Upload Button Icon Add office photos
Premium Employer

i

This company page is being actively managed by Advanced Micro Devices Team. If you also belong to the team, you can get access from here

Advanced Micro Devices Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Advanced Micro Devices Dft Design Engineer Interview Questions and Answers

Updated 13 Sep 2024

Advanced Micro Devices Dft Design Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(3 Questions)

  • Q1. Coverage improvement
  • Q2. Atpg flow and inputs
  • Q3. Have your faced any violations
  • Ans. 

    No violations faced

    • No, I have not faced any violations in my career

    • I always make sure to adhere to all rules and regulations in my work

    • I prioritize ethical conduct and compliance with industry standards

  • Answered by AI

Interview questions from similar companies

I applied via Referral and was interviewed in Jun 2022. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. 1st round with hiring manager.Discussion with hiring manager. Reason for switch. Then technical questions on how to debug and find failure flops in a chain. Basic loc,los, loes lock-up latch questions. Why...
  • Q2. 3 2 hour interviews were taken( Total 6 hours with 1 people in each round). Questions: how we can reduce test time. how serial chain patterns are solved. How T24 violations are debugged, how we can find wh...
  • Q3. How compression ratio can be tweaked, what are the factors ( how coverage, Patten count gets impacted).
  • Ans. 

    Compression ratio can be tweaked by adjusting the volume of the combustion chamber. This affects fuel efficiency and power output.

    • Compression ratio is the ratio of the volume of the combustion chamber at its largest to its smallest.

    • Increasing compression ratio can improve fuel efficiency and power output, but too high a ratio can cause engine knocking.

    • Factors that impact compression ratio include the size and shape of ...

  • Answered by AI
  • Q4. How have I observed hold violations and setup violations in my design. What I did after that, etc
  • Ans. 

    I have observed hold and setup violations in my design and took necessary actions.

    • I used static timing analysis (STA) to identify hold and setup violations.

    • I fixed hold violations by adding delay cells or increasing clock period.

    • I fixed setup violations by reducing delay or decreasing clock period.

    • I also checked for false paths and multi-cycle paths.

    • I re-ran STA after fixing violations to ensure timing closure.

    • I docume...

  • Answered by AI
  • Q5. Purpose of occ controllers. What scan enable signals( pipelined or nonpiplelined) will go to my occ controller, clock chain and why. Lock up latch purpose. If I have 5 negative edge triggered flops and 5 p...
  • Ans. 

    Explanation of purpose of occ controllers, scan enable signals, lock up latch and arrangement of negative and positive edge triggered flops.

    • The purpose of occ controllers is to manage the clock signals in a design and ensure proper timing.

    • Scan enable signals are used for testing and debugging purposes.

    • Pipelined signals are used for faster data transfer while non-pipelined signals are used for simpler designs.

    • Lock up la...

  • Answered by AI
  • Q6. How can we reset a tap controller without trst signals. How do you find coverage gaps.
  • Ans. 

    Resetting a tap controller without trst signals and finding coverage gaps.

    • For resetting a tap controller without trst signals, we can use a power-on reset circuit or a watchdog timer.

    • To find coverage gaps, we can use code coverage analysis tools like CodeSonar, Coverity, or LDRA.

    • We can also use dynamic analysis tools like Valgrind or Purify to find runtime errors and coverage gaps.

    • Manual testing and peer code reviews c...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read basics well, know about your architecture, clock mechanisms and compression ratio concepts. Be well versed with your work in current company.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Good interview round
  • Q2. Full technical questions
  • Q3. What is dft basic
  • Ans. 

    DFT (Design for Testability) is a method used in electronics design to ensure that the product can be easily tested during manufacturing.

    • DFT involves designing the product in a way that makes it easy to test for faults or defects.

    • Techniques used in DFT include adding test points, scan chains, and built-in self-test features.

    • DFT helps reduce the time and cost of testing during manufacturing.

    • Example: Adding scan chains t...

  • Answered by AI
  • Q4. Write the verilog code
  • Ans. 

    Verilog code for Dft Design Engineer

    • Use Verilog syntax to describe digital circuits

    • Include modules, inputs, outputs, and logic gates in the code

    • Ensure proper indentation and formatting for readability

  • Answered by AI
  • Q5. Atpg, scan and simulation questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Do digital electronic and Dft concepts properly

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Write code of frequency divider
  • Q2. Difference between latch & flip flop

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Basic of electronics systems
Round 2 - One-on-one 

(1 Question)

  • Q1. Basic of digital electronics
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. First round was with DFT Head. He seemed little arrogant. Asked me basic DFT questions like wrapper architecture, working and how flops will be handled in case of setup and hold.
  • Q2. He also asked me about work I have done
Round 2 - Technical 

(1 Question)

  • Q1. This was 3 hours back to back interview. In first round, All questions were on scan architecture, need of lockup latches, ATPG Basics, compression architecture etc. Second round was more on the challenges ...

Interview Preparation Tips

Interview preparation tips for other job seekers - Go very well prepared even on the topics you have not worked on.

Design Engineer Interview Questions & Answers

Molex user image govekar prajwal

posted on 8 Jul 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Introduction about ourselves
Round 2 - One-on-one 

(1 Question)

  • Q1. Personal interview ( personality test )
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. STA , setup and hold?
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Internshala and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Questions based on experience and projects
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Electronic related questions were asked PCB related

Advanced Micro Devices Interview FAQs

How many rounds are there in Advanced Micro Devices Dft Design Engineer interview?
Advanced Micro Devices interview process usually has 1 rounds. The most common rounds in the Advanced Micro Devices interview process are One-on-one Round.
How to prepare for Advanced Micro Devices Dft Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Advanced Micro Devices. The most common topics and skills that interviewers at Advanced Micro Devices expect are ASIC, DFT, Digital Design, Linux and SOC.
What are the top questions asked in Advanced Micro Devices Dft Design Engineer interview?

Some of the top questions asked at the Advanced Micro Devices Dft Design Engineer interview -

  1. Coverage improvem...read more
  2. Atpg flow and inp...read more

Tell us how to improve this page.

Advanced Micro Devices Dft Design Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Qualcomm Interview Questions
3.8
 • 274 Interviews
Intel Interview Questions
4.2
 • 223 Interviews
Tata Electronics Interview Questions
4.0
 • 147 Interviews
Texas Instruments Interview Questions
4.1
 • 124 Interviews
Nvidia Interview Questions
3.7
 • 104 Interviews
Synopsys Interview Questions
3.8
 • 89 Interviews
Molex Interview Questions
3.9
 • 53 Interviews
View all
Advanced Micro Devices Dft Design Engineer Salary
based on 4 salaries
₹8.5 L/yr - ₹21.7 L/yr
27% more than the average Dft Design Engineer Salary in India
View more details
Senior Software Engineer
111 salaries
unlock blur

₹12.3 L/yr - ₹43 L/yr

Member Technical Staff
81 salaries
unlock blur

₹24 L/yr - ₹85 L/yr

Software Engineer
68 salaries
unlock blur

₹4.4 L/yr - ₹17.2 L/yr

Software Development Engineer II
49 salaries
unlock blur

₹9.9 L/yr - ₹35 L/yr

Senior Software Development Engineer
47 salaries
unlock blur

₹19.4 L/yr - ₹45 L/yr

Explore more salaries
Compare Advanced Micro Devices with

Intel

4.2
Compare

Nvidia

3.7
Compare

Broadcom

3.4
Compare

Micron Technology

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview