Upload Button Icon Add office photos

Adient

Compare button icon Compare button icon Compare

Filter interviews by

Adient Product Engineer Interview Questions and Answers

Updated 18 Dec 2023

Adient Product Engineer Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Seating related questions, GD&T, Manufacturing process, Sheetmetal and plastic guidelines
  • Q2. Regulations ECE and FMVSS and Design standards for Sheetmetal and plastic
  • Ans. 

    Regulations ECE and FMVSS and Design standards for Sheetmetal and plastic

    • ECE regulations are standards set by the United Nations Economic Commission for Europe for the safety and environmental performance of vehicles.

    • FMVSS refers to Federal Motor Vehicle Safety Standards, which are regulations set by the National Highway Traffic Safety Administration in the United States.

    • Design standards for sheet metal and plastic inv...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Not much questions, package and strength and weakness

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Company but package is very less. Good for learning automotive seating
Interview experience
3
Average
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Assignment 

CAD TEST, Plastic, Metal, Assembly

Round 3 - Technical 

(1 Question)

  • Q1. Seating Testing , Regulations, Gaps & clearance, Tolerance

Product Engineer Interview Questions Asked at Other Companies

asked in SquadStack
Q1. Left View of a Binary Tree Given a binary tree, your task is to p ... read more
asked in SquadStack
Q2. Arithmetic Expression Evaluation Problem Statement You are provid ... read more
asked in SquadStack
Q3. Reverse Words in a String: Problem Statement You are given a stri ... read more
asked in SquadStack
Q4. Longest Common Subsequence Problem Statement Given two strings ST ... read more
asked in SquadStack
Q5. Maximum Subarray Sum Problem Statement Given an array of integers ... read more

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Experience and about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare and give your best shot honestly

Interview Preparation Tips

Round: Test
Experience: more of experience gaining and learning new tricks of codding a program.
Tips: must focus on bugging and debugging the program.
Duration: 60 mins minutes

Skills: Coding Skills,
College Name: Invertis university
Motivation: bosch is a multinational company stating its rank worldwide.so anyone would to work with outstanding company.

Interview Questionnaire 

1 Question

  • Q1. Be bold you acn crack the interview

I applied via Campus Placement and was interviewed before Jul 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. C language questions, Arrays, Structures and pointers.
  • Q2. Questions about searching and sorting
  • Q3. Bit operations

Interview Preparation Tips

Interview preparation tips for other job seekers - For recruiting freshers they start with Aptitude and some basic electronics questions which is of 20 questions.
If you qualify, then technical round will be there. Starting with C language. Questions, started with basic questions first like Bit operations, arrays and pointers. If you answe them well they will go little deeper. Not too tough, if you know the concepts and good at C language.

May be the process will be different for experienced people.

I was interviewed in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Waht is your achievements
  • Ans. 

    I have achieved several milestones throughout my career as a Senior Engineer.

    • Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.

    • Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.

    • Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All most 3 Rounds they conducted, they taken 3 days for every round and they taken allmost 3 months to select... For learners this company was good...

I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What are the die casting and machining defects?
  • Ans. 

    Die casting and machining defects are common in manufacturing processes.

    • Die casting defects include porosity, shrinkage, cold shuts, and flash.

    • Machining defects include burrs, chatter marks, and tool marks.

    • Die casting defects can be caused by improper temperature, pressure, or metal flow.

    • Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.

    • Defects can lead to part failure, reduced

  • Answered by AI
  • Q2. What is the formula of filling and high speed ratio?
  • Ans. 

    Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.

    • Filling and high speed ratio formula is V/Q

    • V is the volume of the container and Q is the flow rate of the liquid

    • The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate

    • The higher the flow rate, the faster the c

  • Answered by AI
  • Q3. Why do u want to join Motherson?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always job needy in front of interviewer.

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV

Adient Interview FAQs

How many rounds are there in Adient Product Engineer interview?
Adient interview process usually has 3 rounds. The most common rounds in the Adient interview process are Resume Shortlist, Technical and HR.
How to prepare for Adient Product Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Adient. The most common topics and skills that interviewers at Adient expect are CATIA and Unigraphics.
What are the top questions asked in Adient Product Engineer interview?

Some of the top questions asked at the Adient Product Engineer interview -

  1. Regulations ECE and FMVSS and Design standards for Sheetmetal and plas...read more
  2. seating related questions, GD&T, Manufacturing process, Sheetmetal and plastic ...read more
  3. Seating Testing , Regulations, Gaps & clearance, Tolera...read more

Tell us how to improve this page.

Adient Product Engineer Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 334 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
DENSO Interview Questions
4.1
 • 72 Interviews
JTEKT Interview Questions
4.2
 • 65 Interviews
Tenneco Interview Questions
3.8
 • 60 Interviews
Faurecia Interview Questions
3.9
 • 59 Interviews
View all
Adient Product Engineer Salary
based on 183 salaries
₹7.3 L/yr - ₹16.5 L/yr
57% more than the average Product Engineer Salary in India
View more details

Adient Product Engineer Reviews and Ratings

based on 29 reviews

4.0/5

Rating in categories

4.1

Skill development

4.1

Work-life balance

3.5

Salary

4.1

Job security

4.3

Company culture

3.0

Promotions

3.7

Work satisfaction

Explore 29 Reviews and Ratings
Design Engineer
280 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
225 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Product Engineer
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

CAE Engineer
53 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineering Manager
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Adient with

Faurecia

3.9
Compare

Lear Corporation

4.0
Compare

Magna International

3.9
Compare

Bharat Forge

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview