30+ Seed Innovations Interview Questions and Answers

The unit weight of reinforcement bar can be found by calculating the weight per unit length.

• The unit weight of reinforcement bar is calculated by dividing the weight of the bar by its length.

• The weight of the bar can be determined by multiplying the cross-sectional area of the bar by the density of the material.

• The length of the bar is measured in meters or feet, depending on the unit system used.

• The density of the material can be obtained from reference tables or material sp...read more

Yes, bar bending schedule is calculated by determining the number, length, and shape of bars required for a reinforced concrete structure.

• Calculate the total length of bars required for each size and type

• Determine the number of bars required for each size and type

• Calculate the shape and bending details of each bar

• Prepare a detailed schedule of all the bars required for the structure

• Ensure compliance with design and construction standards

Concrete cubes break more at the middle due to the distribution of stress and the presence of weak points.

• The middle of the cube experiences the highest stress during compression testing.

• The distribution of stress is not uniform throughout the cube.

• The presence of weak points, such as air voids or aggregate discontinuities, can cause the cube to break at the middle.

• The middle of the cube is where the maximum compressive force is applied.

• Factors like improper curing, improper ...read more

Unit weights of building materials are important for quantity surveying.

• Unit weight of concrete is around 2400 kg/m³

• Unit weight of brick is around 1920 kg/m³

• Unit weight of steel is around 7850 kg/m³

• Unit weight of timber is around 500 kg/m³

• Unit weight of glass is around 2500 kg/m³

Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.

• Range density of bentonite is typically between 17-22 lb/gal.

• Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.

• The range density of bentonite is important for determining its effectiveness in different applications.

• Higher range density of bentonite is preferred for sealing purposes to prevent ...read more

Concrete mix design is a process of determining the proportions of various ingredients to achieve desired properties of concrete.

• Concrete mix design involves selecting suitable materials and determining their proportions.

• The mix design considers factors such as strength, workability, durability, and economy.

• IS standards, such as IS 10262, provide guidelines for concrete mix design in India.

• The design process includes calculating water-cement ratio, aggregate-cement ratio, and...read more

To judge the product physically, perform visual inspections, measurements, and functional tests.

• Conduct visual inspections to check for any defects or abnormalities in the product's appearance.

• Perform measurements to ensure the product meets the required specifications and tolerances.

• Conduct functional tests to verify that the product performs its intended functions correctly.

• Compare the physical attributes of the product with the established standards or benchmarks.

• Use speci...read more

The procedure for billing involves preparing an invoice based on the work completed and submitting it to the client for payment.

• Review the contract to ensure all work completed is billable

• Prepare an invoice detailing the work completed and the corresponding costs

• Submit the invoice to the client for payment within the agreed upon timeframe

• Follow up with the client to ensure payment is received on time

Manpower productivity refers to the efficiency of workers in completing tasks within a given timeframe.

• It is important to measure and track productivity to identify areas for improvement.

• Factors that can affect productivity include training, equipment, and work environment.

• Productivity can be improved through better planning, organization, and communication.

• Examples of productivity measures include output per worker, time to complete tasks, and error rates.

• Regular performance...read more

QA focuses on preventing defects in the software development process, while QC focuses on identifying defects in the final product.

• QA stands for Quality Assurance and QC stands for Quality Control.

• QA is a proactive process that focuses on preventing defects by establishing processes and standards, while QC is a reactive process that focuses on identifying defects in the final product.

• QA involves activities like requirement analysis, test planning, and process improvement, whi...read more

Subcontractor TDS rates vary based on the nature of work and GST is applicable on the total value of the contract.

• Subcontractor TDS rates range from 1% to 10% depending on the type of work and the payment threshold.

• GST is applicable on the total value of the contract, including the amount paid to the subcontractor.

• If the subcontractor is registered under GST, the contractor can claim input tax credit on the GST paid to the subcontractor.

• If the subcontractor is not registered ...read more

Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.

• Static load test involves applying a constant load to a structure and measuring its response over time.

• Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.

• Static load test helps determine the maximum load a structure can bear without failure.

• Dynamic load...read more

Bending movement in a simple supported beam refers to the deformation caused by external loads, resulting in curvature along the length of the beam.

• Bending movement is caused by external loads applied to a beam, resulting in stress and deformation.

• The beam experiences tension on one side and compression on the other, leading to curvature.

• The maximum bending moment occurs at the center of the beam, where the curvature is highest.

• Bending movement is crucial to consider in struc...read more

There are four deductions of 90 degree angles.

• A 90 degree angle is formed when two lines intersect at a right angle.

• In a square, all four angles are 90 degrees.

• In a rectangle, opposite angles are 90 degrees.

• In a right triangle, one angle is always 90 degrees.

The number of tolerance of pile load test depends on the specific project requirements and standards.

• The number of tolerance of pile load test can vary based on the project specifications and standards.

• Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.

• Some projects may have more stringent tolerance requirements depending on the criticality of the structure.

• It is important to refer to the project specifications and standards to determine ...read more

Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.

• To prepare for further construction on top of the piles

• To ensure proper load transfer to the foundation

• To facilitate the installation of pile caps or beams

• To adjust the pile length if necessary

Proficient in Microsoft Office Suite and fluent in English and Spanish.

• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint)

• Fluent in English and Spanish

• Experience with inventory management software

• Basic knowledge of HTML and CSS

• Ability to quickly learn new software programs

The procedure of stores involves the management and control of inventory, including receiving, storing, issuing, and maintaining records.

• Receiving goods and materials from suppliers

• Inspecting and verifying the received items

• Storing the items in appropriate locations

• Maintaining inventory records and updating stock levels

• Issuing items as per requisitions or orders

• Ensuring proper documentation and record-keeping

• Conducting regular stock audits and reconciliations

• Implementing prop...read more

The units of strain are dimensionless.

• Strain is a measure of deformation or change in shape of a material.

• It is calculated as the change in length divided by the original length.

• Since strain is a ratio of lengths, it is dimensionless.

• Common units for strain include microstrain (με) and parts per million (ppm).

Shuttering level can be checked using a spirit level to ensure it is horizontal or vertical.

• Use a spirit level to check if the shuttering is horizontal or vertical

• Ensure the bubble in the spirit level is centered to indicate level

• Adjust the shuttering as needed to achieve the correct level

• Check multiple points along the shuttering to ensure consistency

Handling power substation store involves managing inventory, equipment, and supplies for maintenance and repairs.

• Maintain accurate inventory records to track supplies and equipment

• Implement a system for organizing and storing items efficiently

• Regularly inspect and maintain equipment to ensure functionality

• Coordinate with suppliers to replenish stock as needed

• Train staff on proper handling and storage procedures

Progress of work can be tracked through regular updates, milestones, and key performance indicators.

• Regularly update project timelines and task lists

• Set milestones to track progress towards larger goals

• Monitor key performance indicators to measure success and identify areas for improvement

Cover blocks made of concrete or plastic are used in columns to maintain the specified distance between the reinforcement and the surface.

• Cover blocks are used to prevent the reinforcement from coming into contact with the surrounding environment.

• They help in maintaining the specified cover or distance between the reinforcement and the surface.

• Cover blocks can be made of concrete or plastic materials.

• Concrete cover blocks are typically made on-site using concrete mix.

• Plastic ...read more

To manage stores effectively, one must focus on inventory control, organization, and efficient procurement processes.

• Implement a robust inventory management system to track stock levels and ensure timely replenishment.

• Categorize and label products for easy identification and retrieval.

• Establish proper storage and shelving systems to maximize space utilization.

• Regularly conduct stock audits to identify discrepancies and prevent theft or loss.

• Maintain good relationships with su...read more

Rate analysis of waterproofing involves calculating the cost of materials, labor, and equipment needed for waterproofing work.

• Calculate the quantity of materials required for waterproofing (e.g. membrane, sealant, primer)

• Determine the cost of materials per unit (e.g. cost per square meter of membrane)

• Estimate the labor cost based on the time required for waterproofing work

• Include the cost of equipment rental or purchase if needed

• Factor in overhead costs and profit margin to d...read more

Prefer to work in urban areas with easy access to public transportation and amenities.

• Prefer urban areas over rural areas

• Look for locations with good public transportation options

• Consider proximity to amenities such as restaurants, shops, and gyms

RA bill process involves verification of work done, measurement, calculation of quantities, and certification for payment.

• Verification of work done by site inspection

• Measurement of completed work using drawings and specifications

• Calculation of quantities based on approved rates

• Certification of bill for payment by client or consultant

Unit weight of steel is typically around 7850 kg/m^3.

• Unit weight of steel is commonly expressed in kg/m^3.

• The unit weight of steel can vary depending on the type of steel being used.

• For example, the unit weight of mild steel is approximately 7850 kg/m^3.

Stress is a physical, mental, or emotional factor that causes bodily or mental tension.

• Stress can be caused by various factors such as work pressure, relationship issues, financial problems, or health concerns.

• It can manifest in physical symptoms like headaches, muscle tension, or stomach issues.

• Chronic stress can lead to long-term health problems like heart disease, depression, or anxiety disorders.