and supportive management.

I applied via Recruitment Consultant

Interview Questionnaire 

2 Questions

  • Q1. Questions ask me about Measurements Metrology & Non destructive testing.
  • Q2. 1. Type of MM & how to drive tool & uses. 2. Definition of Ndt & it's industrial uses.
  • Ans. 

    MM types include micrometers, calipers, and gauges. NDT is non-destructive testing used in industries to detect flaws in materials.

    • MM tools are used to measure dimensions of objects accurately

    • Examples of MM tools include micrometers, calipers, and gauges

    • NDT is a testing method used to detect flaws in materials without causing damage

    • NDT is used in industries such as aerospace, automotive, and construction

    • NDT methods inc...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This Interview was a technical one. The interviewer wanted to test both my knowledge Experience & Communication skills.Most of the questions asked to my Btech subject.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the AC DC transformer moter automation
  • Ans. 

    AC DC transformer motor automation is a process of controlling and regulating the operation of a motor using an AC DC transformer.

    • AC DC transformer motor automation involves converting AC power to DC power using a transformer.

    • The DC power is then used to control and regulate the operation of a motor.

    • This automation process allows for efficient and precise control of motor speed, torque, and direction.

    • Examples of AC DC ...

  • Answered by AI
  • Q2. Technical question AC

Interview Preparation Tips

Interview preparation tips for other job seekers - I am working as a service Engineer in Moradabad and am 8 year experience
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Draw a basic Hydraulic circuit and expain ?
  • Ans. 

    A hydraulic circuit is a system that uses pressurized fluid to transmit power.

    • A hydraulic pump is used to create pressure in the fluid.

    • Valves control the flow of fluid through the circuit.

    • Actuators, such as cylinders or motors, convert the fluid pressure into mechanical force.

    • A reservoir stores the fluid and a filter removes contaminants.

    • Examples include excavators, cranes, and hydraulic presses.

  • Answered by AI
  • Q2. What is tappet setting required in engines ?
  • Ans. 

    Tappet setting is the process of adjusting the clearance between the tappet and the valve stem in an engine.

    • Tappet setting ensures proper valve timing and prevents engine damage.

    • It involves adjusting the clearance between the tappet and the valve stem using a feeler gauge.

    • The correct tappet setting varies depending on the engine model and manufacturer.

    • Incorrect tappet setting can cause engine noise, poor performance, a...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Study technical like electrical and hydraulics thorughly

I applied via Recruitment Consulltant and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Principal of hydraulic,how engine work, Proportional valves, valve block, types of hyd. Pump, hyd. Circuits, electrical circuit, working culture, customer handling, field experience etc
  • Ans. 

    The interview covered topics such as hydraulic principles, engine workings, proportional valves, valve blocks, types of hydraulic pumps, hydraulic and electrical circuits, working culture, customer handling, and field experience.

    • Hydraulic principles involve the use of fluids to generate power and control movement.

    • Engines work by converting fuel into energy, which is then used to power the vehicle or machine.

    • Proportiona...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Previous salary, why we hire you, experience, expected salary,why you want to join our company etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare whatever you written in your resume
Basic knowledge of current work and where it used

I applied via Approached by Company and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basic hydraulic symbols

Interview Preparation Tips

Interview preparation tips for other job seekers - This is worst management don't join this company.
No any career growth once joined this company
Interview process is basic hydraulic symbols only.

Aquarius Engineers Interview FAQs

How many rounds are there in Aquarius Engineers Service Engineer interview?
Aquarius Engineers interview process usually has 3 rounds. The most common rounds in the Aquarius Engineers interview process are Resume Shortlist, Group Discussion and HR.
What are the top questions asked in Aquarius Engineers Service Engineer interview?

Some of the top questions asked at the Aquarius Engineers Service Engineer interview -

  1. Some Troubleshooing Questions Discussion related to open loop and closed loop ...read more
  2. Technical Questions related to Machine Circuit .Discussi...read more
  3. Good Discussion with HR Departmen...read more

Tell us how to improve this page.

Aquarius Engineers Service Engineer Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more
Aquarius Engineers Service Engineer Salary
based on 22 salaries
₹2.3 L/yr - ₹5.3 L/yr
14% more than the average Service Engineer Salary in India
View more details

Aquarius Engineers Service Engineer Reviews and Ratings

based on 3 reviews

4.4/5

Rating in categories

3.2

Skill development

4.0

Work-life balance

3.6

Salary

4.7

Job security

3.6

Company culture

3.2

Promotions

3.2

Work satisfaction

Explore 3 Reviews and Ratings
Service Engineer
22 salaries
unlock blur

₹2.3 L/yr - ₹5.3 L/yr

Senior Service Engineer
22 salaries
unlock blur

₹4.2 L/yr - ₹8.2 L/yr

Store Executive
12 salaries
unlock blur

₹2.5 L/yr - ₹4.5 L/yr

Senior Engineer
8 salaries
unlock blur

₹4.5 L/yr - ₹5.5 L/yr

Assistant Manager
7 salaries
unlock blur

₹6.8 L/yr - ₹9 L/yr

Explore more salaries
Compare Aquarius Engineers with

Schwing Stetter

4.1
Compare

Putzmeister India

3.8
Compare

Kyb Conmat

4.1
Compare

Ajax Fiori Engineering

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview