Upload Button Icon Add office photos

Filter interviews by

Allena Auto Industries Interview Questions and Answers

Updated 2 Feb 2025

Allena Auto Industries Interview Experiences

Popular Designations

6 interviews found

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Not Selected

I applied via Indeed and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Where is last job
  • Ans. 

    My last job was at XYZ Company, a multinational corporation located in downtown area.

    • Worked at XYZ Company

    • Multinational corporation

    • Located in downtown area

  • Answered by AI
  • Q2. Work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst company

Back Office Assistant Interview Questions asked at other Companies

Q1. Tell me averthing please let me know if you need anything
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - HR 

(1 Question)

  • Q1. General Details of work experience and knowledge of 5S
Round 2 - Technical 

(3 Questions)

  • Q1. Questions regarding Six Sigma and lean manufacturing
  • Q2. Ppm etc.
  • Q3. Geometric dimensioning and tolerancing
Round 3 - Aptitude Test 

Knowledge of Instruments
Knowledge of Inspection Methods
Knowledge of Documents related to Quality

Interview Preparation Tips

Interview preparation tips for other job seekers - Always remember what you are doing in present company and don't mention the things on cv which gives negative impact on interviewers.

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (10)

QC Inspector Interview Questions & Answers

user image Anonymous

posted on 15 Jan 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. What is least count of vernier caliper?
  • Ans. 

    The least count of vernier caliper is the smallest measurement that can be read on the scale.

    • The least count is determined by the number of divisions on the vernier scale and the main scale.

    • It is usually 0.02 mm or 0.001 inches for a standard vernier caliper.

    • To determine the least count, subtract the main scale reading from the vernier scale reading.

    • For example, if the main scale reading is 5 mm and the vernier scale r

  • Answered by AI
  • Q2. Can you travel Long distance?
  • Ans. 

    Yes, I am willing to travel long distances for work.

    • I have no issues with traveling long distances for work

    • I am comfortable with long flights and car rides

    • I have traveled long distances for work in the past, including international trips

  • Answered by AI
  • Q3. Can you read drawings?
  • Ans. 

    Yes, I can read drawings.

    • I have experience in interpreting technical drawings and blueprints.

    • I am familiar with symbols, dimensions, and tolerances used in drawings.

    • I can identify different views and sections in a drawing.

    • I can also use software like AutoCAD and SolidWorks to view and analyze drawings.

    • For example, I have inspected welding drawings for a construction project and ensured compliance with specifications.

  • Answered by AI
  • Q4. What do you know about Design?
  • Ans. 

    Design refers to the process of creating a plan or blueprint for a product or system.

    • Design involves identifying the problem, researching, brainstorming, and creating a prototype.

    • It includes considering factors such as functionality, aesthetics, usability, and cost.

    • Examples of design include graphic design, industrial design, and software design.

    • Design is an important aspect of quality control as it ensures that produc

  • Answered by AI
  • Q5. What salary are you expecting?

Interview Preparation Tips

Topics to prepare for Allena Auto Industries QC Inspector interview:
  • Machine Drawing
  • Instrumentation
  • Design
Interview preparation tips for other job seekers - Have a minimum knowledge of technical aspects of instruments and basic knowledge of design.
You should be able to read drawings and make reports.
They will ask you sound questions since they work with big companies like maruti tata Eicher etc.

QC Inspector Interview Questions asked at other Companies

Q1. What is inspected you before during and after welding ?
View answer (2)

Interview Questions & Answers

user image jitendar sharma

posted on 6 Jul 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Quality knowledge
  • Q2. Quality knowledge basic
Round 2 - Technical 

(2 Questions)

  • Q1. Quality knowledge
  • Q2. About background and stability of job
Round 3 - HR 

(2 Questions)

  • Q1. Salary discussion
  • Q2. Salary dicscussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall is good

Allena Auto Industries interview questions for popular designations

 Quality Engineer

 (2)

 Back Office Assistant

 (1)

 QC Inspector

 (1)

 CNC Programmer and Operator

 (1)

Round 1 - CNC PROGRAMMING AND Operating 

(1 Question)

  • Q1. CNC PROGRAMMING AND OPERATING

Interview Preparation Tips

Interview preparation tips for other job seekers - So Good cultur

Good skill development
Better experience

Interview Questionnaire 

1 Question

  • Q1. What ever you have written in your resume or cv , be prepared for the question answer. So always write the truth into your cv or resume.

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (10)

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About my experience and my knowledge of my professional experience
  • Q2. About drawings and GD&T knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - Good interview that is the most respective interview in my life

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is
  • Ans. 

    The question is incomplete or missing.

    • Please provide the complete question for a proper answer.

  • Answered by AI
  • Q2. What is molds products?
  • Ans. 

    Molded products are items created by shaping a material into a specific form using a mold.

    • Molded products are made by pouring or injecting a material into a mold and allowing it to solidify or cure.

    • The mold determines the shape and size of the final product.

    • Common examples of molded products include plastic containers, automotive parts, and rubber seals.

    • Molded products are often used in manufacturing industries for the...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interviewer was a technical knowledge. Intervieer seen have a technical knowledge and combustion knowledge and your dishpline.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 5 interview rounds.

Round 1 - Aptitude Test 

General knowledge questions and reasoning aptitude test.

Round 2 - Technical 

(2 Questions)

  • Q1. What is your understanding of Geometric Dimensioning and Tolerancing (GD&T) and its application in technical drawings?
  • Ans. 

    GD&T is a system for defining and communicating engineering tolerances on technical drawings.

    • GD&T is a symbolic language used to specify the form, orientation, and location of features on a part.

    • It allows engineers to clearly communicate design requirements to manufacturers.

    • GD&T uses symbols such as concentricity, perpendicularity, flatness, and position to define tolerances.

    • It helps ensure parts are manufa...

  • Answered by AI
  • Q2. About 7qc tools, ISO &IATF
Round 3 - Technical 

(1 Question)

  • Q1. What can you explain about the processes at your last company?
  • Ans. 

    At my last company, I was responsible for overseeing and improving various processes to ensure quality standards were met.

    • Implemented statistical process control methods to monitor and improve production processes

    • Conducted root cause analysis to identify and address quality issues

    • Collaborated with cross-functional teams to implement corrective and preventive actions

    • Developed and updated quality documentation and proced...

  • Answered by AI
Round 4 - HR 

(2 Questions)

  • Q1. What was your last salary, and what were the reasons for leaving your previous company?
  • Ans. 

    I prefer not to disclose my previous salary, but I left my previous company to pursue new opportunities for growth and development.

    • Prefer not to disclose previous salary

    • Left for new opportunities for growth

    • Seeking new challenges and development

  • Answered by AI
  • Q2. What are your expectations?
  • Ans. 

    I expect to work in a challenging environment where I can utilize my skills to improve quality standards.

    • Expect to work on continuous improvement projects

    • Seek opportunities to implement quality control measures

    • Desire to collaborate with cross-functional teams to ensure quality standards are met

  • Answered by AI
Round 5 - One-on-one 

(1 Question)

  • Q1. What is your formal introduction?
  • Ans. 

    I am a Quality Engineer with 5 years of experience in manufacturing industry, specializing in process improvement and quality control.

    • 5 years of experience in manufacturing industry

    • Specialize in process improvement and quality control

    • Certified in Six Sigma and Lean Manufacturing

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. About your self

Allena Auto Industries Interview FAQs

How many rounds are there in Allena Auto Industries interview?
Allena Auto Industries interview process usually has 2 rounds. The most common rounds in the Allena Auto Industries interview process are Technical, HR and Aptitude Test.
How to prepare for Allena Auto Industries interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Allena Auto Industries. The most common topics and skills that interviewers at Allena Auto Industries expect are 2D Drafting, 3D Modeling, AutoCAD, Business Development and Client Relationship Management.
What are the top questions asked in Allena Auto Industries interview?

Some of the top questions asked at the Allena Auto Industries interview -

  1. What is least count of vernier calip...read more
  2. What do you know about Desi...read more
  3. Can you travel Long distan...read more

Tell us how to improve this page.

Allena Auto Industries Interview Process

based on 7 interviews

Interview experience

3.3
  
Average
View more

Interview Questions from Similar Companies

Global Autotech Interview Questions
4.0
 • 47 Interviews
Ag Industries Interview Questions
4.0
 • 41 Interviews
Mikuni Interview Questions
4.2
 • 21 Interviews
Alf Engineering Interview Questions
4.0
 • 21 Interviews
EXEDY Interview Questions
3.6
 • 21 Interviews
View all

Allena Auto Industries Reviews and Ratings

based on 77 reviews

3.2/5

Rating in categories

3.3

Skill development

2.7

Work-life balance

2.6

Salary

3.2

Job security

2.8

Company culture

2.2

Promotions

2.9

Work satisfaction

Explore 77 Reviews and Ratings
Quality Engineer
34 salaries
unlock blur

₹1.5 L/yr - ₹4.5 L/yr

Quality Inspector
15 salaries
unlock blur

₹1.7 L/yr - ₹3.2 L/yr

Account Assistant
8 salaries
unlock blur

₹1.8 L/yr - ₹2.4 L/yr

Senior Engineer- Maintenance
7 salaries
unlock blur

₹4.2 L/yr - ₹5.2 L/yr

Production Supervisor
7 salaries
unlock blur

₹2 L/yr - ₹3 L/yr

Explore more salaries
Compare Allena Auto Industries with

Ag Industries

4.0
Compare

Toyoda Gosei Minda

4.2
Compare

Global Autotech

4.0
Compare

Mikuni

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview